Get the latest version of Coretemp where they fix the Tjunction back to 85.

Yeahoo.....   I did another stress test for 15hour n 40mins.... Left it overnite, when 2 skol.... Came back n its still alive....   So now, i dare 2 take da risk 2 OC @3.2 400x8
No problems detected in 17835232 iterations, bye!
StressCPU ran 15 hours, 41 minutes 8 seconds.
Execution halted.

Here, I copy n paste 4rom Orthos

But 1 thing i pelik   How come now da temp is at 53-55c @ full load??? B4 this is wuz 60-63c.... same speed... C my previous post got....   http://forum.lowyat.net/index.php?showtopi...post&p=15228953
 

[attachmentid=403294]

Neva tot I can boot and run SuperPI Mod 1m with that setting.. No BSOD or restart..
But i din stress wif orthos cause using stock cooler.. Sure fry..

OH yea guys, becareful when you set the vCore using EasyTune5 Pro..
Anything above 1.585v.. It will straight jump to 1.73v.. Luckily I not stressing.. If not straight KO..

e2140 @ 4.3Ghz ... beat that

lol..4.3ghz for e2140..use clockgen tarik tarik..den snapshot...den do superpi..haha..den canot tahan ad...i 3.2ghz 24/7 is enuf ad..aiming 8200 if possible...den can hentam abit more.

New E8400 reporting here.
I manage to OC my proc to 4GHz @ 1.38vcore (bios) ..vdrop to 1.34 (cpu-z)
Manage to prime using Orthos (small FFT) more than 10 hrs.

Will try harder on higher speed. Had to wait for my long waited Silverstone PSU (more than 2 months+ RMA    )

Spec as my signature below. All OC done on Acbel 390watt      . Really scary..hahaha

Will post the screen shot once back home

hehehe...u will put pressure on ur psu....monitor the +12v rail...afraid later on kaboom2x...

yup yup...i oso prefer orthos than others...
now my proc still running @3ghz...wanna buy another 2gigs ram for my new setup..    

well, im still learning too man. What you can do, is just test with the super pi 32M. that should be enough. Just 18-20 minutes of your time. if its not stable then up your Vcore(one step at a time)

But first start of with 333Mhz*9, at stock Vcore.. i am not sure about your board bro, what is the Stock Vcore listed? Then increment by 5Mhz in Fsb when u pass your superpi 32m. if you pass, then step up another 5Mhz, then test with super pi 32m. Till it doesnt pass or it say roundup error.. when that happens, up your Vcore to the next step. and do the same repetition..

Wok aloh(learn from sniper69 ), maybe i should write a guide to OC, ill wait till i have elite status first la.

depend lar...mostly only the nb voltage..some time hav to kacau some time not...if kacau pun only 1 step above the default...
hehehe...rarely happen wooo...3.2GHz@stock...if can do...u have a gem...
yup agree...and take times...try n error...make theory of understanding about how OCing work...the pattern maybe...then put our skill into it...

 
i cant go higher with de 1066 strap..
3.2g on stock vcore is bootable...
all stress test are sumtime ok sumtime not...siens diao..

any1 can recomend me nice2 matx board which can help me get pass 370mhx FSB...haiz...

When u reached 3.2Ghz.. You want 3.4Ghz..
When u reached 3.4Ghz.. You want 3.6Ghz..
You will never have enuff of it..

i want to reach 4.0Ghz on my e2140

nice silverfire.. maybe i should play with e2160 also i have a fetish for 3.6Ghz OC X48 with e2160... syok!!!!

@tech
yes they do, but not with e2140

yes very true, in fact i find it great using the E2140 oced to 3.4Ghz... no difference at all in windows, should have been smarter before...

i dont thing so..if E2140@3.4GHz...pair it up with a decent GFX...the lag matter wont be an issued...

yes it does...but just small % of increase...that y i said if it pair with a decent GFX...it should not be an issued....

don't compare 2Mb--->4Mb (2Mb diff)..that one will hav a little gap...in this matter 1Mb(E21X0)--->2Mb(E4X00)... u wont feel the diff...

well, play with the procs and u will see what we mean, iman

how can you ever compare a system that has e6 with 4MB cache with an e2160 with 1Mb cache.. thats not even a comparison unless the e2160 is supercharged to 3.6Ghz or something.

Hey, try play supreme commander with high settings.. LOL

not that easy bro.. 3.0GHz is too low for any comparison with the e6 procs with 4MB... u need at least 3.4Ghz to start with.

if it built with 2Mb...it will be call E4 series...if with 4Mb...it will be call E6 series...so there will be no E2 series... simple as that..

**bro B8B16 sihat??

hihi just bought one E2160 and gigabyte DS3. Was looking for e2140 but that shop din have it T_T

Now finding a graphic card for it T_T