@rozz
your Vcore not enough for 3.4Ghz la.. U must understand that your Vcore depends on speed of proc not on individual component like FSb and Multiplier. If you run at 3.4Ghz u cant unless u go at mid 1.44+V....

Just do what we adviced you and then follow THIS settings!!!!!

400*8 = 3.2Ghz = 1.40v
ddr2 800 5-5-5-15 = 2.0v

hi guy..sory yea wanna ask abit bout e2140..if there oredi answered or explain in this thread im apologies..erm btw jus wonder is there any1 hv try oc e2140 L2?how high can go?if using stock hsf?possible temp to be safe range? :respects: tq guy

Actually 1.9v enough ady to achieve DDR2 800MHz@5-5-5-15 for Hynix FP-Y5... Loosen the timings a bit say 5-6-6-18 can get 1GHz

Mine currently doing 975MHz@5-6-6-15 with just 1.9v, memtest-86 (Test 5) looped 50 times without errors

hmm L2, anyone here ? hmm would be nice to see an L2 come up to 3.48Ghz like the M0 stepping

@mfcm
My E2140 is L2 revision, managed to clock up to 3120MHz@stock voltage. As for the stock HSF, I have no idea.

@dream
not all hynix can do what you are doing..... it depends on the revisions.. of the chip. Some hynix fp-5ys cant even get past 940Mhz

But mine is the lousy batch wor, Revision C if I am not mistaken

revision A,B and C can be Oced to a certain extent i think up to 1000Mhz. That i can say coz have done it. But later ones like D, and E are just crap lol.

hey bro, MSI neo2-fr and BIOSTAR TP35d2-a7 which 1 better ?

some forum said msi neo2-fr can overclock too high

thx dream..now tryin to burn in my fren L2..manage to get 3.0ghz with 1.37v..but temp using this stok hsf

@mfcm
can can. 3.0Ghz is nice at 1.37V Burn in well man.

yeah bro..i leave this oc quite long..so askin u guy for help myb can go higher if using 3rd party hsf myb i can try my M0 later too

me noob also la bro. Just learning how to oc also. so i am here to learn also

Better be careful when buying a M0 now as newer batches don't clock so well as the earlier ones Oh, I think Hynix Revision C is the worst compared to A and B but still can say so so la, I didn't know they already came out with D and E

yes they did and just bought one about 1 month ago lol. it sucks to the max.. lolol. the revision E

????

fuhh.... Juz recovered 4rom a serious crash.... I've tried both of ur ways.... Dis wat happen:

1st, BSOD
2nd, after a few tweaks cannot boot up at all.... lights fans all on, but nothing...
3rd, Put more power on Vcore1.39v n Vdimm2.0v BSOD
4th, Adjust timming 4.4.4.4.15 n 5.5.5.5.15 got a long 5secs beep evry 3 secs....

Now, manage 2 get a small diffrnt 3.20ghz-3.25ghz ....

I think memang my proc cannot take it laa.... Bcuz i jarang c any E2180 user OC over 3.0..... If possible, i dun 1 2 be da 1st to try dis.... Wait until sum1 else reach higher than me.... Thanks evry1 4 helping me out...

Why your timings got so many figures? And Hynix usually can't take 4-4-4-X They do work well with 5-6-6-X though...

@hahaboy
Just to answer your previous question, take Biostar if you don't mind the weird ATX position. And only take MSI IF you like to RMA motherboards However, MSI usually performs quite well from what I read in reviews.

i wan to buy below rm450 m/b, so what is the best choice?