Mayb if u get the DFI mobo like -pws-, u might b able to cold boot it anytime. I'm about to get back my AM2 rig from my GF. Once its back i'll test out the NF-M2 nView. -pws-, powerslide and soulfly, please beware for a flooded PM of questions. hehe, nolar, just kidding, later ask u guys about OC, now, let me try to wrestle my rig back 1st. haha

Google it bro for the software. For me, I only use Orthos and of course it works fine for me.
And for the experience, go to the 1st page of this thread and click on the red number.
There are a lot of records of overclocking there by Lyn-IAN.

Hard works of our Soufly

No problem, if i can online by that time.
Will going to KL work next week. No internet access by that time.


-pWs-

This post has been edited by -pWs-: Jul 2 2007, 01:00 AM

yeah....
not all thing can be "suap" ar....
try google it...
try to OC a bit using ur bios...
try understand ur system....and it sure serve u well...
no one can teach u how to OC ur own system completely...
just can give some tips....

hi jy14, wanna ask you do you have any idea where can i get biostar TF7050 or TF7025?

Not so soon. The last time i heard, either late this week or mid of July. Depends on Kastam's clearance too.

If you're using a 7300GT, you won't notice that much difference in gaming between a Sempron 2.2GHz and a Brisbane or Windsor. Windor is harder to overclock, especially considering the highly overclockable revision (F3) pretty much can't be found in Malaysia. Brisbane is slower than Windsor, but only by about 0.1GHz, meaning a 1.9GHz Brisbane is equal to a 1.8GHZ Windsor. I doubt you'll really notice the difference.

Since I overclock in the BIOS (I OC 25%) for AMD Brisbane 3600.

I set CPU Mhz to 250MHz, HT bus reduce from 5X to 4X. I increase voltage +0.05V

However, does that mean the RAM automatically being OC ? I m using Kingston 1GB 667Mhz Value RAm

My system some times bcome unstable & the computer revert back to 200Mhz. Why ?

I got 1 casing fan & an ONE additional 80mm UVLED fan, should be enough?

I even use this OC (24 hour)l office typing etc, should I just revert back to normal setting & only OC it when I need it??

Yup, your ram will be overclock as well if you use the default divider which is 667MHz for your ram.
Try to lower down your ram divider to 533Mhz.
If u wan to overclock your ram, try to add some vDimm to it.


-pWs-

vDimm = Voltage of the ram.
Btw, what mobo you using now?


-pWs-

This post has been edited by -pWs-: Jul 2 2007, 03:49 PM

finally, change my PSU...
i wonder tat is tat a myth tat ENERMAX FMAII 460W is unuseable on T6100-AM2...
me myself bought it n eventually ended up exchangin it to a Acbel 450W...
everything tat is connected will be switched on except the motherboard...
wonder y...

T6100-am2 paired with enermax/fortron PSU, no go

how bout enermax wif ta690g? =x

hi all....

i bought BIG TYPHOON today,so happy then i start my 1st time OC`

but i seem hardly to enter BIOS,keep hang...how come like this?

im using GA-M57SLI-DS4 rev 2.0 + 3600 Brisbane...

anybody help?

Thanks....

hardly entering BIOS? seems like hardware problem for me

Only hang in BIOS? It might be hardware problem as kalakatu said. But it also might be temperature problem, do u fix ur TTBTVX well???


-pWs-

hardware problem?i need to restart few times n try..but finally can get into bios,what is the problem?

my set up is

(230*9.5)=2185mhz,ram=7xx already vol=1.27

idle=35 Load=45

is it ok?but i prefer higher the clock...

---

Added on July 2, 2007, 9:29 pmtemperature running very well....

really BIG DIFFERENT BTW STOCK FAN!!!

haha, BIG TYPHOON really worthy~~~~

My treasure~~~

This post has been edited by nonoking: Jul 2 2007, 09:29 PM

same problem with me...
at last i also change to acbel ipower 450w...
waste time and money...haiz...

my latest overclock now is 257MHz* 9.5 at stock voltage...
258Mhz above will hang in windows sometimes...and 262Mhz will hang in bios...
cannot go higher even i pump 1.425v vcore, up NB voltage, up vdimm voltage...only blank screen...

This post has been edited by smokey: Jul 2 2007, 11:09 PM