hi guys. for those using ta690g mobo, does anyone know how to disable the shared memory for graphics? coz i want to use all my ram (just 1gb) for my system and dont require it for graphics. thanks in advanced

Sorry if i am wrong.
IMO, once you have plug in the external graphic card, the shared memory for graphics will be disabled automatically.

-pWs-

if i dont have an external gpu? i wan to use onboard but disable the memory sharing/stealing.

If you do not have external graphic card, it is a must for u to share some ram to your onboard graphic card.

-pWs-

if no memory how to display then..

its got its own 256 memory wert. lol. nvm la

so have prob la if oc using graphic on board?? TA690G

can gigabyte 690v mobo use for overclock? installed the easy tune 5 but cannot use the cpu overclock function.

Overclock through BIOS.
Do not expect too high for Gigabyte board.
Remember to press CTRL + F1 combination to enable hidden setting.

-pWs-

isn't the 256MB means it can share 256MB of memory from the ram...

now its 320mb total with 256 from itself. the extra is from my ram.

maybe you could share 32mb only. i did that as i rarely play games, and i need more ram space than higher graphic

do u know where im supposed to change it? thanks

i think u can set it in the intergrated part which sounds like vga memory...

although it got its own memory...it also drag out a little of ur RAM memory for some reason....but not as much like other older on board integrated display...but just a little....

all mobo can use to OC....but it also depends on it capabilities....
using a windows utilities to OC is not recommended...using bios is the best way....

YUP!!!pws is right...Gigabyte can OC...but not promising....if Gigabyte for intel sure rock...gigabyte with AMD....not a good combination...

nope.....now new mobo dont take all that much memory..its got its own chip on the mobo but they just take a little only to make it running....

Here's what I've got:

Abit KN9-SLi
X2 3800+ Windsor 90nm
Hynix DDR2-800

What can I expect on this setup?

I'm used to intel, recently switched to AMD so don't know much about OCing it.

Oh and seems like lots of ppl are using this KN9-SLi, the BIOS options in "Soft Menu" seems lil bit pale? And I can't seem to find the HT freq. option there. Using the latest bios btw.



This post has been edited by V-Zero: Aug 28 2007, 08:26 AM

am i see wrong , pci-e 145mhz , should be lower 101mhz right ?

cpu vcore : 2.1v

This post has been edited by likito: Aug 28 2007, 08:29 AM

lol just playing around with those values while taking shots. All are maximum values

The "Multiplier clock" in that picture refers to the HTT speed right?

Please correct me if I'm wrong.

So where is the HT speed option ?

This post has been edited by V-Zero: Aug 28 2007, 08:32 AM

The multiplier clock on that pic refers to multiplier for clockspeed. HT multiplier should have there....maybe can try to search at chipset configuration??

Found it, in the chipser cfg section. It's default value is "auto" that make me missed it. Nvm.