HT multiplier or CPU multiplier??try to play with both of multiplier. u may get the best setting through various try n error....

u can change cpuMul downward..

if not stable after 250fsb.. could be ur HTT more than 1000
by calculation if u set HTTMul = 4
260x4=1040..
if 250 u can consider 4..
if >250 just set HTTMul=3

u can start increase vdimm..

have u play with your ram timing?
1.425v is quite high to get 2.6GHz IMO

@alive88
like camedemac said, try to loosen a bit ur ram timings. then increase a bit ur Vdimm and try to oc higher..plays with ur HT multiplier. tried between 3 or 4...

i'll try it. but i dont know how to set the ram timing.

Your rig details? List out here so that we are easy to help u

-pWs-

juz want to show.. push slowly..

This post has been edited by xixo_12: Aug 30 2007, 01:51 AM

............................................

This post has been edited by xixo_12: Aug 30 2007, 01:34 AM

.........................................

This post has been edited by xixo_12: Aug 30 2007, 01:33 AM

.........................................................

This post has been edited by xixo_12: Aug 30 2007, 01:33 AM

Reporting in.... ryudox | BIOSTAR TF550 | CORSAIR XMS2 DDR2-675 | stock cooler | 2300MHz

Add me in...

Ryudox, ur proc should be able to oc higher. brisbane can be oc 2.8-3.0 easily.try to change ur HT multiplier to 3 and and change ur ram timings...dont forgot to increase ur Vdimm and Vcore...

here sone news i read....

not sure true or not....just want to share with u all....

http://www.guru3d.com/newsitem.php?id=5818

This post has been edited by sempronic: Aug 29 2007, 11:56 PM

sory too many post.. intenet prob..

---

Added on August 30, 2007, 3:49 amfor ta690g.. how to find bios version??

This post has been edited by xixo_12: Aug 30 2007, 03:49 AM

Er any abit KN9-SLi overclcoker, can provide me the voltage value you use?

found edi n updated ........ hold at 300x9.5 n still push.....1.38v vcore...2.05v vdimmm 4-5-5-15 divider533

This post has been edited by xixo_12: Aug 30 2007, 08:23 AM

this is my rig

athlon x2 4000+ 65nm brisbane,
biostar tf590sli,2X1gb corsair xms2 800,
seagate 160, ggbyte 7900gs turboforce,
ggbyte odin pro 550w..

I cant OC higher since i am using CAPHALANG psu..haha... 2.3ghz is the most stable for my system..maybe i need to upgrade my PSU later with pure power...

it's ok la with capalang PSU, push to 2.5 i think no prob coz oced brisbane only need lower wattage compared to oced windsor....

Nice one. From 2.9GHz above, u will need EXTRA Vcore to achieve.

What is your xms2 spd details? CL4 or CL5?

-pWs-