hi ppl

Finally able to bring my brisbane 3600+ to 3GHz with SuperPI and 10 loops of 3DMark06 stable

My system specs:

DFI Infinity NF UltraII-M2 mobo
AM2 Brisbane 3600+
Dual Channel mode Crucial Value DDR2 667 2x512MB (micron D9 chipset)
Gigabyte 7600GS Silent
CPU Cooler= CM GeminII + 2 mixed brand 120mm fans
Chipset cooler = Thermalright HR-05-SLI + 80mm fan
2x Raptor 37GB 10krpm in RAID mode
Acbel 500W LCD PSU

Casing??? ===> naked, my rig just sit on top of a box for the Abit Fatal1ty AN9 32X


Mod, can help me update my rig in the database?


got another rig for 3GHz mission (abit Fatal1ty AN9 32X, brisby 3600+, 2x1GB Team Value DDR2667)
....sadly quite busy this 2 weeks....will update result later!

This post has been edited by ongbs: Aug 10 2007, 12:36 AM


Attached thumbnail(s)

nice result already

btw, issit bottlenecked by the ram? What's your ram's limit?

Should not be. My ram can reach 1050MHz last time.
Not sure why yet. Still playing with those modded bios

-pWs-

Already "Disable CPU spectrum"

I individually set each of them back to default...

Ok......figured out the prob. This board needs to pump the chipset voltage Never had to do that with my old neo4 platinum. Pushed it til fsb 300 stable

Hmm....but now got another issue. Wen i 1st clocked it to 2.6ghz it would hang after posting(while loading windows) and even hang at post. No matter how much i pump voltage it wud still do dat. However after i reset to lower settings and pump voltage then fsb, it works perfectly. Could be my bios or smth?

This post has been edited by joe_star: Aug 10 2007, 11:29 AM

yea might be...
jz find the bez bios 4 ur mobo then its perfect...

Mind to give us see some screenshots?

-pWs-

This post has been edited by -pWs-: Aug 10 2007, 04:58 PM

Sorry bro all are at home where i got no connection. nextime i will post. basically my settings are smth like this

RAM divider: /10 (DDR400)
fsb: 283
HT link: x3
multi: 9.5
core voltage: 1.26
chipset voltage: 1.275

I didnt touch the memory timings and turned off c n q. Using windows i managed to oc to 2.7ghz and it ran prime for 5 mins but it wont boot with the bios settings for 2.7ghz. Max i could get was 283.

try increasing your vcore.

If 9.5 multiplier max on 283, have a try on 9 multiplier.
Good Luck

-pWs-

hi , i just received my cooler today . so i quick oc my oc . but i having a prob ..

sometime i just test the pi , then the computer auto turn off ( non auto restart ) any idea ?

open pi , speedfan , ai booster , clockGen ,cpu-z only..
>.<

pls give more detail like vcore, vdimm, multiplier etc.

If vcore too low may cause this as well.

FSB : 250 X10 , vcore: 1.4 ,ddr2400 vdmim:1.95(max already)

how come when i set the multiplier to x9, always cannot boot up... Am I destined to use auto?

---

Added on August 11, 2007, 6:58 pmto those using dfi nf570, are you guys able to update the bios to the lastest version? I keep getting bios-string lock error, even though the bios is downloaded frm the product page...

This post has been edited by slash: Aug 11 2007, 06:58 PM

2500hz vcore: 1.5 , 667 cpu/6 417mhz . vdim:1.95(max already)

test around 3 hour prime 95 no prob , when i go to play carbon i feel system unstable . after few minute overall system hang . press restart . game end . T.T

i sure the vcore is more than enought ...

This post has been edited by likito: Aug 11 2007, 07:45 PM

can i knw is there any alternative to cehck stepping rather than checking it on the processor, what i mean is whether there is any software which can do the stepping check

Nope.. You have to see the stepping from the processor

-pWs-

wah, thats tough, how should i take my processor out since the thermal paste is on it, once i remove, i have to apply thermal paste again

Yup..you have to reapply the thermal paste after u rub the previous one.
You should check it before fix the processor

-pWs-

reapplying thermal paste is easy wat. just put in the middle, then slap on the heatsink.