Hi all

I just upgraded my router to Asus RT-AC68U. But after I properly set up all, the new router unable connect to internet, I have called TM and everything is working fine, thus I changed back to my old Asus Router and it still able connect to internet.

Would like to seek for advise, is there any special set up for Asus RT-AC68U?

Thank you

Did you set Unifi Home Mode on IPTV Tab on WAN tab?

I really no idea, I just follow the step to set up the router

I created this guide quite some time ago and it is still applicable for now.

https://www.blacktubi.com/unifi/setup-asus-router-for-unifi/

Thanks bro....i read your another solution in another thread, will try sort it out tonite







THanks bro....will try it out tonite

shifu here, i have roughly 15 tenants are staying 3 apartment units of mine, and I am staying unit 4, i have an unifi 50mbps which will be turbo-ed very soon.. so my question here, if im about to setup a wifi for them, what is the cheapest & best way to do so ? change my current modem to an expensive 1 ? or set up multiple wifi extender ?

P.S : i have a 24hours online pc, any way to setup a wifi for them & not slowing down my speed ?


your help is much appreciated ! thank you rclxm9.gif

Does it make any different? I remember home or business both r using VLAN tagging 500, the only different is home will add another VLAN tagging 600 for IPTV on LAN 4, correct me if I'm wrong, thanks ya

See my reply to you on other thread.

You are right, but he might not have set Unifi Home, or Unifi Business, and did not tag the ports correctly, that’s why I tell him to select either mode.

Your best maintenance free option is to pull wire and connect it to router.

Repeaters are fine but you will have reliability issue and terrible speed for sure. It will be worst considering that you will need multiple repeats to reach the third unit.

So i have white BTU with DIR 850L
Connected Cat5e cable to DIR 850L however highest is 90++ MBPS

Unifi technical tried reset my port however still the same.

Login into admin of the router and check the LAN port as 1000 MBPS

Anything else I should be checking?

tried change cable to cat6. i buy new cable then it straight jump to 700 mbps. what cable you using ? i change both cable from modem to router and router to pc.

BTU might not support turbo speed, or misconfigurd to 100Mbps.

Currently on cat5e cable (as per label on the cable itself).
I am suspecting either the cable is not cat5e or the BTU...

Try another cable, we just got another user got conned with fake CAT6 on another thread.

yea happens to me. mine was cat5e but probably was fake or sth so i buy another one then it works.

keep you all posted tomorrow.
Ordered 3 pieces of Ugreen this morning.

now i change the lan cable to cat 6
only can get 500 plus not 800

Enable NAT Boost in your router and make sure QoS is not enabled.

need some help from experts here regarding router setting...

my setup :

- BTU : Alcatel Lucent I240G
- Router : Dlink DIR-842 (NEW)
- Cable : CAT 6
- On Unifi 500Mbps

i follow the setup wizard in the dlink router to setup my unifi for both 2.4Ghz and 5Ghz...

i use my phone to connect to 5Ghz wifi and speedtest can reach around 200mbps, which is ok for me...then i use my laptop to connect to the 2.4Ghz wifi (my laptop does not support 802.11ac), the speedtest result is disappointing in which the result only give me 25mbps for both download and upload speed...

before this i only use my old router which is the TP Link TL-WR841HP Wireless N router, and my laptop (connect to 2.4Ghz wifi) can get constantly good speed at around 75 to 80mbps for both download and upload speed, upon change to the dlink dir-842, the speed drops a lot and never can exceed 30mbps...

have i done something wrong on the dlink 842 router setting? or i need to do extra setting for the 2.4Ghz wifi?

really appreciate some help here...thx a lot...

Try to do factory reset the router, and then manually do the setup instead of using the setup wizard. Navigate to the WiFi setting page, try to change the frequency number