Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed
221 Pages « < 13 14 15 16 17 > » Bottom

Outline · [ Standard ] · Linear+

 LYN PROTON IRIZ OWNER THREAD V9, Fun, meet feisty.

views
     
WjLye
post Jul 24 2018, 02:24 PM

Getting Started
**
Junior Member
98 posts

Joined: Apr 2009
QUOTE(azyune @ Jul 24 2018, 01:25 PM)
Truly PnP need 6" speaker set. Unfortunately it's unpopular size so rarer to find major brands carry this option. I've seen pioneer to have it but no extensive line ups choice to pick like common 6.5".

Local brand like Mohawk do have one marketed especially for iriz.
But 0.25~0.5" difference is not that much to have to resort to cut a hole... I know as I myself use 6.5", they only use plastic spacer then drill new screws few mm's apart.
*

I don't mind if it need to use spacer or drill new holes for screws since it's covered.
But they're telling me there is a need to cut the door panel to install the speaker. What I'm worried is that the speaker is too thick in size, hence it will need to cut the door trim to allow the speaker to pop out of it.
Anyone know what is the dimension of the original oem speaker on Iriz ?

The speaker I am eyeing is 166mm on the widest, 90mm on the magnet side and 65mm thick.
user posted image
wira_laju
post Jul 24 2018, 03:47 PM

Getting Started
**
Junior Member
235 posts

Joined: Dec 2011
erm..interest 3.8% for used car is ok?..PB.other bank is slowww..
Farlz_89
post Jul 24 2018, 04:12 PM

Enthusiast
*****
Senior Member
919 posts

Joined: Dec 2010
QUOTE(azyune @ Jul 24 2018, 01:25 PM)
Truly PnP need 6" speaker set. Unfortunately it's unpopular size so rarer to find major brands carry this option. I've seen pioneer to have it but no extensive line ups choice to pick like common 6.5".

Local brand like Mohawk do have one marketed especially for iriz.
But 0.25~0.5" difference is not that much to have to resort to cut a hole... I know as I myself use 6.5", they only use plastic spacer then drill new screws few mm's apart.
*
This 1 right Mohawk Iriz ?

Still need to drill if buy those speaker? My current stock speaker sometime will sound high sometime will low again sweat.gif
Will it solve that issue if i install this speaker or need to change Head unit? Mine is 1.6 cvt exec
Ricky300
post Jul 24 2018, 05:34 PM

Regular
******
Senior Member
1,514 posts

Joined: Jan 2003
From: Earth
QUOTE(seale_navy @ Jul 24 2018, 10:31 AM)
Ricky300 - which SC did you sent to? Senaxis in PJ? What about the workmanship? Scratched dashboard?
*
Go to COSE... Kesas highway
seale_navy
post Jul 24 2018, 05:50 PM

Casual
***
Junior Member
387 posts

Joined: Jan 2008
QUOTE(Ricky300 @ Jul 24 2018, 05:34 PM)
Go to COSE... Kesas highway
*
Did COSE managed to resolved the issue for you?
Ricky300
post Jul 24 2018, 07:18 PM

Regular
******
Senior Member
1,514 posts

Joined: Jan 2003
From: Earth
QUOTE(seale_navy @ Jul 24 2018, 05:50 PM)
Did COSE managed to resolved the issue for you?
*
can't settle fully...but way better than before
WjLye
post Jul 24 2018, 11:37 PM

Getting Started
**
Junior Member
98 posts

Joined: Apr 2009
QUOTE(azyune @ Jul 24 2018, 01:25 PM)
Truly PnP need 6" speaker set. Unfortunately it's unpopular size so rarer to find major brands carry this option. I've seen pioneer to have it but no extensive line ups choice to pick like common 6.5".

Local brand like Mohawk do have one marketed especially for iriz.
But 0.25~0.5" difference is not that much to have to resort to cut a hole... I know as I myself use 6.5", they only use plastic spacer then drill new screws few mm's apart.
*
Hi, do you by any chance are aware what is the thickness of your 6.5" speaker ?

QUOTE(Farlz_89 @ Jul 24 2018, 04:12 PM)
This 1 right Mohawk Iriz ?

Still need to drill if buy those speaker? My current stock speaker sometime will sound high sometime will low again  sweat.gif
Will it solve that issue if i install this speaker or need to change Head unit? Mine is 1.6 cvt exec
*
Bro, I think this seems like a HU issue rather than the speaker issue. Seems like the HU output is unstable ? The loud and soft only appear when using FM ? Or when using CD/Bluetooth also ?

But don't quote me, just guessing.
khairilyazit
post Jul 25 2018, 08:14 AM

Casual
***
Junior Member
406 posts

Joined: Sep 2010
From: Papar, Sabah
QUOTE(Farlz_89 @ Jul 24 2018, 04:12 PM)
This 1 right Mohawk Iriz ?

Still need to drill if buy those speaker? My current stock speaker sometime will sound high sometime will low again  sweat.gif
Will it solve that issue if i install this speaker or need to change Head unit? Mine is 1.6 cvt exec
*
That HU.. thats the problem.. have u tried using aux input? Day and night difference...
Farlz_89
post Jul 25 2018, 10:28 AM

Enthusiast
*****
Senior Member
919 posts

Joined: Dec 2010
QUOTE(khairilyazit @ Jul 25 2018, 08:14 AM)
That HU.. thats the problem.. have u tried using aux input? Day and night difference...
*
Already try aux input and the sound is ok.
At FM also ok.
But when i play usb video, at the bass part sometime the sound will go slow..sometime ok.
Already try play using others vid and format..sometime ok sometime not
Maybe i need to setting again my eq? sweat.gif
Anyone here already change their stock speaker? really got different compare with stock speaker?
I plan to change speaker only without add amp, woofer and change HU.
TSyadea
post Jul 25 2018, 12:32 PM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010
QUOTE(Farlz_89 @ Jul 25 2018, 10:28 AM)
Already try aux input and the sound is ok.
At FM also ok.
But when i play usb video, at the bass part sometime the sound will go slow..sometime ok.
Already try play using others vid and format..sometime ok sometime not
Maybe i need to setting again my eq?  sweat.gif
Anyone here already change their stock speaker? really got different compare with stock speaker?
I plan to change speaker only without add amp, woofer and change HU.
*
Add woofer then bassier icon_idea.gif
azyune
post Jul 29 2018, 05:30 PM

Casual
***
Junior Member
321 posts

Joined: May 2012
QUOTE(WjLye @ Jul 24 2018, 02:24 PM)
I don't mind if it need to use spacer or drill new holes for screws since it's covered.
But they're telling me there is a need to cut the door panel to install the speaker. What I'm worried is that the speaker is too thick in size, hence it will need to cut the door trim to allow the speaker to pop out of it.
Anyone know what is the dimension of the original oem speaker on Iriz ?

The speaker I am eyeing is 166mm on the widest, 90mm on the magnet side and 65mm thick.
user posted image
*
QUOTE(WjLye @ Jul 24 2018, 11:37 PM)
Hi, do you by any chance are aware what is the thickness of your 6.5" speaker ?

*
Oh I did not check the dimension (sorry can't help with that) but my 6.5" is average entry level set, not some SPL-grade with obvious oversized magnets. The installer have no problem with fitting it, only need spacer to bring the unit a bit forward for magnet clearance. No cutting anything done as I observed the whole process.

Front: 6.5", Rear stock 6" ....Not much difference isn't it?
» Click to show Spoiler - click again to hide... «


QUOTE(Farlz_89 @ Jul 24 2018, 04:12 PM)
This 1 right Mohawk Iriz ?

Still need to drill if buy those speaker? My current stock speaker sometime will sound high sometime will low again  sweat.gif
Will it solve that issue if i install this speaker or need to change Head unit? Mine is 1.6 cvt exec
*
This not so sure where they actually made it with 6" or 6.5" with adapter accessories included then simply slap it with car model sticker in hoping the installer know what to do sweat.gif Try to confirm with the seller first or do some research from user reviews.
azyune
post Jul 29 2018, 05:32 PM

Casual
***
Junior Member
321 posts

Joined: May 2012
QUOTE(yadea @ Jul 25 2018, 12:32 PM)
Add woofer then bassier  icon_idea.gif
*
You don't simply hear the music, you need to feel it too brows.gif
WjLye
post Jul 31 2018, 12:56 AM

Getting Started
**
Junior Member
98 posts

Joined: Apr 2009
QUOTE(azyune @ Jul 29 2018, 05:30 PM)
Oh I did not check the dimension (sorry can't help with that) but my 6.5" is average entry level set, not some SPL-grade with obvious oversized magnets. The installer have no problem with fitting it, only need spacer to bring the unit a bit forward for magnet clearance. No cutting anything done as I observed the whole process.

Front: 6.5", Rear stock 6" ....Not much difference isn't it?
» Click to show Spoiler - click again to hide... «

This not so sure where they actually made it with 6" or 6.5" with adapter accessories included then simply slap it with car model sticker in hoping the installer know what to do  sweat.gif Try to confirm with the seller first or do some research from user reviews.
*
Thanks. Very informative photo.
So you swapped the front stock 6" to the back and installed new 6.5" at the front ?
Is it a Iriz Standard ? If so, need to lay additional wiring to be back ?
All your speaker powered from HU or with amp ?


This post has been edited by WjLye: Jul 31 2018, 12:56 AM
azyune
post Jul 31 2018, 12:37 PM

Casual
***
Junior Member
321 posts

Joined: May 2012
QUOTE(WjLye @ Jul 31 2018, 12:56 AM)
Thanks. Very informative photo.
So you swapped the front stock 6" to the back and installed new 6.5" at the front ?
Is it a Iriz Standard ? If so, need to lay additional wiring to be back ?
All your speaker powered from HU or with amp ?
*
Yes, my is Std variant with no rear speakers so that was I did as in photos.

Wiring harness for rear speakers end at B-pillar, can see in photo the cover is removed to access for it. Yes, need additional wires from the pillar to the door. As it is a stock unit only so no need fancy cables. normal speaker wires is enough, easy job for the installer.

Front comp speakers powered by 4ch power amp under the passenger seat (also driving the sub in the boot), while rear speakers as it using original wiring, powered directly by HU. Btw, HU also aftermarket android unit so no more weak sound from usb input like in stock unit. biggrin.gif

This post has been edited by azyune: Jul 31 2018, 12:42 PM
hawk1lo
post Aug 3 2018, 12:56 PM

New Member
*
Junior Member
33 posts

Joined: Feb 2010
QUOTE(azyune @ Jul 31 2018, 01:37 PM)
Yes, my is Std variant with no rear speakers so that was I did as in photos.

Wiring harness for rear speakers end at B-pillar, can see in photo the cover is removed to access for it. Yes, need additional wires from the pillar to the door. As it is a stock unit only so no need fancy cables. normal speaker wires is enough, easy job for the installer.

Front comp speakers powered by 4ch power amp under the passenger seat (also driving the sub in the boot), while rear speakers as it using original wiring, powered directly by HU. Btw, HU also aftermarket android unit so no more weak sound from usb input like in stock unit.  biggrin.gif
*
u mean standard variant HU (with no screen) USB input weak sound? wat do you mean by that?

I am having a standard variant and i m thinking of adding another 2 rear speakers
WiLeKiyO
post Aug 4 2018, 01:49 AM

Look at all my stars!!
*******
Senior Member
5,144 posts

Joined: Oct 2009
QUOTE(Farlz_89 @ Jul 25 2018, 10:28 AM)
Already try aux input and the sound is ok.
At FM also ok.
But when i play usb video, at the bass part sometime the sound will go slow..sometime ok.
Already try play using others vid and format..sometime ok sometime not
Maybe i need to setting again my eq?  sweat.gif
Anyone here already change their stock speaker? really got different compare with stock speaker?
I plan to change speaker only without add amp, woofer and change HU.
*
Exactly the same problem as mine.

It sucks to play music via USB.

I just choose to live with it.
Musikl
post Aug 4 2018, 04:56 PM

Getting Started
**
Junior Member
265 posts

Joined: Sep 2014
QUOTE(yadea @ May 6 2018, 04:33 PM)
16. Car color touch up

» Click to show Spoiler - click again to hide... «

May i know the color touch up code plsss
Looking for moondust...
Ill check the threads for it while waiting for answers.

Update:
Nvm found it on iriz group. A0209

This post has been edited by Musikl: Aug 4 2018, 05:20 PM
chikuera
post Aug 4 2018, 11:11 PM

Nora Bagi 4 Stars!!
*****
Senior Member
749 posts

Joined: Aug 2011
it's frustrating that I have tried searching for Iriz tail lamp that has different graphic but to no avail..

and to think even Avanza got that, I am baffled..

Why these OEM wont make one for Iriz??
TSyadea
post Aug 4 2018, 11:55 PM

Getting Started
**
Junior Member
127 posts

Joined: Aug 2010
QUOTE(Musikl @ Aug 4 2018, 04:56 PM)
May i know the color touch up code plsss
Looking for moondust...
Ill check the threads for it while waiting for answers.

Update:
Nvm found it on iriz group. A0209
*
Can be found in few locations. I only remember the one under the bonnet.
azyune
post Aug 5 2018, 12:48 AM

Casual
***
Junior Member
321 posts

Joined: May 2012
QUOTE(chikuera @ Aug 4 2018, 11:11 PM)
it's frustrating that I have tried searching for Iriz tail lamp that has different graphic but to no avail..

and to think even Avanza got that, I am baffled..

Why these OEM wont make one for Iriz??
*
what do you mean by different graphic? confused.gif
« Next Oldest · Car Clubs · Next Newest »
 

221 Pages « < 13 14 15 16 17 > » Top
Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0222sec    0.34    6 queries    GZIP Disabled
Time is now: 6th December 2025 - 11:52 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.