Is anyone can help? I need urgent help pls!

Bro, if you want to use the C1200 as a print server and disk storage, I would recommend you getting another router as the C1200 only supports USB2.0. If that doesn’t matter, I suggest you get the TP-Link C7 v4 as it has two USB2.0 port rather than only one.

i dont have extra money to another new router.

Can i just buy 1 USB Hub to extend few more USB ports?

It might not work as the extra USB ports will need more voltage than the router can provide and the CPU of the router might not be strong enough as well, ergo it won’t work, but you can try.

But, the USB port on the C1200 is only 2.0, so attaching a USB3.0 to the port wont make it 3.0, only 2.0, so your disk transfer will be slow.

I don't care slow speed transfer, as long as can extend USB ports.

No worry, my this USB Port has extra power plug (DC 5V) for more juices...

You can try then, and hope that the CPU of the router can take it. Good luck.

Looks like you've made up your mind. Try it out then.. If it works..Great! Do return to let us know how it goes..

have you check your printer is supported or not, if not supported, then can not.

My printer is supported.

Now I need 1 more Usb port for Disk Storage.

Should be no problem with external power but really depends on TPLink's firmware. On my Mikrotik router, I use a powered USB hub to connect a USB GPS, thumbdrive and a 3G USB modem. No printer as the Mikrotik doesn't support that.

for this router where can i get the system up time status ??

It’s not displayed either in the webgui or the app. Possibly out of embarrassment.

Never expose your disadvantage

This post has been edited by coolguy_0925: Mar 25 2018, 01:10 PM

Archer C7 V4 where to see up time, can not find it.

Possibly don’t have also. Seems like display of system uptime was left out of newer firmwares. If your TPLink has SNMP, I believe you can still get it from there. C1200 dun have SNMP, C9 got, C7 no idea.

This post has been edited by soonwai: Mar 25 2018, 01:34 PM

tqvm bro for the info

Just fixed unifi 30 and Tplink C1200 was provided. May i know if there is a function to schedule on/off the wireless?

Update for C1200 auto reboot / WAN IP keep changing issue

so TM has provided some setting tweaking to stabilise the condition.

1. disable ipv6
2. disable NAT Boost
3. set to auto DNS (get DNS from ISP)
4. MTU Size : 1492

So far the router uptime has been over 10 Days to date. Same goes with the WAN IP, it doesn't change itself.

UPDATE:
The router still having the same issue after changing these setting.
Firmware Version : 1.0.0. Build 20180208 rel.57928 (EU)

Thank you.

This post has been edited by zkteh: Apr 1 2018, 03:21 PM

Unfortunately no. The closest thing to achieving that would be to use parental controls.

Lol, just change the router for the best results.