Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed
68 Pages « < 19 20 21 22 23 > » Bottom

Outline · [ Standard ] · Linear+

 Official TP-Link C1200 V1(EU) Firmware is out, Hidden WDS functionality works!, Page 29

views
     
zkteh
post Apr 3 2018, 05:36 PM

Getting Started
**
Junior Member
160 posts

Joined: May 2015
QUOTE(ikengkai @ Apr 3 2018, 10:37 AM)
I look at the system log. What the keyword to know the router disconnect? I did faced this problem after 3-4 days of usage, with latest 2018-02-08 EU V1 firmware.

few example: 

network[2034]: <5> 290250 Restart interfaces
....
To identify whether the router has rebooted itself, scroll to the end page (save log to txt for better spotting) then compare the date and time of the last log amd static log.
Difference between them is that the static log will remain there even after the router has been restarted.

For example, 2018-03-27 is the last log and 2018-02-08 onwards is the static log.
I know the router has rebooted itself because 2018-03-27 is the same day I checked the log, and it has a big gap between the last log and static log. If the router has been running up to 3 days, the last log will be 2018-03-25.


Please do this everyday cause the old data will be overwritten once it's "full" (I am not sure tplink will store for how many logs)

CODE

2018-03-27 18:48:46 led-controller[728]: <7> 288001 Receive data length = 132
2018-03-27 18:48:46 led-controller[728]: <3> 288753 Config importing failed
2018-03-27 18:48:46 led-controller[728]: <7> 288009 Failed to read LAN_ON
2018-03-27 18:48:46 led-controller[728]: <7> 288003 Led rule name is LAN_ON
2018-03-27 18:48:46 led-controller[728]: <7> 288001 Receive data length = 132
2018-02-08 00:01:14 nat[10164]: <7> 211001 Flush conntrack
2018-02-08 00:01:14 nat[10164]: <6> 211021 IPSEC ALG enabled
2018-02-08 00:01:14 nat[10164]: <6> 211021 L2TP ALG enabled
2018-02-08 00:01:14 nat[10164]: <6> 211021 PPTP ALG enabled
2018-02-08 00:01:14 nat[10164]: <6> 211021 SIP ALG enabled
2018-02-08 00:01:14 nat[10164]: <6> 211021 RTSP ALG enabled


To identify whether the WAN IP has changed itself.
1. Look for NAT in the logs (please ignore the 1st NAT logs as it is required to get a IP after reboot)
2. using online website to trace the IP, or use the google search built in function, type in : myip

From here, I know around 2018-03-31 16:05, then WAN IP has changed itself


CODE

2018-03-31 16:43:56 locale[12846]: <7> 283002 Explorer language is 'en_US'
2018-03-31 16:43:49 locale[12756]: <6> 283051 Language is changed to 'en_US'
2018-03-31 16:43:49 locale[12756]: <7> 283002 Explorer language is 'en_US'
2018-03-31 16:06:00 nat[18608]: <7> 211001 Flush conntrack
2018-03-31 16:06:00 nat[18608]: <6> 211021 IPSEC ALG enabled
2018-03-31 16:06:00 nat[18608]: <6> 211021 L2TP ALG enabled
2018-03-31 16:06:00 nat[18608]: <6> 211021 PPTP ALG enabled
2018-03-31 16:06:00 nat[18608]: <6> 211021 SIP ALG enabled
2018-03-31 16:06:00 nat[18608]: <6> 211021 RTSP ALG enabled
2018-03-31 16:06:00 nat[18608]: <6> 211021 H323 ALG enabled
2018-03-31 16:06:00 nat[18608]: <6> 211021 TFTP ALG enabled
2018-03-31 16:06:00 nat[18608]: <6> 211021 FTP ALG enabled
2018-03-31 16:05:56 qos[19111]: <6> 259504 Service start
2018-03-31 16:05:56 qos[19111]: <6> 259503 Function disabled
2018-03-31 16:05:56 qos[19111]: <6> 259505 Service stop
2018-03-31 16:05:51 nat[18608]: <6> 211501 Initialization succeeded
2018-03-31 16:05:49 nat[18608]: <6> 211501 Initialization succeeded
2018-03-31 16:05:44 qos[18512]: <6> 259504 Service start
2018-03-31 16:05:44 qos[18512]: <6> 259503 Function disabled
2018-03-31 16:05:44 qos[18512]: <6> 259505 Service stop
2018-03-31 16:05:44 nat[17771]: <7> 211001 Flush conntrack
2018-03-31 16:05:44 nat[17771]: <6> 211021 IPSEC ALG enabled
2018-03-31 16:05:44 nat[17771]: <6> 211021 L2TP ALG enabled
2018-03-31 16:05:44 nat[17771]: <6> 211021 PPTP ALG enabled
2018-03-31 16:05:44 nat[17771]: <6> 211021 SIP ALG enabled
2018-03-31 16:05:44 nat[17771]: <6> 211021 RTSP ALG enabled
2018-03-31 16:05:43 nat[17771]: <6> 211021 H323 ALG enabled
2018-03-31 16:05:43 nat[17771]: <6> 211021 TFTP ALG enabled
2018-03-31 16:05:43 nat[17771]: <6> 211021 FTP ALG enabled
2018-03-31 16:05:37 nat[17771]: <6> 211501 Initialization succeeded
2018-03-31 16:05:35 nat[17771]: <6> 211501 Initialization succeeded
2018-03-31 11:49:54 led-controller[728]: <6> 288051 Start to run LAN1_ON
2018-03-31 11:49:54 led-controller[728]: <7> 288004 LAN1_ON is found
2018-03-31 11:49:54 led-controller[728]: <7> 288003 Led rule name is LAN1_ON


Hope this helps. TQ.

This post has been edited by zkteh: Apr 3 2018, 05:41 PM
ikengkai
post Apr 3 2018, 08:50 PM

Getting Started
**
Junior Member
263 posts

Joined: Oct 2007
QUOTE(zkteh @ Apr 3 2018, 05:36 PM)
To identify whether the router has rebooted itself, scroll to the end page (save log to txt for better spotting) then compare the date and time of the last log amd static log.
Thank bro!
I did capture the IP through the Advanced -> Status page.
Okay, will continue to monitor the reboot issue. I setup to send log to my email every 24 hours....
Alex9182
post Apr 3 2018, 09:09 PM

On my way
****
Senior Member
669 posts

Joined: Sep 2015
Ooh, Tp-Link Archer C1200 sold outside is V3, not V1 that is why no self reboot issue.


Attached thumbnail(s)
Attached Image
zhuoyang
post Apr 4 2018, 09:05 AM

Getting Started
**
Junior Member
197 posts

Joined: Jul 2011
what's the current best firmware for unifi tp-link ac1200 ? Recently my archer c5 broke and tm changed it to ac1200 doh.gif doh.gif
ikengkai
post Apr 6 2018, 01:58 PM

Getting Started
**
Junior Member
263 posts

Joined: Oct 2007
QUOTE(zkteh @ Apr 3 2018, 05:36 PM)


Disable NAT Boost, configure per your setting. Still see internet led go orange/red at night time, happen 2-4 times per night... Checked the logs, a lot of led thing only...
Tp-link can't fix the led controller problem?????


CODE

2018-04-05 22:51:18 led-controller[720]: <7> 288004 WAN1_OFF is found
2018-04-05 22:51:18 led-controller[720]: <7> 288003 Led rule name is WAN1_OFF
2018-04-05 22:51:18 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 22:51:18 led-controller[720]: <6> 288051 Start to run WAN0_ON
2018-04-05 22:51:18 led-controller[720]: <7> 288004 WAN0_ON is found
2018-04-05 22:51:18 led-controller[720]: <7> 288003 Led rule name is WAN0_ON
2018-04-05 22:51:18 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 22:51:18 led-controller[720]: <3> 288753 Config importing failed
2018-04-05 22:51:18 led-controller[720]: <7> 288009 Failed to read LAN_OFF
2018-04-05 22:51:18 led-controller[720]: <7> 288003 Led rule name is LAN_OFF
2018-04-05 22:51:18 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 22:01:15 led-controller[720]: <6> 288051 Start to run WAN1_ON
2018-04-05 22:01:15 led-controller[720]: <7> 288004 WAN1_ON is found
2018-04-05 22:01:15 led-controller[720]: <7> 288003 Led rule name is WAN1_ON
2018-04-05 22:01:15 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 22:01:15 led-controller[720]: <6> 288051 Start to run WAN0_OFF
2018-04-05 22:01:15 led-controller[720]: <7> 288004 WAN0_OFF is found
2018-04-05 22:01:15 led-controller[720]: <7> 288003 Led rule name is WAN0_OFF
2018-04-05 22:01:15 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 22:01:14 led-controller[720]: <3> 288753 Config importing failed
2018-04-05 22:01:14 led-controller[720]: <7> 288009 Failed to read LAN_OFF
2018-04-05 22:01:14 led-controller[720]: <7> 288003 Led rule name is LAN_OFF
2018-04-05 22:01:14 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 22:00:57 led-controller[720]: <6> 288051 Start to run WAN1_OFF
2018-04-05 22:00:57 led-controller[720]: <7> 288004 WAN1_OFF is found
2018-04-05 22:00:57 led-controller[720]: <7> 288003 Led rule name is WAN1_OFF
2018-04-05 22:00:57 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 22:00:57 led-controller[720]: <6> 288051 Start to run WAN0_ON
2018-04-05 22:00:57 led-controller[720]: <7> 288004 WAN0_ON is found
2018-04-05 22:00:57 led-controller[720]: <7> 288003 Led rule name is WAN0_ON
2018-04-05 22:00:57 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 22:00:57 led-controller[720]: <3> 288753 Config importing failed
2018-04-05 22:00:57 led-controller[720]: <7> 288009 Failed to read LAN_OFF
2018-04-05 22:00:57 led-controller[720]: <7> 288003 Led rule name is LAN_OFF
2018-04-05 22:00:57 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:56:43 led-controller[720]: <6> 288051 Start to run WAN1_ON
2018-04-05 21:56:43 led-controller[720]: <7> 288004 WAN1_ON is found
2018-04-05 21:56:43 led-controller[720]: <7> 288003 Led rule name is WAN1_ON
2018-04-05 21:56:43 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:56:43 led-controller[720]: <6> 288051 Start to run WAN0_OFF
2018-04-05 21:56:43 led-controller[720]: <7> 288004 WAN0_OFF is found
2018-04-05 21:56:43 led-controller[720]: <7> 288003 Led rule name is WAN0_OFF
2018-04-05 21:56:43 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:56:42 led-controller[720]: <3> 288753 Config importing failed
2018-04-05 21:56:42 led-controller[720]: <7> 288009 Failed to read LAN_OFF
2018-04-05 21:56:42 led-controller[720]: <7> 288003 Led rule name is LAN_OFF
2018-04-05 21:56:42 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:56:05 led-controller[720]: <6> 288051 Start to run WAN1_OFF
2018-04-05 21:56:05 led-controller[720]: <7> 288004 WAN1_OFF is found
2018-04-05 21:56:05 led-controller[720]: <7> 288003 Led rule name is WAN1_OFF
2018-04-05 21:56:05 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:56:05 led-controller[720]: <6> 288051 Start to run WAN0_ON
2018-04-05 21:56:05 led-controller[720]: <7> 288004 WAN0_ON is found
2018-04-05 21:56:05 led-controller[720]: <7> 288003 Led rule name is WAN0_ON
2018-04-05 21:56:05 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:56:05 led-controller[720]: <3> 288753 Config importing failed
2018-04-05 21:56:05 led-controller[720]: <7> 288009 Failed to read LAN_OFF
2018-04-05 21:56:05 led-controller[720]: <7> 288003 Led rule name is LAN_OFF
2018-04-05 21:56:05 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:54:54 led-controller[720]: <6> 288051 Start to run WAN1_ON
2018-04-05 21:54:54 led-controller[720]: <7> 288004 WAN1_ON is found
2018-04-05 21:54:54 led-controller[720]: <7> 288003 Led rule name is WAN1_ON
2018-04-05 21:54:54 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:54:54 led-controller[720]: <6> 288051 Start to run WAN0_OFF
2018-04-05 21:54:54 led-controller[720]: <7> 288004 WAN0_OFF is found
2018-04-05 21:54:54 led-controller[720]: <7> 288003 Led rule name is WAN0_OFF
2018-04-05 21:54:54 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:54:54 led-controller[720]: <3> 288753 Config importing failed
2018-04-05 21:54:54 led-controller[720]: <7> 288009 Failed to read LAN_OFF
2018-04-05 21:54:54 led-controller[720]: <7> 288003 Led rule name is LAN_OFF
2018-04-05 21:54:54 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:54:37 led-controller[720]: <6> 288051 Start to run WAN1_OFF
2018-04-05 21:54:37 led-controller[720]: <7> 288004 WAN1_OFF is found
2018-04-05 21:54:37 led-controller[720]: <7> 288003 Led rule name is WAN1_OFF
2018-04-05 21:54:37 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:54:37 led-controller[720]: <6> 288051 Start to run WAN0_ON
2018-04-05 21:54:37 led-controller[720]: <7> 288004 WAN0_ON is found
2018-04-05 21:54:37 led-controller[720]: <7> 288003 Led rule name is WAN0_ON
2018-04-05 21:54:37 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:54:37 led-controller[720]: <3> 288753 Config importing failed
2018-04-05 21:54:37 led-controller[720]: <7> 288009 Failed to read LAN_OFF
2018-04-05 21:54:37 led-controller[720]: <7> 288003 Led rule name is LAN_OFF
2018-04-05 21:54:37 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:35:18 led-controller[720]: <6> 288051 Start to run WAN1_ON
2018-04-05 21:35:18 led-controller[720]: <7> 288004 WAN1_ON is found
2018-04-05 21:35:18 led-controller[720]: <7> 288003 Led rule name is WAN1_ON
2018-04-05 21:35:18 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:35:18 led-controller[720]: <6> 288051 Start to run WAN0_OFF
2018-04-05 21:35:18 led-controller[720]: <7> 288004 WAN0_OFF is found
2018-04-05 21:35:18 led-controller[720]: <7> 288003 Led rule name is WAN0_OFF
2018-04-05 21:35:18 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:35:18 led-controller[720]: <3> 288753 Config importing failed
2018-04-05 21:35:18 led-controller[720]: <7> 288009 Failed to read LAN_OFF
2018-04-05 21:35:18 led-controller[720]: <7> 288003 Led rule name is LAN_OFF
2018-04-05 21:35:18 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:35:01 led-controller[720]: <6> 288051 Start to run WAN1_OFF
2018-04-05 21:35:01 led-controller[720]: <7> 288004 WAN1_OFF is found
2018-04-05 21:35:01 led-controller[720]: <7> 288003 Led rule name is WAN1_OFF
2018-04-05 21:35:01 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:35:01 led-controller[720]: <6> 288051 Start to run WAN0_ON
2018-04-05 21:35:01 led-controller[720]: <7> 288004 WAN0_ON is found
2018-04-05 21:35:01 led-controller[720]: <7> 288003 Led rule name is WAN0_ON
2018-04-05 21:35:01 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:35:01 led-controller[720]: <3> 288753 Config importing failed
2018-04-05 21:35:01 led-controller[720]: <7> 288009 Failed to read LAN_OFF
2018-04-05 21:35:01 led-controller[720]: <7> 288003 Led rule name is LAN_OFF
2018-04-05 21:35:01 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:22:06 led-controller[720]: <6> 288051 Start to run WAN1_ON
2018-04-05 21:22:06 led-controller[720]: <7> 288004 WAN1_ON is found
2018-04-05 21:22:06 led-controller[720]: <7> 288003 Led rule name is WAN1_ON
2018-04-05 21:22:06 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:22:06 led-controller[720]: <6> 288051 Start to run WAN0_OFF
2018-04-05 21:22:06 led-controller[720]: <7> 288004 WAN0_OFF is found
2018-04-05 21:22:06 led-controller[720]: <7> 288003 Led rule name is WAN0_OFF
2018-04-05 21:22:06 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:22:06 led-controller[720]: <3> 288753 Config importing failed
2018-04-05 21:22:06 led-controller[720]: <7> 288009 Failed to read LAN_OFF
2018-04-05 21:22:06 led-controller[720]: <7> 288003 Led rule name is LAN_OFF
2018-04-05 21:22:06 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:21:29 led-controller[720]: <6> 288051 Start to run WAN1_OFF
2018-04-05 21:21:29 led-controller[720]: <7> 288004 WAN1_OFF is found
2018-04-05 21:21:29 led-controller[720]: <7> 288003 Led rule name is WAN1_OFF
2018-04-05 21:21:29 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:21:29 led-controller[720]: <6> 288051 Start to run WAN0_ON
2018-04-05 21:21:29 led-controller[720]: <7> 288004 WAN0_ON is found
2018-04-05 21:21:29 led-controller[720]: <7> 288003 Led rule name is WAN0_ON
2018-04-05 21:21:29 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:21:29 led-controller[720]: <3> 288753 Config importing failed
2018-04-05 21:21:29 led-controller[720]: <7> 288009 Failed to read LAN_OFF
2018-04-05 21:21:29 led-controller[720]: <7> 288003 Led rule name is LAN_OFF
2018-04-05 21:21:29 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:06:57 led-controller[720]: <6> 288051 Start to run WAN1_ON
2018-04-05 21:06:57 led-controller[720]: <7> 288004 WAN1_ON is found
2018-04-05 21:06:57 led-controller[720]: <7> 288003 Led rule name is WAN1_ON
2018-04-05 21:06:57 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:06:57 led-controller[720]: <6> 288051 Start to run WAN0_OFF
2018-04-05 21:06:57 led-controller[720]: <7> 288004 WAN0_OFF is found
2018-04-05 21:06:57 led-controller[720]: <7> 288003 Led rule name is WAN0_OFF
2018-04-05 21:06:57 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:06:57 led-controller[720]: <3> 288753 Config importing failed
2018-04-05 21:06:57 led-controller[720]: <7> 288009 Failed to read LAN_OFF
2018-04-05 21:06:57 led-controller[720]: <7> 288003 Led rule name is LAN_OFF
2018-04-05 21:06:57 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:06:20 led-controller[720]: <6> 288051 Start to run WAN1_OFF
2018-04-05 21:06:20 led-controller[720]: <7> 288004 WAN1_OFF is found
2018-04-05 21:06:20 led-controller[720]: <7> 288003 Led rule name is WAN1_OFF
2018-04-05 21:06:20 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:06:20 led-controller[720]: <6> 288051 Start to run WAN0_ON
2018-04-05 21:06:20 led-controller[720]: <7> 288004 WAN0_ON is found
2018-04-05 21:06:20 led-controller[720]: <7> 288003 Led rule name is WAN0_ON
2018-04-05 21:06:20 led-controller[720]: <7> 288001 Receive data length = 132
2018-04-05 21:06:20 led-controller[720]: <3> 288753 Config importing failed
2018-04-05 21:06:20 led-controller[720]: <7> 288009 Failed to read LAN_OFF
SilentVampire
post Apr 6 2018, 02:08 PM

Networking Enthusiast
*******
Senior Member
5,714 posts

Joined: Mar 2007
QUOTE(Alex9182 @ Apr 3 2018, 09:09 PM)
Ooh, Tp-Link Archer C1200 sold outside is V3, not V1 that is why no self reboot issue.
*
Yes, the TP-Link sold by vendors are V3, not V1. TM are the only ones that keep issuing V1 although there are many issues already.

QUOTE(ikengkai @ Apr 6 2018, 01:58 PM)
QUOTE(zkteh @ Apr 3 2018, 05:36 PM)


Disable NAT Boost, configure per your setting. Still see internet led go orange/red at night time, happen 2-4 times per night... Checked the logs, a lot of led thing only...
Tp-link can't fix the led controller problem?????
Just get your own router and change it to the TP-Link C7 v4, or the Asus RT-AC1300UHP.
voncrane
post Apr 6 2018, 03:59 PM

Noir et fier!
*******
Senior Member
7,120 posts

Joined: Oct 2011
From: Wakanda
QUOTE(SilentVampire @ Apr 6 2018, 02:08 PM)
Yes, the TP-Link sold by vendors are V3, not V1. TM are the only ones that keep issuing V1 although there are many issues already.
Disable NAT Boost, configure per your setting. Still see internet led go orange/red at night time, happen 2-4 times per night... Checked the logs, a lot of led thing only...
Tp-link can't fix the led controller problem?????

Just get your own router and change it to the TP-Link C7 v4, or the Asus RT-AC1300UHP.
*
TM has to clear stock mah.. Must have bought in bulk to be cheaper and I have to say mine works for me.. Not so much for others.

This post has been edited by voncrane: Apr 6 2018, 04:00 PM
ikengkai
post Apr 7 2018, 05:45 PM

Getting Started
**
Junior Member
263 posts

Joined: Oct 2007
Now testing disable some of the setting per advice below....

Special note on turning on the UniFi IPTV setting:
Do not access the router administration web interface by connecting your PC to LAN Port #1 of the router, you should connect your HyppTV STB to that port instead. If you connect your PC to that port, you will end up unable to access the administration web interface after you click on the Save button, because that port will be assigned to a separate VLAN.
There is an option for IGMP Version 2 and Version 3. If you choose IGMP V3, your Internet link will be down. Your Internet link can only work properly with IGMP V2.
Certain function of the router, such as QoS, will need to be disabled once you enable the IPTV setting. Probably because they are not compatible with each other.
ikengkai
post Apr 7 2018, 05:47 PM

Getting Started
**
Junior Member
263 posts

Joined: Oct 2007
QUOTE(SilentVampire @ Apr 6 2018, 02:08 PM)

Just get your own router and change it to the TP-Link C7 v4, or the Asus RT-AC1300UHP.
*
Not cheap for a good router.... so, try to see can "rescue"...
hurricane21
post Apr 7 2018, 07:26 PM

Senior Probation
******
Senior Member
1,389 posts

Joined: Feb 2006
From: Southern Region
Is the latest official TM firmware still have @unifi on WiFi ssid?

Thanks.
voncrane
post Apr 7 2018, 08:32 PM

Noir et fier!
*******
Senior Member
7,120 posts

Joined: Oct 2011
From: Wakanda
QUOTE(hurricane21 @ Apr 7 2018, 07:26 PM)
Is the latest official TM firmware still have @unifi on WiFi ssid?

Thanks.
*
Yes.. It's free advertising.
hurricane21
post Apr 7 2018, 08:35 PM

Senior Probation
******
Senior Member
1,389 posts

Joined: Feb 2006
From: Southern Region
QUOTE(voncrane @ Apr 7 2018, 08:32 PM)
Yes.. It's free advertising.
*
I thought they updated and removed.
Guess just flash the EU one, from what I read in this thread, I won’t lose my HyppTV correct? Just the 5ghz WiFi band different?

Thanks.
voncrane
post Apr 7 2018, 09:49 PM

Noir et fier!
*******
Senior Member
7,120 posts

Joined: Oct 2011
From: Wakanda
QUOTE(hurricane21 @ Apr 7 2018, 08:35 PM)
I thought they updated and removed.
Guess just flash the EU one, from what I read in this thread, I won’t lose my HyppTV correct? Just the 5ghz WiFi band different?

Thanks.
*
I'm using AUS firmware.. No problems with wifi or Hypptv. Vlan tag it properly and should be okay. You probably meant 5 Ghz channels?? Possibly.
Alex9182
post Apr 7 2018, 10:49 PM

On my way
****
Senior Member
669 posts

Joined: Sep 2015
QUOTE(hurricane21 @ Apr 7 2018, 08:35 PM)
I thought they updated and removed.
Guess just flash the EU one, from what I read in this thread, I won’t lose my HyppTV correct? Just the 5ghz WiFi band different?

Thanks.
*
C1200 V1 with EU Firmware is all good except it auto random reboot itself every few days. many user here experience this.

once you upgrade to EU Firmware, there is no turning back, you can not go back to TM Firmware.
Jjuggler
post Apr 8 2018, 12:02 AM

Narcissistic Genius
******
Senior Member
1,341 posts

Joined: Dec 2016
QUOTE(hurricane21 @ Apr 7 2018, 08:35 PM)
I thought they updated and removed.
Guess just flash the EU one, from what I read in this thread, I won’t lose my HyppTV correct? Just the 5ghz WiFi band different?

Thanks.
*
less 5ghz channels. i would advise you to change to better router if you're an intermediate and heavy user. if for streaming hd videos on youtube, less downloads, browsing, then c1200 will suit you.

This post has been edited by Jjuggler: Apr 8 2018, 12:03 AM
hurricane21
post Apr 8 2018, 06:19 PM

Senior Probation
******
Senior Member
1,389 posts

Joined: Feb 2006
From: Southern Region
QUOTE(voncrane @ Apr 7 2018, 09:49 PM)
I'm using AUS firmware.. No problems with wifi or Hypptv. Vlan tag it properly and should be okay.  You probably meant 5 Ghz channels?? Possibly.
*
Oh okay, good to hear that I won’t lose my HyppTV.
Yes sorry I mean 5g WiFi channel.

QUOTE(Alex9182 @ Apr 7 2018, 10:49 PM)
C1200 V1 with EU Firmware is all good except it auto random reboot itself every few days. many user here experience this.

once you upgrade to EU Firmware, there is no turning back, you can not go back to TM Firmware.
*
EU also will auto reboot? Currently using the stock v1 firmware come original, never update to TM firmware.

QUOTE(Jjuggler @ Apr 8 2018, 12:02 AM)
less 5ghz channels. i would advise you to change to better router if you're an intermediate and heavy user. if for streaming hd videos on youtube, less downloads, browsing, then c1200 will suit you.
*
Should be no problem since my devices always connect to 2.4ghz only due to coverage.
Watching YouTube not a problem but my downloads always get inconsistent speed that’s why I am thinking to flash EU firmware. hmm.gif
AVFAN
post Apr 8 2018, 07:35 PM

20k VIP Club
*********
All Stars
24,455 posts

Joined: Nov 2010
QUOTE(hurricane21 @ Apr 8 2018, 06:19 PM)
Should be no problem since my devices always connect to 2.4ghz only due to coverage.
Watching YouTube not a problem but my downloads always get inconsistent speed that’s why I am thinking to flash EU firmware. hmm.gif
*
50mbps, 2.4ghz is fine... ethernet or wifi... if yr router is performing.

download... dunno what DL u mean, but p2p, it depends on seeds and peers.

if good enough, u should get max 50/8=6.25MBps, maybe 6.5 at times.

if poor seeds/peers... poor, zero even.

if u r consistently getting poor DL speed with wifi, u gotta think another router.
biloxee
post Apr 8 2018, 08:19 PM

On my way
****
Senior Member
561 posts

Joined: Jul 2015
QUOTE(biloxee @ Apr 2 2018, 12:54 AM)
v1.1.1 Build 20180101 rel.66049 (BETA) firmware

2 weeks+ uptime...and still going....

[attachmentid=9705368]

[attachmentid=9705370]
*
3 weeks uptime. This IP has been good to me...

Attached Image
hurricane21
post Apr 8 2018, 09:20 PM

Senior Probation
******
Senior Member
1,389 posts

Joined: Feb 2006
From: Southern Region
QUOTE(AVFAN @ Apr 8 2018, 07:35 PM)
50mbps, 2.4ghz is fine... ethernet or wifi... if yr router is performing.

download... dunno what DL u mean, but p2p, it depends on seeds and peers.

if good enough, u should get max 50/8=6.25MBps, maybe 6.5 at times.

if poor seeds/peers... poor, zero even.

if u r consistently getting poor DL speed with wifi, u gotta think another router.
*
Direct download, using Jdownloader, speed always fluctuate between 4.8 ~ 6.2 max. hmm.gif

Torrent not sure because now speed is fast enough for direct download. Last torrent was on Streamyx 2mbps time.

Can’t afford better router yet, was aiming for Asus but kind of out of budget. sad.gif
AVFAN
post Apr 8 2018, 10:46 PM

20k VIP Club
*********
All Stars
24,455 posts

Joined: Nov 2010
QUOTE(hurricane21 @ Apr 8 2018, 09:20 PM)
Direct download, using Jdownloader, speed always fluctuate between 4.8 ~ 6.2 max. hmm.gif
That speed is good la... apa lagi mau?!
« Next Oldest · Networks and Broadband · Next Newest »
 

68 Pages « < 19 20 21 22 23 > » Top
Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0296sec    0.61    6 queries    GZIP Disabled
Time is now: 10th December 2025 - 04:06 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.