Welcome Guest ( Log In | Register )

63 Pages « < 13 14 15 16 17 > » Bottom

Outline · [ Standard ] · Linear+

 Dell XPS M1210 Support Thread #1, COD4? No problem...

views
     
NewbieBetta
post May 26 2007, 02:43 AM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



im gonna try dismantle my system tomorrow..to apply AS5,saw those technician dismantle so many time,even i had remember those step clearly..the call center even address them as engineer..omg.."ill dispatch my engineer to your house" for me technician suit them better..

erm..what is the latest nvidia driver u guys are using,i had downloaded 94.22 from dell site,but i was unable to unzip it,it give me duno what error saying have to put in 1st part of the disk..weird
redjol
post May 26 2007, 05:03 AM

Getting Started
**
Junior Member
224 posts

Joined: Apr 2007


QUOTE(Eiraku @ May 26 2007, 12:15 AM)
EDIT: You sure its a new XPS Lappy and not just the XPS 720 H2C Desktop that Dell's already gonna launch stateside? It would be sweet if they'd launch that ultra desktop here, but it's huge and hugely expensive anyway... icon_rolleyes.gif


Added on May 26, 2007, 12:23 am

*
not desktop xps dude..it's a notebook ...


Added on May 26, 2007, 5:09 am
QUOTE(dingding @ May 26 2007, 01:43 AM)
well, i guess most of the technicians dont really know all the systems. there are like so many types of model of laptops and they dun have like specific team to deal with certain models.....
everytime they open, they seem uncertain of the stuff. some are juz like trial and error.... some always forget to remove certain screws and then try pulling it out hard then oni realise..... =.=''.....
*
yeah, they only know just certain model..unlike technician in production..

This post has been edited by redjol: May 26 2007, 05:09 AM
dingding
post May 26 2007, 04:10 PM

Getting Started
**
Junior Member
248 posts

Joined: Oct 2005


QUOTE(death_nite @ May 26 2007, 02:29 AM)
alamak...like dat he cannot be technicion laa..

if wanna dismantle smthg...there's 1 rule must follow....make sure u did wat ever u did b4 in reverse format...

like step A B C D E then when we wanna put everythg back we should do step E D C B A...

dismantling a notebook is easier than wat it look...one should hv good memory as if one does not hv good memory, one should not be a technicion laugh.gif

but seriusly laa...even he dismantling many system, he shoudl rmmbr the step he did b4...i cant forgive such mistake...

last time, rite after dell techie change my procs...after several week, i decided to dismantling my notebook....bcos last time he didnt apply new thermalpaste...temp kindaa high then usual...do rmmbr...this is my 1st notebook...nvr dismantling any notebook...n dat was my 1st time wacthing people dismantling a notebook...with my 1st attempt, i successfully dismantle n putting it back together without forgeting any step....y? bcos i am carefull...as long as u carefull, sure wont forget any steps...haih....

if clumsy....haih...no hope sweat.gif actually i should complaint to dell...but donwan larr... smile.gif
*
if you're careful, it's gonna be fine.... and moreover, it's ur own lappie sure u're gonna sayang it more, scared to scratch it or do any damage.... but for the technicians, they are kinda rushing coz they still need to go to other customers one.... so basically, they juz need to solve the problem complained by the customer.... they don't mind cropping up new problems.... =).... juz like my system.... every time they come = new problems cropping up after they get the initial problem fixed.....

This post has been edited by dingding: May 26 2007, 04:14 PM
NewbieBetta
post May 26 2007, 05:28 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



hmm..i had 6 times of service,changed 2 mobo, 2 Ram, 1 fan & heatsink,1 palm rest & bottom casing...

do you guys think i should ask for a replacement unit,even now my system is running fine..actually im kinda piss off now..my RM5k+ baby has become like a SH*T with scratches & the laptop body stickers all get rip off & then stick back again..

how many of u guys think i should ask for replacement unit?

This post has been edited by NewbieBetta: May 26 2007, 05:29 PM
dingding
post May 26 2007, 05:31 PM

Getting Started
**
Junior Member
248 posts

Joined: Oct 2005


if you wish to, juz ask for it. I think your request is quite reasonable after giving so much trouble and defacing to it.....


Added on May 26, 2007, 5:39 pmn for my case, dell said in view of the problems i faced, if i'm still unsatisfied, they can giv a full refund (mine is long over 14 days adee)..... so if you wish to get a refund i think you can too request for it....

This post has been edited by dingding: May 26 2007, 05:44 PM
NewbieBetta
post May 26 2007, 10:57 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



just dismantle my system & apply AS5..but the temp still same with default thermal paste..will update u guys after 1 week..

easy to dismantle..but must remember the screw carefully..u might get it mix up
TSEiraku
post May 26 2007, 11:08 PM

Geeking since 1985!
*******
Senior Member
7,037 posts

Joined: Apr 2006


QUOTE(NewbieBetta @ May 26 2007, 05:28 PM)
hmm..i had 6 times of service,changed 2 mobo, 2 Ram, 1 fan & heatsink,1 palm rest & bottom casing...

do you guys think i should ask for a replacement unit,even now my system is running fine..actually im kinda piss off now..my RM5k+ baby has become like a SH*T with scratches & the laptop body stickers all get rip off & then stick back again..

how many of u guys think i should ask for replacement unit?
*
+1 Vote for a replacement unit...You paid for the bloody thing, you have the right for good service... Though legally, you're not protected... The CompleteCover clause DOES say that external cosmetic defects that do not affect the operation of the computer itself ARE NOT bound to the CC service... sweat.gif

But you have your rights, and it was Dell that created them cosmetic defects in the first place... Be loud and assert your rights! And by that I say call them and give them hell... icon_rolleyes.gif

We're (or at least I am) behind you all the way... thumbup.gif


Added on May 26, 2007, 11:12 pmAs a side note, I'm currently typing from my room using my XPS, a floor away from the computer I used to surf the net with, thanks to my brand new Belkin WirelessG router courtesy of my latest Low Yat raid this afternoon... drool.gif

Other spoils of war from the raid include the CM Notepal P1 and a Canon MP-160 multipurpose printer (which is not exactly mine, as I helped a friend to buy it)... icon_rolleyes.gif

Short reviews of all three will be featured here, and if I have time, I'll type out loooooooooooooong, in-depth reviews for LYN later... thumbup.gif

This post has been edited by Eiraku: May 26 2007, 11:17 PM
NewbieBetta
post May 27 2007, 12:13 AM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



yup..i call them & just few 5min of talk..they agree on giving me a replacement unit..yeah..hopefully the new unit wont giv me any trouble
TSEiraku
post May 27 2007, 12:33 AM

Geeking since 1985!
*******
Senior Member
7,037 posts

Joined: Apr 2006


FIRST IMPRESSIONS (AKA QUICK REVIEWS)

COOLERMASTER NOTEPAL P1

PROS:
- Sexy design.
- Sturdy full aluminium construction.
- Powered by a single USB port.
- Cheap for a CM product (RM70++).
- Good build quality (the only problem are the rubber feet, some are not well stuck out-of the box and needs a good press to securely stick them)
- Good, solid replacement for the "thick book" I've been using to improve the air circulation on the XPS's bottom.
- Really compact.
- Tilts the XPS at a good angle (not intentional actual)
- Really, really quiet fans... icon_rolleyes.gif

CONS:
- Marginal cooling (from 52-54 deg CPU, 55 GPU at idle - using the "thick book" - to 47-52 deg CPU, 52 GPU - as reported by I8kfanGUI)
- Doesn't quite fit the XPS M1210 (Had to push it to the left side of the cooler to make sure the airflow hits the CPU/GPU fan intake... And even then it's not optimal as I can't push it further back, the center of gravity of XPS will cause it to pivot on the Notepal P1).

LAST WORD: Not as good as the Zalman NC-1000, but sure as heck cheaper (by RM100)

RATING: 6/10

BELKIN WIRELESS G ROUTER

PROS:
- Router itself really, really light and small.
- Lifetime warranty (even against lightning)
- Acceptable performance for such a small router (3 bars reception through 2 walls and a staircase... Not bad for a single antenna, and I haven't screwed it in optimal position on the wall yet).
- Good build quality.
- No build in ADSL modem (a plus for me as I don't mind the TMNUT modem getting zapped by lightning as it's covered by TM, but I DO mind my RM150 router getting zapped)

CONS:
- Huge, heavy power brick.
- Not exactly cheap at RM150 a pop (you can get other brand routers at RM20-30 cheaper).
- Plasticky in nature (feels flimsy even though well build... Because it's so light?)
- Intermediate set up difficulty (A first pass using the Wizard failed, maybe because I didn't restart the ADSL modem?)

LAST WORD: Small, light and capable... With lifetime warranty!

RATING: 8/10

Haven't unpacked the Canon Pixma MP-160 yet, maybe tomorrow... icon_rolleyes.gif

This post has been edited by Eiraku: May 27 2007, 12:42 AM
TSEiraku
post May 27 2007, 12:41 AM

Geeking since 1985!
*******
Senior Member
7,037 posts

Joined: Apr 2006


QUOTE(NewbieBetta @ May 27 2007, 12:13 AM)
yup..i call them & just few 5min of talk..they agree on giving me a replacement unit..yeah..hopefully the new unit wont giv me any trouble
*
Good to hear, dude! Keep us posted... icon_rolleyes.gif
eyen
post May 27 2007, 01:48 AM

Casual
***
Junior Member
461 posts

Joined: Jan 2003
Hey, Eiraku,

What's the model of the belkin wireless G router?

I'm looking for one too and a shop here quoted me RM200 for a Linksys (two antenna, not sure whats the model #) wifi router.
dingding
post May 27 2007, 01:50 AM

Getting Started
**
Junior Member
248 posts

Joined: Oct 2005


the linksys one i suppose it's a WRT54G
death_nite
post May 27 2007, 02:08 AM

Lossless Land...
*******
Senior Member
2,366 posts

Joined: Jun 2005
From: Not Here Not There...


QUOTE(NewbieBetta @ May 26 2007, 10:57 PM)
just dismantle my system & apply AS5..but the temp still same with default thermal paste..will update u guys after 1 week..

easy to dismantle..but must remember the screw carefully..u might get it mix up
*
did u clean the heatsink n procs properly?
TSEiraku
post May 27 2007, 02:11 AM

Geeking since 1985!
*******
Senior Member
7,037 posts

Joined: Apr 2006


QUOTE(eyen @ May 27 2007, 01:48 AM)
Hey, Eiraku,

What's the model of the belkin wireless G router?

I'm looking for one too and a shop here quoted me RM200 for a Linksys (two antenna, not sure whats the model #) wifi router.
*
It's F5D7230ak4... Linksys is supposedly better, but like everything else, I'm warranty-centric (main reason why I got a Dell anyway) and so I got the Belkin... And I didn't want the ADSL that came with the Linksys (plus the fact that the Linksys is HUGEEEE in comparison to the Belkin)... icon_rolleyes.gif

Lifetime warranty (even against lightning strike... drool.gif ) on the Belkin (or any Belkin for that matter... I still have the Belkin wireless G card for my old C2220, and unlike the previous D-Link one, it gave me no problems at all, under Windows OR Linux... icon_rolleyes.gif), 2 years warranty if I'm not mistaken on the Linksys (gotta check my raid-book later for the Lowyat price for the Linksys)... icon_rolleyes.gif

Brand ranking for routers (or any network hardware - based on my collective experiance):

1) Linksys (high performance)
2) Belkin (lifetime warranty, good performance)
4) Aztech (cheap, quite ok)

Avoid D-Link like low end Acer lappies... They are well documented to be problematic... And I personally watched my D-Link G+ wireless card die on me for no apparent reason... sweat.gif

This post has been edited by Eiraku: May 27 2007, 02:15 AM
eyen
post May 27 2007, 02:39 AM

Casual
***
Junior Member
461 posts

Joined: Jan 2003
QUOTE(Eiraku @ May 27 2007, 02:11 AM)
It's F5D7230ak4... Linksys is supposedly better, but like everything else, I'm warranty-centric (main reason why I got a Dell anyway) and so I got the Belkin... And I didn't want the ADSL that came with the Linksys (plus the fact that the Linksys is HUGEEEE in comparison to the Belkin)... icon_rolleyes.gif

Lifetime warranty (even against lightning strike... drool.gif ) on the Belkin (or any Belkin for that matter... I still have the Belkin wireless G card for my old C2220, and unlike the previous D-Link one, it gave me no problems at all, under Windows OR Linux... icon_rolleyes.gif), 2 years warranty if I'm not mistaken on the Linksys (gotta check my raid-book later for the Lowyat price for the Linksys)... icon_rolleyes.gif

Brand ranking for routers (or any network hardware - based on my collective experiance):

1) Linksys (high performance)
2) Belkin (lifetime warranty, good performance)
4) Aztech (cheap, quite ok)

Avoid D-Link like low end Acer lappies... They are well documented to be problematic... And I personally watched my D-Link G+ wireless card die on me for no apparent reason... sweat.gif
*
Ah I think the linksys I saw is just a wireless router.Not too sure though but I've always thought Belkin will be more expensive.

My problem now is that I have a desktop that's still running on Pentium 3 so I would have to find a wireless card/adapter (not sure what it's called) that will work on the Pentium 3 and is also compatible with the wireless router at the same time.

The wireless G router, can it work on "A" or "B"? Apologies for the noob question blush.gif

This post has been edited by eyen: May 27 2007, 02:39 AM
TSEiraku
post May 27 2007, 03:04 AM

Geeking since 1985!
*******
Senior Member
7,037 posts

Joined: Apr 2006


QUOTE(eyen @ May 27 2007, 02:39 AM)
Ah I think the linksys I saw is just a wireless router.Not too sure though but I've always thought Belkin will be more expensive.

My problem now is that I have a desktop that's still running on Pentium 3 so I would have to find a wireless card/adapter (not sure what it's called) that will work on the Pentium 3 and is also compatible with the wireless router at the same time.

The wireless G router, can it work on "A" or "B"? Apologies for the noob question  blush.gif
*
B yes... A no... G definitely... icon_rolleyes.gif

Yeah Belkin products tend to be more expensive, but with the lifetime warranty it's well worth it... I think it SHOULD work with a Pentium 3... I'll recheck the box for the minimum reqs...

But if you don't care for the warranty and need a little bit extra speed and coverage, the Linksys should deliver... icon_rolleyes.gif
NewbieBetta
post May 27 2007, 11:28 AM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



QUOTE(death_nite @ May 27 2007, 02:08 AM)
did u clean the heatsink n procs properly?
*
yeah..follow those AS5 applying method from their website..
derred
post May 27 2007, 11:30 AM

alienated
******
Senior Member
1,238 posts

Joined: May 2007
@ NewbieBetta,

Its good to hear you got the replacement unit. About the AC5, hmm its an awkward result but u can ask in details if u need anything.

This post has been edited by derred: May 27 2007, 11:31 AM
NewbieBetta
post May 27 2007, 02:16 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



i dint notice any improvement in the temp on my current system..will need some time i guess
eyen
post May 27 2007, 03:00 PM

Casual
***
Junior Member
461 posts

Joined: Jan 2003
QUOTE(Eiraku @ May 27 2007, 03:04 AM)
B yes... A no... G definitely... icon_rolleyes.gif

Yeah Belkin products tend to be more expensive, but with the lifetime warranty it's well worth it... I think it SHOULD work with a Pentium 3... I'll recheck the box for the minimum reqs...

But if you don't care for the warranty and need a little bit extra speed and coverage, the Linksys should deliver... icon_rolleyes.gif
*
Thanks! I'm quite surprised that you got the wireless router for RM150 only whereas the linksys I saw is RM200. Maybe the linksys comes with a built in adsl modem or something.
Or maybe the extra antenna is worth RM50? haha quite unlikely.

Back to the xps, what do you guys use to wipe the front casing of the laptop? The "fingerprint magnet" place.Coz mine has quite a lot of smudges on it.Not sure if I should use a normal wet cloth or any special cloth?

And for wiping the lcd screen, what do you guys recommend?

63 Pages « < 13 14 15 16 17 > » Top
 

Change to:
| Lo-Fi Version
0.0291sec    0.64    6 queries    GZIP Disabled
Time is now: 19th December 2025 - 03:39 PM