aik... me mange to set till 500FSB only 501FSB just satck at POST.
i just disable C1ST and the memery there set to FAST FAST then other unchange = =

Ask our sifu of overclocking: coolice

wth..got wat related with me

why dont we do something like this for references???

Ram Settings
DDR Configuration Mode : Mode 1
GTL+ Driving Strength : Mode 2
Enhanced Data transmitting : Fast
Enhanced Addressing : Fast
Channel 1 CLK fine Delay : n/a
Channel 2 CLK fine Delay : n/a
DQ Calibration :5
CAS Latency Time (tCL) : 3
DRAM RAS# to CAS# Delay (tRCD) : 3
DRAM RAS# Precharge (tRP) : 3
Precharge Delay (tRAS) : 9
All Precharge to Act : Auto
REF to Act Delay (tRFC) : Auto
MCH ODT Latency : Auto
Write to PRE Delay (tWR) : Auto
Rank Write to Read (tWTR) : Auto
ACT to ACT Delay (tRRD) : Auto
Read to Write Delay (tRDWR) : Auto
Ranks Write to Write (tWRWR) : Auto
Ranks Read to Read (tRDRD) : Auto
Ranks Write to Read (tWRRD) : Auto
Read CAS# Precharge (tRTP) : Auto
All PRE to Refresh : Auto

Voltage Settings
DRAM Voltage Setting : 2.0v
VTT Voltage Setting : 1.2v
NB 1.25V Setting : 1.35v
SB 1.5V Setting : 1.5v
SB 1.05V Setting : 1.05v

not fully played with it yet.... will post update later when i have time to tweak

This post has been edited by sup3rfly: Jun 18 2007, 11:54 PM

haha thks sifu later try try alot function there but dunno what meaning so dunno how to set

those mode 1, 2, 3 what effect ?

3-3-3-9 too tie for me 6320 1:1

This post has been edited by taxidoor: Jun 19 2007, 12:07 AM

3339...wow...but for a start ok la kot...
another question, how hi can u mobo goes up? trying to see how hi can it goes...mmm...to test the mobo, i shud change which voltage? the NB only or NB and SB and VTT...vcore depends la on the cpu speed which ofcourse i will drop down the multiplier to 6x...

hi there...i m not a sifu la.... well according to OPB and other sifus...they say they didnt increase any nb voltage up til 500 fsb...so may b u may wanna try that

will do that tonite...now my rig is cpuless
hopefully my new proc will arrive today

thx remysix, i hantam 2:3 and see what happen..........

taxidoor: what themes u using? hehe.. seems nice

latest bios : http://us.dfi.com.tw/Support/Download/bios..._FLAG=B&SITE=US

latest mod bios : http://www.lejabeach.com/DFI/dfiinfinity965s/

thanks raymond...
that beta, how does it perform compared to the ori one other than unhid those strap and adding the extra tras?
rite now my rig is cpuless...sold my e66 but the q66 has not arrived yet ... will only be getting it tonite...hope to see a good result

the moded bios seem nth special wor ?

walao eh..raymond..u check everyday got new bios or not izzit
anyway..still thanks for the information

lol nices thing is not good to use

mod bios nothing special but atleast u can chose the strap to play with

no check everyday la bro.........
just happen to check today morning haha.............

bro, can share how u run ES on DFI board?

can't remember bro...
just test ES proc for 2days & returned it to my friend ady

Hurmmm...should I rip out the E2160 from another PC and put it into this torture chamber? Still thinking. Gatal edi my tangan