cit...kasi suspen je...
what kind of ram hang pakai...crucial ofcourse...
wait a minute...u said (typed) 450x9...tot 400...
kasik balik boleh?

Sorry, typo.
Bkn 450 X 9.

Tapi 450 X 8

Sedap betul e6600 aku kalau boleh run kat 450 X 9 stable.

bikin gabra je
btw, care to share ur bios setting...figuring how to tweak the bios...

Amenda aku nak tunjuk kat ko ha?
Aku pun tak tau.

Anyway, first and foremost, update bios ko ke 0424, banyak setting unblock guna bios 0424.
Stock bios banyak benda kena tutup.

got a weird problem here again, need some advice?

after i put my rig to 320*9 ~ 2.88ghz, i manage to run super PI32M but orthos cannot go for more then 10 sec......but gaming and everything is fine

ok so i let it be, then weird problem again when i try to startup it up again later, no reaction at all......
try clear the bios, USB device all unplug no use... and finally reset the ram it alive again.......

btw i let the ram in default setting of 5,5,5, 18......could it be the ram problem ?

This post has been edited by LExus65: Jun 17 2007, 01:08 AM

Yes.
Ram problem.

You should think of using Crucial Ballistix or Crucial Ballsitix Tracer.

i think u need to share more info...what's ur vcore set in bios, the orthos u ran for which test...large or small fft or blend...i dun think it's ur ram coz SPI32M ok and ur ram is rated at 800DDR...but then again, did u run ur ram at 1:1? if 1:1, 640DDR is nothing for that ram...
of course...all other memory brand no good, only Crucial is good and to be precised Ballistix and Tracer

ic, thx for info, i try to adjust the ram timing and see how..........sorry for the slow reply another rig broke down, still figuring out what is wrong

i leave everything at default, ram runnig at 667(4:5 if not mistaken), so 320mhz on processor on make the rams runnig at 400.....

voltage size i push the NB 1.5v and SB 1.3v (up 1 mark from the bios setting, i could recall which is which, hopefulyl it's correct), other all auto so should be default, i try all small, large and blend all also not working.....

shawty i'm waiting for ur ram.........hehe

orthos is

to be sure, why dun u run the memtest86+ test #5 and #7...then can rma the ram

yupe i will try that, mushkin has serve me well for quite sometime, so no doubt on it........may be i should use manual setting instead

dark doesn't go well with 4:5 divider
try using 2:3

the Dark Master has spoken

anyone can share their Genie, Voltage setting?
would like to start from there and move forward...btw, how hi can ur board clock?

Bro, apa citer ngan rig baru ko?

sok baru sampe the Q6600, and aku tak abih lagi belajo taming the Dark...balik rumah from work, dah ngantuk. slowly learning...but maybe esok onwards will do extra study on this Dark. hope to get a good result
mana screenie nya...tak abih lagi hang tweaking the ram setting...

Hang ingat senang nak tweak 900MHz?
Kalau 800MHz @ 1000MHz, reti la aku.

Nak kena set satu satu wei.

like that one ka...
hmmm...pm la kat aku hang nyer setting...aku nak belajo la...
how hi can u push your board...not literally but the Mhz

Guys finally got my Proc

hehe no tweak anything yet, csz dunno tweak
just pump vcore and vdimm
and the result is 500FSb




Attached thumbnail(s)

What ram is that?

lol kingston DDR533 D9GMH = ="
any 1 can spare me ur bios setting? dunno set ler

nice clocking there bro...i also asking if anyone can share their bios, but no luck yet...everyone is holding back their secret recipe