anyone using 4gb of rams on this board....

i tot 4gb only will be shown on a 64bit OS............even a 32bit Vista also useless

yo guys any idea actaully the system temperature indicated by smart guardian ? it seems mine is shooting above 55C and triggering the alarm................

any suggestion to cool it down ? i'm on stock speed with HR-01, rely on rear casing fan for ventilation only........

mine was giving warning at 45 at first i install........btw i didnt use any cpu or north bridge fan........

will try to get some fan to blow the hell out of it........

wah cpu-z also not reliable nowadays............ OMG

btw ur 8800GTS core clock can go up so high.........wow nice

This post has been edited by LExus65: May 29 2007, 06:35 PM

i dun think u would like to do autocad on Plasma Tv, resolution very bad.........a 30" DEll would be a better choice

got weird problem with my Dark, everytime i boot into window when the smart Guardian goin to start the system hang and restart itself, it will keep on doin it......

but after i manually shutdown and restart, once or twice it will work again..... everything still kept at stock....... really annoy me when just want to relax and play a game, would plug in the floppy molex would help ?

btw i goin to try flash the bios and see how it goes.... i'm using the original bios come with rev 1 board.......

This post has been edited by LExus65: Jun 1 2007, 01:45 PM

plug in floppy molex also does not solve the problem........have to try flash bios already now........

Edited: after few hours trying, manage to Flash Bios to the lastest version and fix everything again......but it seems not working too....... OMG.....

This post has been edited by LExus65: Jun 2 2007, 01:55 AM

i think i have manage to solve my little crisis after doin few hours of burn in with sandra sisoft and dun let the Smart Guardian to run automatically at startup....... weird problem.........

thx shawty i'm still looking for the sensor probe too........... i think i goin to hantam 1 big fan or heat sink on the southbridge and see what happen.............. mine was shooting like crazy 55C

welcome to the Dark Side of P965..............

got a weird problem here again, need some advice?

after i put my rig to 320*9 ~ 2.88ghz, i manage to run super PI32M but orthos cannot go for more then 10 sec......but gaming and everything is fine

ok so i let it be, then weird problem again when i try to startup it up again later, no reaction at all......
try clear the bios, USB device all unplug no use... and finally reset the ram it alive again.......

btw i let the ram in default setting of 5,5,5, 18......could it be the ram problem ?

This post has been edited by LExus65: Jun 17 2007, 01:08 AM

ic, thx for info, i try to adjust the ram timing and see how..........sorry for the slow reply another rig broke down, still figuring out what is wrong

i leave everything at default, ram runnig at 667(4:5 if not mistaken), so 320mhz on processor on make the rams runnig at 400.....

voltage size i push the NB 1.5v and SB 1.3v (up 1 mark from the bios setting, i could recall which is which, hopefulyl it's correct), other all auto so should be default, i try all small, large and blend all also not working.....

shawty i'm waiting for ur ram.........hehe

orthos is

yupe i will try that, mushkin has serve me well for quite sometime, so no doubt on it........may be i should use manual setting instead

thx remysix, i hantam 2:3 and see what happen..........

wah ace combat quad core can run at 3.0ghz.....nice.....can post some screen shot,

btw i have a question over here, anyone have problem with the on board sound during OC, it seems my onboard sound is giving me problem after 320mhz....eventhough it's super PI and orthos steady, the sound does not work properly. any idea how to trouble shoot on this.

egg boiler........hehe nvm lar u can always use peltier like dell 720H2C........... now they manage to get 3.6ghz on 43 cores....... i believe ur will be able too........

icic thx for the info almostthere, i'm planning to get a sound card soon too........x-fi is just too expensive and nothing in between is to my liking...... may be i do what u said and see how it goes.......

DFI normally show slightly higher reading, but it should be normal as 266 fsb is actually 266.666667.........so u add up until 340 should end up slightly different i guess

nice.........how about the up coming 9000 series processor ?? thinking of goin quad core next year

ur voltage drop is kind of too much for this DFI board, it should be around 0.05v or so...........like 1.325 show around 1.28 ........may be power supply problem perhaps.........

anyway ur mushkin ram can be push till 2.1v without problem as long as u have some cooling on it........

anyway something to share here, DFI p965 Dark runs perfectly on q6600 G0........still in progress of tweaking...... initial result stock voltage reach 3.15ghz without any problem, all cPU features still on better then i expected