walao....nearly 4Gz.....    
from me..?

well,taxidoor,i faced the problem like u too,looks like the cpu-z is not reading the multiplier correctly....

and coolice,i got a qwuestion to ask u,hope u dont mind....
u hitting 4.0Ghz while i hitting 3.6GHz,why there is no big different in the superpi 1M?

and one thing,i tested before,a super hot processor really process slower than lower speed but cool processor.

wah.....this really make a big different ah?

So, can this be said that E6420 with 4MB L2 cache definitely faster than E6400 with only 2Mb L2 cache.

according to Shawty, it doesn't. Maybe I'll ask around for you

owhh so, what the advantages??

Arghhh, got a dreaded BIOS checksum corrupt earlier when I meddled with the DRAM timings (4-4-4-10 @ 962Mhz). Had to clear the CMOS then phew it worked again. I've forgotten how "aaaaaaaahhhhhhhhhrrrrrhhhhhhh" OC-ing can be.

So it's sitting pretty at 320FSB @ stock vcore and DDR2-962Mhz @ 1.95v. 

Now itchy to flash the BIOS....

hurmm, in commando i cant see the limit set for RAM
only avail the adjustable value which is default 266 where user able to key any value they would like to &;
another option where the select able option speed(MHz) already there such 533, 667, 800, 1600 -- is this what u all mention bout?

w0rait then, so, how am i gonna use the divider? izzit like this :-
put 266Mhz for the cpu FSB & select 667/ 800Mhz for divider??

tried once at 501fsb,6 hours....anything i can help u?

ya bro,try to run both ram together but in single channel mode.

Coolice,will keep u updated soon,i know if u ask like that,ur pc sure got kangtau liao.... 

I'm using 4GB of Kingston GMH here,but only can detected 3.5GB....
i also change a lot of ram on this mobo,all run dual channel with no problem.

@Coolice,i tried 510MHz,prime stable,but i got increase voltage for northbridge.(fsb)
no screenie,cause that time i dont have keyboard.

volt for.....?
CPU,1.5V (3.5GHz)
Ram is CL5 with 2.2V

500x6 still no go, even with the Enchanced memory settings set to Auto, although I did mess with 2 other settings; the DDR configuration mode (mode 3) and GTL driving strength (mode 2). Hmm, had to reset the CMOS after that. The reset + insert trick doesn't work oso. How long to press, is there any audio clues that it's working ?

Will try more combinations this wekeend la (maybe).

yehlai : thanks

raist86 :1.5v for 3810mhz and 1.62v for 4027mhz, cpu-z can't read it correctly..

1st and the main reason is due to its good performance in terms of stability @ stock and oc speed..

2nd and also very important reason is bcoz of its very cheap price