hurmm, in commando i cant see the limit set for RAM
only avail the adjustable value which is default 266 where user able to key any value they would like to &;
another option where the select able option speed(MHz) already there such 533, 667, 800, 1600 -- is this what u all mention bout?

the one adjustable is ur cpu fsb,while the option speed like 533,667,800 and so is divider

w0rait then, so, how am i gonna use the divider? izzit like this :-
put 266Mhz for the cpu FSB & select 667/ 800Mhz for divider??

I would install my windows on EVERYTHING STOCK. no overclocking.

Once the windows xp installation when through every that need to be installed go installed in the system. Try restart a few time to lock all windows setting then only I will try out the overclocking.

I am still waiting for my c2d E6600 now running Pentium D 930 and manage to touch Memory 502Mhz at speed 3770 Mhz. The system is running 24/7 and very stable. The PentiumD is very hard to anything more than 4 Ghz.

266:533=1:1
266:667=4:5
266:800=2:3
anyone can explain about y 266:533 is not 1:2 instead of 1:1?
may be ram is double data rate?

i am running stock, in fact i'm running fresh install. everything formatted. it happens after second restart where trying to install files

ahh ic.. thanks br0 u da' man
im in kamp0ng act. cant test the setup yet. will try it after go back home

ok just took out one of the rams... now past the errorr stage that got me stuck earlier...

hopefully not the ram stick that's in trouble.... new ooo..... some more no memtest cd

coolive i think u got the wrong idea.... the 266 is the n/b strap
in the bios option there is only
533
667
800
this is the divider for the ram....
is that what u all want to know?

actually 266 refers to ur cpu fsb, while 533, 667 and 800 refer to ur ram speed..

why is 266:533 is 1:1 and not 1:2? bcoz intel fsb is times by 4 (266x4 = 1066) .. while ddr is times by 2 (533x2 = 1066)

Mod bios with NB Strap selectable up to 400mhz

download link : http://www.lejabeach.com/DFI/dfiinfinity965s/


Attached thumbnail(s)

It seems like PC Wizard 2007 is not compatible with our boards ler.
As when i use the ITE Smart Guardian software that comes in the driver cd, it shows my +12V rails as 11.96Volts.

Seems like PC Wizard 2007 is not compatible with DFI Infinity P965-S after all.

Almost and the other sifus: Even after selecting CPU Fan 100% in the BIOS, the CPU fan still stays dynamic , starting at ~1.5krpm and goes higher as needed. Something wrong ar ?



p/s: What are the latest changes in the 424 BIOS ?

at Smart Guardian select Options set all the fan control option to Software Control and set Fan Speed Control to full. That would sort it out

This post has been edited by almostthere: May 2 2007, 03:19 AM

Yup, that did it, thx !
4 minutes of Orthos and CPU's around 67 degrees @ 2.88Ghz
Idle is 39 degrees.

Eoma,what cooler u usng?
sound kinda high when load.

anyway,my SmartGuardian showing not really accurated....
if u guys think it's accurate,then me liao,cause me facing heavy vdrop problem now....

I'm using a standard stock cooler, cleaned off the thermal paste with nail polish cleaner and then applied artic ceramique. I've also attached a 4.5k rpm P3 fan to teh NB, and closed my casing. Getting CPU temp 52 deg, NB temps of 41 deg, and system 64 deg (???!!!)

really meh ?

w0ot br0? switch into c2d already ka?
how the overclocking experience goes on?
any nice tips/ gud result can be shared here??

i think ur hot air is blowing to the mobo's temp sensor liao as on my setup the mobo temp is the lowest among all...

This post has been edited by sup3rfly: May 2 2007, 03:40 PM

ur sensor siao already,maybe it's facing hot air like bro sup3rfly said.

try adjusting the fan and modify the air flow direction.