I'll be interested if you can bring in Crucial Ballistix [Non Tracer] PC6400 if it'll be below than RM700!

don't know whether where are you getting from but mwave seems to be selling below RM1000. currently it's one of the cheapest online store to get crucial ram.

http://www.mwave.com/mwave/ViewProduct.asp...1&SortMethod=11

Interested

But depends on pricing

edited: tracer and non tracer, what is the difference?

This post has been edited by irangan: Apr 28 2007, 10:58 PM

hey guys..u all realy OT alot edi..back to topic pls

diff. by the LED on Tracer & none for non-Tracer

http://www.jonnyguru.com/forums/showthread.php?t=2117

this is kinda interesting. Silverstone psu with Dfi Dark.

previously i also facinf vdrop problem with my psu with this dark power,but now seems to be ok already.

Any reasonable explanation why? Due to plugging in the floppy molex or your house AC outlets stabilized already?

I don't know what to say.
You guys tell me what happen.

Using new Silverstone Olympia 650W, but why is this happening?
Tried with other PSU also the same.

I'm facing the same problem as well....
+12v reported as 11.77v and +5v reported as 4.91v.

Using Silverstone ST85ZF....
When i used my Acbel 500w, the +12v reported it as 11.91v....

try measure it by DMM

What's a DMM?

digital multi meter

I think this got something to do with the PC Wizard program. I am personally having the same problem as well from my CM Real Power to my new SS ST56F..But in bios, it is showing fine..

If I were you guys, I'd wait for FCG to update his MBM5 plugin as that's quite reliable and accurate for general purpose. The only problem why I can't recommend one to use it now is because the core temp driver seems to cause the CPU usage to shoot up quite high

This post has been edited by almostthere: Apr 30 2007, 12:01 AM

coolice just found this 965-S Voltage measurement points

enjoy

This post has been edited by sup3rfly: Apr 30 2007, 12:40 AM

I remember i read from somewhere, the OCZ's oc-ability lost out to the Crucial Ballistix, so, definitely the OCZ's chips r not the best for OC C2D.

On the otherhand, if i'm not mistaken, G.Skill uses Micron's D9GMH chips, so, definitely the best solution for C2D.

I suggest, the G.Skill, unless budget is a constraints. But i doubt since u can choose between those 2.

Just my 14cents.

LOL thanks alot...saved me alot of work looking for it. Think we should get TS to include all this in 1st page

Just got my system up and running today.
Will tweak tommorow!

Update:

Currently running it at 320x9 = 2883Mhz @ stock vcore, DDR2 @ 802Mhz @ 1.9V
Running hot @ ~60 degrees. Man, i need a better cooler. System temp is way high too.

Well, here are some pics:

Cpu-z


At 3.06Ghz :



Super pi 1M is ~ 17sec @ 3Ghz and 18++sec @ 2.88Ghz

I also tried running the RAM (shawty's Super Talent bulk) @ 960Mhz @ 1.95v (hope i'm not killing the RAM).



And a Smart Guardian pic, i too get the srange voltage readings from my ST56F


I haven't meddled with the DRAM timings yet. Any suggestions ?
Also any HSF/cooler suggestions. Panas la.

Update: Seems my case air flow sucks big time. It runs much cooler with the side panel off. Hmmmmm. more work there.

This post has been edited by Eoma: Apr 30 2007, 04:29 PM

The RAM is D9 should be able to tahan upto 2.5v VDIMM, so now worries. BTW, the FAN set 100% or auto still? Mine stock cooler temps ok wat. And what strange voltages you mean?