Unifi Plus Box can work over WiFi. Just use WiFi for the UPB.

The old Unifi HyppTV box will only work over Ethernet LAN.

However, if your account already migrated to UPB, then the old Unifi TV will not work IINM.

Make sure IGMP version is changed to V3 on the firmware interface.

This post has been edited by blacktubi: Apr 11 2021, 11:08 PM

Thanks it works now after change to V3. Anyone notice the signal broadcast will degrade compare the 1st week? Suddenly this week the signal so weak ...

May i know can c2300 can support celcom fibre?
I don't see the celcom fibre profile, manual setting?

Hi

Has anyone tried converting TP Link EC230-G1 (AC1350 Wireless Router) into an AP?

This is an extra Time unit, I tried but couldnt set it up to work as an AP.

Yes, manual setting

-

This post has been edited by aniq8676: Apr 15 2021, 11:14 AM

TP Link EC230-G1 model supplied by TIME cannot be used as an AP, because the firmware in the model is a modified version by TIME and even some functions in the router have been disabled.

Thanks for the confirmation

Hi guys,
Need your advice. Bought AX20 to replace faulty Netis AC1200.
During installation I just realise AX20 dont have DSL port.
Is there any workaround or I need to buy other router with DSL port?
The setup suppose DSL cable from wall to router with no BTU if I understand correctly.
Thanks.

are you a VDSL user? If so, you have to buy another router that uses VDSL. I recommend you an Archer VR400 or VR600v router

Archer VR400 RM269


Archer VR600v RM339


both are still using WIFI5

Yup. Still on VDSL. May I know HyppTv will work on this model?
Thanks

should be yes, as both models have VLAN support

Here is the VLAN setting for hypptv

VLAN ID: 600
VLAN Priority: 0

Thanks for your recommendation. Bought Archer VR400 and all working fine now

yeah feel the same also. Signal is strong for first 2 weeks, now feels signal weaker.

Those with Archer AX73 or any 160Mhz WiFi 6 router, consider disabling the 160Mhz mode unless your devices support 160Mhz.

Disabling 160Mhz will provide better overall performance for 80Mhz clients.

Hi! May I know for Times TP Link EC230-G1 can it be use for Unifi. As I tried config using my unifi PPPoE without success of getting into the Internet. Any other settings need to be done? Thanks.

enable VLAN setting

Internet VLAN ID : 500
IPTV VLAN ID : 600

Guys. I want to ask. Between AX20 and AX50, which one is much more better in terms of stability and speed for 100Mbps ? I'm thinking of changing my router since this AC1200 provided by TM keeps restarting on it's own and internet keeps dying even though I already make a good airflow from below. I heard that AX50 heats up pretty fast because of the Intel chipset. Anybody can confirm this or have any other suggestions ?

Both are great in terms of speed and stability. For me the AX20 is enough. AX50 has a overheating issue but not sure if this issue has been resolved or not on the firmware update

AX20 or AX73

Skip AX50 and AX10