For mr200 price range better go for Huawei e5186
Can get less than rm500 at taobao

I didn't see any links like that. This is not a MNP process, but an upgrade from prepaid to postpaid.

U will receive sms when your conversion completed

My prepaid SIM card is already Infinite 150. What I want now is to change the current SIM card that I cut manually to nano size with the new one that have arrived just yesterday.

Is supplementary lines can share the internet quota with principle line?

No.

Hi is dota 2 good with digi? So far i tried YES and it very stable but too expencive.

Please provide some input guys.

Currently a Digi user. Internet speed in my speed is roughly 10 ~ 15 (sometimes 20+) at off peaks, 5 ~ 10 when at peak hours. Is it still a good deal to invest 150 monthly along with an ~RM400 router?

Yes for many reasons.
- no contract
- can be your portable wifi
- worry free for quota

but huawei @ taobao without warranty right ?

coz in lazada with 2 years warranty mr200 is about 400+

This post has been edited by ahchun: Jun 3 2017, 01:53 PM

I'm considering digi infinite 150 for CCTV usage too cause there's no fibre optic coverages at my location. My plan is to insert the sim into a mifi or router then connect the cctvs to the network for remote viewing. So this is not possible using digi broadband?

Thanks in advance. Sorry I'm not familiar with broadband.

Just received my Huawei E5186s-22a. CA supported, phone works and working IPV6.

Will provide a firmware update guide if anyone is interested.

Still trying to get VoLTE to work. Currently, the modem will drop back to 3G when I use the phone


Attached thumbnail(s)

My firmware is 21.310 so should be newer than yours?
Nevertheless, please feel free to provide the guide.

For phone to use it on it, just plug and play?

That's normal right when receiving/making calls? Or it can stay on 4g

Any phone should be fine.

I am on a 310 firmware as well but the status page is bugged on my browser. Can you show your system information page here?

My current firmware have fully working IPV6 and it is able to display the signal information, LTE band and CA status.

This device should support VoLTE but it is not configured with Digi profile.

China warranty only, but usually huawei modems rarely break down, unless power surge by lightning which pretty voids the warranty anywhere

I'm using it my for my cctv using hikvision cameras, since I don't use the ezviz cloud I just use portforwarding on the router with vpn.
Technically with ipv6, you can connect to your cameras without portfowarding, still figuring out how to properly setup ipv6.


So once setup digi apn profile, can make calls/receive on VoLTe without it dropping to 3g? Even if the person calling don't have VoLTE enabled?

It is not APN, it is VoLTE profile while I couldn't get it to work as well.

Thanks. Sorry if off topic but may I know what's port forwarding? I need to change some settings before using instead of just turn on the modem and connect it with the cctv. I plan to use xiao fang cameras. 5 of them.

Time to bring back my cordless phone to use with this router.

I shared before as above. Only limited information.
So after updating firmware all information is available?

no volte for e5186..