hi, do you guys have any good xtreme music eq setting ? care to share ?

The setting depends on your speaker and your ears, you can't ask somebody to adjust the EQ for you without listening the speaker.

You need to adjust EQ by yourself depends on the speaker use....different speaker, different room condition need different EQ setting, so u shouldn't ask people give you the 'good' EQ setting to you...try messing the parameter by yourself...

One more thing, i suggest that you not to use X-FI EQ...instead you should use media player EQ...why i said so? Go HERE...

I got this after i switched to Audio Creation Mode i guess






This post has been edited by UNDERGROUND: Apr 27 2008, 09:17 AM

now the graph become balance in left/right channel...

That's more like it. Could you try 16-bit/44.1kHz?

That looks pretty good, but there is quite a lot of spikes on 100 to 1000Hz region. And there is a bump on 50Hz

My Prodigy HD2 exhibit the same problem on stereo crosstalk, anything above 2000Hz it started to rise up

I not so sure if my settings are all correct, i tried 44.1kHz as the master sampling rate just now and i get EXCELLENT for the frequency response (+0.01, -0.07)

Have you enabled 'Bit Matched playback' (I think that was it called)?

Nope, it wasn't selected at default.
Should I enable it ?

You should try it

yes, you should enable it...and turn off the EAX also...

Actually your graph were consider good already...the curve neat and even...

This post has been edited by coolkwc: Apr 27 2008, 12:06 PM

Tried Bit-Matched, not much differences though...

Yap...

I wonder if those spikes between 100 and 1000 Hz are caused by the cable or it's the XFi ?

Have you tested your card before the mod? I think its more related to card than the cable

Nope, i don't even know what is RMAA when i bought the card

If i chose "What You Hear" and run RMAA, the results came out perfect, what is the diff of choosing Line-In & What You Hear ?

'What u hear' take digital data before DAC, this test can show how the card perform internally....line-in was taken data from DAC+opamps and ADC again, to test how well the DAC and opamps were...