kekkeela baru nak offer its ok dah dapat pam lain setup pun takleh up gak gc block tak sampai sampai ni lama lagi kekekekeke

Pitty Me lalalalalalaalaal





where r u my gc block



err guys do you have any idea where to mount this rad


p/s
pssst psst i got Cooler Master Aquagate Liquid Cooling System ALC-U01 no more in used anyone intrested pm me ur offer

This post has been edited by sepulgilo: Feb 7 2008, 09:43 AM

Rilek laa.... aku nye pun x sampai lg.... After CNY sampai kot...

kekekke tu aar sabar baru la cun nanti hahahahhaaa u all tak gi visiting gong xi

@sepulgilo

Biar lmbt, asalkan safe ..... N aku rasa rad ko bleh mount kat luar or atas.... Klau xde space, mount outside je laa...

1 more thing, lupe nk ask..... ko mount CPU, Chipset n GPU block. Wat pump r u using???

This post has been edited by rozz_1291: Feb 7 2008, 11:08 PM

u can mount your radiator near your AC, or somewhere where theres constant air blowing.

pakai eheim 1048 bule ke?

if top can memang cun coz got two fan hole but have to mod (cut) the top panel so it can sit comfortably
nak cut and drill two holes for tubing kena la tunggu kedai member buka kkekekkeke kalo buat sendiri mau jadi tv

Buleh laa..... janji pump....Flow rate pun tinggi jugak.... Sama mcm MCP665.... Xleh pkai drill sendiri ke??? Tebuk je lubang... DIY senang citer....

Lol.... jauh lor..... Ko kt cheras... aku plak kt bngsr.... Aku no problem... Drill lubang, ade experience... Tp drill casing....

This post has been edited by rozz_1291: Feb 8 2008, 03:32 PM

barb barb barb malas tul nak pegi acehardware

My setup:



D-Tek Fuzion (w/ Quadcore nozzle kit), MCR220-QP, MCP655-B, MCRES Micro - pretty simple atm. Looking to add NB/SB wb in the future or get the 780i FTW edition lol.

Core 2 Extreme QX9650 @ 4ghz; 1.375v in bios, cpuz idle 1.360v, load 1.368v (780i vdroop pencil mod)
Core temp 0.96.1
Idle: 37,32,38,32;
Load (Prime95 small fft all 4 cores): 59,55,52,53

Just a quick setup, still need some work lol. Need to finalize the tygon hose length and mount the pump & res permanently. Chasis is TJ09BW w/ the MCR220-QP mounted in top 2x 120mm fan slot using Silverstone's Radsupport09 bracket.

This post has been edited by adliew: Feb 8 2008, 03:51 PM

nice and tidy setup bro and what a nice case dun wanna sale ka bro

the shorter inlet tube goes the better

This post has been edited by sepulgilo: Feb 8 2008, 03:54 PM

qx9650 in action........ temp seems very good wor.......looks like the nozzle kit really give some good results...

how about the temp of other components ??

got my new setup here with E2140

(sorry my hp pic...will take more pics with my digicam later)

got problems on the cpu temp...it went up from idle 29-31c --> 58-60c during prime...

running E2140 @ 1.39v (415*8 : 3320Mhz)

issit bcoz of the loop --> PUMP --> CPU --> NB --> Radiator?

however i got good results on NB @ 38c load compare to the stocks 49 ~~ 54c

my specs :

SWIFTECH APOGEE GT
SWIFTECH MCW30 NB WATER BLOCK
SWIFTECH DUAL 120 RADIATOR MCR220 (4 x 120mm Silent Silverstone Fans - Push Pull Setup)
NIROX P3800 1800 L/Hr

will change the fans to a higher cfm fans later today to see if any changes on the cpu temps

Of course la, ur NB contribute a lot of heat....

the NB is right after the CPU in the loop

r u sure bout that? P35 chip aint that hot...
In a WC setup, the stuff that produce alot of heat are GPU and CPU. The rest of it is minimal.
IMO, the reason for the high temp difference is mainly due to its pump. Flow rate is important.

yeah i suspect oso due to the pump...i guess the flow rate is a little bit high (1800 l/hr) thus not dissipating enough heat from the CPU Water block, as the water flow at higher rate...

guys, need some help with urs
for the coolant PC ICE & Fluid XP which 1 is better?

i would suggest PC ICE coolant...