Wow...new cpu block hah...try dtek fuzion la bro.

hehe,
this one is second hand unit,
cheap cheap price only, why not ?

Fuzion price can get this one 2units already lor

This post has been edited by ahpaul82: Dec 7 2007, 12:10 AM

After u use then sell to me bro.I also want it.
Nice item for your WC set.

a lil update on my CM690. With dual rad mounted on top.

Unfortunately, im very very short of tools and ill just make do with some china made RM5 soldering tool and melt down the plastic top panel. Got a dremel tool from moderno.. but malfunctioned = =

The cutting on the metal top part of my cm690 isnt well done due to not having proper tools... though it cant be seen when the top panel is covered so it isnt really an issue for now.


The whole top is fully solder/cut


Fits perfectly!!! what a relief after some rough measurement is done.


GPU waterblock is fitted and little heatsinks(mixed of zalmans/CM). Ready go to !!


Completed Internals
Yup... you didnt see wrong, the GPU short tubes are the gas tubes. DIdnt have enough clearflex for it, though i think the extra hard gas tubes actually serves its purpose well there.


Uv-fied/Bling-fied


Everything up and running ~


Overall Workstation view.

Expect some updates soon to fully touch up all the bad parts after my new hardwares arrives

hint hint ~ another tripple rad for extreme passive silent/performance

Wow .. nice one ...

Come come post a brighter and bigger photo ..

of course with some result as well....

You guys we're soooooo cooooool.

Darn it, i can't hold myself to build a water cooling system. but i dont have knowledge on building it. any advice for me here???

what is the minimum cost for a watercooling system?? is it comes in a package with pumps and all ect.?

yeah!! WC so damn cute.. and of course for high-end cooling... i also n00b about WC.. just study for the past 4-5 days... to me this tutorial the best...

http://www.xtremesystems.org/forums/showthread.php?t=54331

read it out and u can imagine how WC works.. about tubing, pump, radiator and so on.... but for me, read about WC isnt enough.. u need to feel it..buy it! and install it by urself... pergh!! damn so good...

about price, try this URL.. pick the items by urself...

http://forum.lowyat.net/index.php?showtopi...419&hl=Swiftech

This post has been edited by book8: Dec 9 2007, 06:22 PM

the URL you gave me is kinda expensive.... well, i have some item in my mind. what do you think of the item below?

ThermalTake:-
1. Aqua RX R2 UFO CPU Water Block CL-W0092
2. Aqua T.M.G 1 CL-W0072
3. Water Tank CL-W0009
4. P500 Pump CL-W0132
5. Water Tube Itube CL-W0055/9.5mm
6. Coolant 1000 CL-W0148

i dont know the quality and the price. who can help me in finding the price the those stuff??

If you work out the price, I won't be surprised that, with a bit of DIY and elbow grease, you can get a better setup for around the same price

ThermalTake:-
1. Aqua RX R2 UFO CPU Water Block CL-W0092
2. Aqua T.M.G 1 CL-W0072
3. Water Tank CL-W0009
4. P500 Pump CL-W0132
5. Water Tube Itube CL-W0055/9.5mm
6. Coolant 1000 CL-W0148

normally, how much would those stuff cost me around??

honestly, i also dont have any wc yet... from my experience in READING about wc, thermaltake and cooler master dint produce good quality of their wc... corsair, zalman, d-tek, thermochill, swiftech, cool-trek is an example of good wc products..

in my opinion, better u save/find more money to buy quality products cos ur playing electronic devices with liquid..

No Thermaltarik please.

no thermaltake... ahakz!!!

well, it's hard to find a good and cheap water cooler......

any recommandation? i have budget around Rm400 only....

my advise for you based on my own experience. Before my final setup, i was a Thermaltake Bigwater 735 user with dual TT Rad. Honestly speaking, despite performing not up to par, at least it is silent in a way, when rad is mounting externally, overall case temp is lowered since the heat from the proc is carried away externally unlike Air cooling, where air will most likely stays in the case before being carried away by your exhaust.

There are pro and cons, however, i never regret my purchase on Bigwater 735 as i learnt most of my WC lessons from there.

If you have a RM400 budget, id advise you to save up more and get a decent watercooling set.

My setup as of now -

Apogee GT = RM200
Swiftech MCW60-R = RM200
Cool-Trek DP1202 = RM235
MCRES Micro Reservoir = RM85 (Optional, you can replace this with a T joint)
Nirox P3800 (1500L/H) pump with brass barbs = RM45+24
Tubings (Clearflex) = RM50 (if you're tight on budget, go visit your hardware shop and look for those gas tubes, a good quality ones only cost you approx RM2 per feet)
Coolant + Distileld water (1Litre) = RM20+10
Miscelaneous = RM10 (zipties, clamps, etc)

Total RM879

Performance difference vs bigwater? Significant!!

Im totally satisfied even if it cost me that much. Again, i wont hessitate to invest in a proper cooling system, it is still useable on upgrades and wont go to waste.. not so soon lol.

Remember, its about performance, not the "cool" factor.

thermochill 120.1 available? cos i think i wont cut my future casing.. sayang lor...
just thinking to hanging 120mm rad at the back side...

where can i get those water cooler props? is it avaiable in Low yat Plaza?

u can get it from some forummer name METALZONE..

or forummer name moderno or go to this site...

http://www.modernopc.com/store/index.php?m...51782302e52cbf0

This post has been edited by book8: Dec 10 2007, 12:53 AM

it is indeed up to you whoever u wanna buy from. But 1 piece of advise, choose a seller where the location is nearer to you. If you're new to WC, im sure any of the 2 mentioned friendly seller are able to provide guidance for you