dun change to nirox pump, stick with ur gigabyte pump, go for the mcp-655, nirox are almost same with stock gigabyte pump and easily get clicking sound, i have been using nirox pump, both got clicking sound case, ended up using 2nd hand mcp-650.

@BstDude
u using elbow fittings on ur loop will hurt the performance of ur water cooling, btw nice setup u have, what are the loop sequence u running, pump -> radiator -> ??

This post has been edited by lichyetan: Nov 11 2007, 03:53 PM

no la... wat i mean here is when gigabyte pump is dead... then ill find another pump...

muhahah ,, that would take u sometimes in the coming year ...

probably closer, who knows how good each pump could last ...

Anyway, I think u could thought off rather spending a bit here and there..

Just safe a large some of money and buy in once.. coz water block doesn't get outdated easily, especially for those that are good one.

Can last you two years for sure.. performance also difficult to left behind by new release in large margin ... usually about 2 to 3 degrees ..

Which is why cascade and phase change come into play .. but too hassle and kill electricity higher.

Beside invest good in once and u would actually see the difference of performance clearly.

hahah ... just suggestion only, still down to your desire and decision as well as budget ...

btw change ur signature lah .. since u have got the lovely wc kit .. time to show off a bit ...don't be shy

don worry many of us have bought and hated these WC units
its part of the experience and journey of your cooling adventure... so just next time do abit more reasearch and dun trust reviews. scan the forums for user feebback which are usually right.. and forumers are never afaraid to critisize .. unlike most reviewers are pressured not to report faults, or are under contract... they ont want to piss the companies off coz tehy want future review units...

lol... i just loved wc because it is adventures...

who knows the pump, tubing will damage or dead...

thats the adventure and experience who has wc....

@BstDude
u using elbow fittings on ur loop will hurt the performance of ur water cooling, btw nice setup u have, what are the loop sequence u running, pump -> radiator -> ??

[/quote]

pump > rad >2x120 rad >cpu block>chipset/vga >res

my temp when idle and default clock....




This post has been edited by amd_hardcore: Nov 11 2007, 11:53 PM

That's nice to achieved 21c only ... but how could it be possible unless u are staying in a room with ambient temperature that as low as 20c only ..

hmm impressive result though ... any load temperature to show ..

[quote=bst dude,Nov 11 2007, 08:02 PM]
@BstDude
u using elbow fittings on ur loop will hurt the performance of ur water cooling, btw nice setup u have, what are the loop sequence u running, pump -> radiator -> ??

[/quote]

pump > rad >2x120 rad >cpu block>chipset/vga >res

[/quote]

i also using the sequence same with ur, but the cpu follow by vga then only chipset. part u want to cool more should be arrange after radiator.

[quote=Doom,Nov 12 2007, 02:36 AM]
That's nice to achieved 21c only ... but how could it be possible unless u are staying in a room with ambient temperature that as low as 20c only ..

hmm impressive result though ... any load temperature to show ..

[/quote]

ya, interest on ur load temp

ya im running it in air cond...

but aircond temp is 24'c...

load temp wait...

hmmm... how come ur idle temp is lower than the ambient??? if lower than ambient then isn't it there'll be condensation occurs???

i plan to wc my maximus...can someone recommand me good wc kits? eg pump or etc...btw is there any place can get wc thing like those swiftech in penang ar?

i have extra new WC part, if u interest PM me. i also stay in penang

Who can recommend me a good GPU water block> ?

hehhe either D-Tek Fuzion GPU or Swiftech MCW60 ... those are recommended if covering the full card isn't needed. Especially D-Tek Fuzion would be a nice one... I would be getting it soon with the CPU block as well ..

If u prefer full cover GPU block than Danger Den and EK has some good offers .. but it's just hard to get one in Malaysia ...

try go for MCW-60, the d-tek gpu block is too restrictive, but their fuzion cpu block are one of the most high flow less restrictive block in the market.

This post has been edited by lichyetan: Nov 19 2007, 12:06 AM

Ya.. those Dtek GPU block is not really recommended due to its design but no deny those UNI Sink is sexy.. hehe..

Swiftech WC Setup on Silverstone TJ07 :

Swiftech Apogee GT
Swiftech MCW-30 Chipset Water Block
Swiftech MCR220 Twin Radiator
Swiftech MCRES Reservoir
Masterklear 1/2" Tubing
Nirox Pump with brass barbs

Wow.. nice how much does all of those cost?...

just get mcw60 ( bare kit ) with g80 mouting accescorie with the Dtek uni sink.. beats alot of full cover blocks.. but also u dunt lose ur upgrade path.. u just have to buy a new uni sinki when u upgrade.. no need thro away a full cover block