Firmware changes since 3.9.42:

[UAPG3] Fix bandsteering when using channel 144.
[UAPG3] Fix IP endianness issue.
[UAPG3] Fix DPI blocking support.
[UAPG2/G3] Add advanced guest isolation support.*
[UAPG2/G3] Add simple DNS tracking for client STAs to syslog.
[UAPG2/G3] Fix a leak which may cause provisioning/upgrade issues (`Timeout waiting for OL vap X to stop` in syslog).
[UAPG2/G3] Fix 802.1X identity so it works when Fast Roaming is enabled.
[XG/BaseStationXG] Add multi interface uplink support.
[BaseStationXG] Enable OLED display support.
[nanoHD/IW-HD] Add 802.11k support.
[nanoHD/IW-HD] Add 802.11r support.
[nanoHD/IW-HD] Add support for minimum PHY rate control.
[nanoHD/IW-HD] Improve wireless uplink stability.
[nanoHD/IW-HD] Update 802.11k scan policy.
[nanoHD/IW-HD] Enhance bandsteering and set daemon to 802.11v BSS Transition Management (BTM) only mode.
[nanoHD/IW-HD] Fix client STA can't connect after WLAN schedule executed (reported HERE).
[nanoHD/IW-HD] Fix bug which would cause default SSIDs to broadcast in some cases.
[nanoHD/IW-HD] Stability and performance improvements.
[IW-HD] Add DFS support.
[IW-HD] Add wired 802.1X support.*
[IW-HD] Fix an issue with client STA roaming.
[IW-HD] Fix scheduling while atomic bug which caused the management daemon to crash (reported HERE).
[UAP] Add loop detection to wireless uplink.
[UAP] Fix a bug in RADIUS MAC Auth provisioning.
[UAP] Fix throughput drop (reported HERE).
[UAP] Fix bug with rate limiting support (reported HERE).
[UAP] Fix a bug which allowed fast roaming to be enabled on SSIDs that are either open or using WEP.
[UAP] Reduce uplink-monitor log spam.
[USW] Fix false RX Fault errors showing on some UF-RJ45-1G modules.
[USW] Fix SNMPv3 fast-apply fail due to special characters in password.
[USW] Fix switch LAG link failed bug.
[USW] Fix a memory leak.
[USW] Fix false alerts when fan running at low duty.
[USW] Fix SSDP packet forwarding issue.
[USW] Fix false overheating alerts.
[USW] Fix LAG port LED off issue.
[HW] Improve firmware update error code reporting.
[HW] Fix device inform issue with DNS resolving to wildcard IPs.
[HW] Miscellaneous bug fixes and improvements.

yes, but more towards cybersecurity things... pentest...

Tbh i havent look into that bro. Maybe i can learn smthg frm u

This post has been edited by wanttotree: Sep 28 2018, 03:32 PM

O hoho vlan and radius madness. Lots of new enterprise users mistakenly leave snmp communities to the default and enabled too haha

This post has been edited by miloaisdino: Sep 28 2018, 04:47 PM

yeah man... but it will be a big thing soon... but switching and routing too gonna expanding as well.. oh ya... btw, vpn in usg.. only allow IP? any chances it can be use ddns?

yup correct. none bothering upgrading on patching their system anyway.. and see if anything by default...

Oh yes i have the unifi olt technician manual someone else here found lying on the internet b4. Quite a few potential default passwords in the document

This post has been edited by miloaisdino: Sep 28 2018, 09:34 PM

im pretty sure i interpreted that differently..

really... document.. means it was documented by manufactured or by whom

I would like to check those, can share?

Pmed

thanks man... saw it.. it was.. lol...this suppose not release to public right? or it can? im quite surprise.. it was so detail

I have no idea. Some kind soul found it on scribd and posted it on the unifi thread. I told him to quickly remove in case tm sees it lol.

But the smnp communities revealed tho.... that might reveal more shit

The main thing that made me angry was the fact that the olt had a 'HSI' profile which was basically internet only unifi service without vlan...

This post has been edited by miloaisdino: Sep 29 2018, 02:53 PM

yes.... and TIME able to do it without vlan.. lol.... smnp seems sensitive, but i have no idea why no people bother bout it.. unless they pretty confident bout their things.. and infra, still... it should not be taken lightly..

Anyone have WiFi disconnect issue after upgrade to latest firmware. I notice that I’m not alone in ubnt forum. Going to downgrade back to .42 firmware tonight.

any link of the forum?
Im using UAP AC lite in my office. no issue so far.. latest firmware.

your AP model?

https://community.ubnt.com/t5/UniFi-Wireles.../highlight/true

I have nanoHD and ac Pro. I notice this issue on nanoHD.

nanoHD and Ac HD it seems.... old issue appeared...

Downgrade both back to previous firmware. I don’t have issue before upgrade.

Anyone is using USG-Pro4 with UniFi Turbo or TIME in 500Mbps?
I'm thinking to replace my Mikrotik to that, so i can have the DPI feature.
But afraid the USG-Pro4 is unable to take the 500Mbps load.

Anyone can share the experience?

Usg pro can handle gigabit internet and dpi with breeze. Even the smaller usg can do similarly

This post has been edited by wanttotree: Oct 21 2018, 08:42 AM

it can handle up to 4Gbps.. should not be a problem