ya, quite sure according to my understanding, correct me if i'm wrong.

hmm nope..to clear the CMOS just take out the 5v battery right? lolz

you can either take out the battery for a while or use the jumper to reset it.

@pengster
what version of your bios? maybe update it to later version can help solve the problem. Give it a try.

This post has been edited by kabukiawie: Jan 17 2007, 11:36 PM

http://developer.intel.com/design/motherbd/software/dcc/

It does work

Note : Lowest support is 865 PERL board

This post has been edited by shinjite: Jan 17 2007, 11:37 PM

Note : Lowest support is 865 PERL board :)This program only allows you to overclock 3% which you don't feel any difference on it after o/c.

so that program enable oc in window?? but 3% is consider same as no o at all. Never used before as my mobo is not supported.

Better get other mobo if really want to oc. s478 mobo is almost like antique now, really hard to find.

The program is useless in Intel 865PERL. Last time i owned one,no matter after or before o/c,the performance is still almost the same.

haha...i also oc my mobo before using old version clockgen.using 2.8E can go up untill 3.2...the performance increased...

i have use clockgen before but never success after few try, then give up and use manual BIOS oc which is easier to set.

Tough luck for you guys then
Some guys OCed their Dell to 3.5Ghz without problems....

Can't believe it.I thought those Dell dekstops cannot be o/c at all. Right now i am using a Dell desktop in my office,2.6Ghz HT system.Don't know got chance to o/c or not...

oc till 3.5GHz is sweet, i have worry on the agp/pci speed that rise along oc will slowly kill cards attached.

mine's version 1009 if im not mistaken..tried to update the bios thru asus update utility but cant find the file in the server

Yup thats just the only problem

@kabukiawie
sorry my bios version is 8.00.09 is it safe to download the newer bios [if any] and just install it?


after trying umpteen times i finally got my pc to boot up all settings at default and now running DC with 2 of my KVR400 at 166mhz 5:4 divider now i wonder if i can push it back up to 2.7ghz without any problems


edit : but i love my temps currently - 33c idle

edit 2 : i've already downloaded the beta bios v1010..should i use it?hmm abit afraid la cuz its beta

This post has been edited by pengster: Jan 19 2007, 09:59 PM

i not facing any issue on v1009 beta. 33c is nice temp. your kvr running at 166? are you sure it is 5:4? easiest way to check is by using cpuz.

i left default is running 4:5 = cpu(166):ram(200), now running 1:1 cpu(166):ram(166). unless i get 800fsb proc, if not it is no chance for me to get 5:4, 3:2 divider.

u can fix the agp/pci using clockgen after u oc ur proc..

you mean using clockgen the agp/pci can be lock?? i go download and try.

also socket 478.. but celeron wor... can i join?