where to find the SL code?

omg i am so stupid to think that it was the rams that was giving me the headaches

the actual problem is my PSU cannot handle the requirements of the 6800s like my 6800GS now just took out my 6800GS n replaced with my old 9550 n worked fine till now.

ps.before this i cant even boot up my pc after last night.last night used the pc for 7hours and no problems but around 10pm came out the BSOD.from then till just now could not boot up.

i see, so its your cap ayam psu not enough juice. if you dare to try, modify 1 of the old psu and feed it only to your 6800gs. haha.....just a lame suggestion. I try that before with old 230w old psu to power up my 9800pro and 2 case fans, works fine for about a year.

now hows the oc after switch the gc? ever try to push higher?

argh.i h-a-t-e cheap psus cause me so much headache trying to figure out what was the damn problem.LOL or maybe im just a n00b

lolz im still a kid lah duno how to mod a psu..and my other old psu also no switch to turn it on/off

nahh havent tried to push it higher yet.since its a cap ayam psu 2.7ghz is good enough.when i get a better psu or my fma back then i'll try for 3Ghz.dang cant play all those graphic intense games no more

haha, easy 1, just a simple mode to bypass1 of the wire. then when the psu power on the psu is on. i know it is not recommended to do so. haha..... but to me i think its better than 2 cap ayam psu share the workload instead of 1 psu to handle all workload. At least cap ayam psu can handle smaller workload. no offence

i tried this, its a simple mod. have fun.

Click Me

Its written in your Intel box and the processor itself

This post has been edited by shinjite: Jan 15 2007, 08:49 PM

oh okay.will check when i change my HSF later this month

found out that my Turion64 1.8Ghz with 110mb available real memory is the same with my 2.7ghz P4 with 700mb of available real memory in SuperPI both also achieved 57s

Hahaha....AMD's architecture, their IPC count is way higher than Intel's per cycle, if compare same clock speed, Intel P4 kan toi adi.....cannot be compared 1

Thats why last time they say AMD's 2 Ghz = Intel's 3Ghz and above

This post has been edited by shinjite: Jan 17 2007, 01:14 AM

haha...pengster, wanna sell ur 6800gs to me??hehe...

anyway, i just using my P4 3.2E in default clock.using intel board, so the overclockability is almost 0%..

You can use SoftFSB

This post has been edited by shinjite: Jan 17 2007, 02:46 AM

ooo..can use thi software to oc my ancient rig arr??will try it later...

edit:looks like i can't find softfsb which support my intel865perl....
anyone wanna sell their overclockable mobo to me??

This post has been edited by rainingzero: Jan 17 2007, 10:05 AM

You can try to google out for clockgen too

I don't think this mobo can do any overclocking on it. Not even the softfsb or clockgen unless you change the motherboard.

Ya, i agree too.
If ur mobo don't have OC features, then no matter wat softFSB u use, u still cant OC it unless u change the mobo.

have u tried using clockgen??

http://www.cpuid.com/clockgen.php

i thought software like clockgen is the option for those non ocable mobo to oc. but even you can oc with non ocable mobo, the clock for pci and agp will be high and it may kill those cards due to the lack of agp/pci lock.

Are you sure?

sienz.now duno whats wrong with my pc again.cant boot up at 2.7ghz so now back on stock 2.4ghz.and without 1 stick of kvr.

i think i'll lay off till my fma returns

One of your RAM got faulty?Hehe,if dun run on dual channel also cannot boot up?

lol cant be..i took out my old(er) ram which was working fine before..yeah forgotten to say that i wasnt on dual channel with 1.5gb of ram.now with 1gb also not dual channel

so now i using slot 1 and 4 with 2x KVR400.non DC 1:1 divider.p4 at stock 2.4ghz.

You got try to clear the CMOS and put back 2 sticks of RAM? Might be CMOS corrupted.