Intel Core i5 6400 - RM 775
Gigabyte B150M-D3H (D4) - RM 419
GSKill 8GB DDR4 2133MHz Value RAM - RM 169
Palit GTX1060 6GB GDDR5 Dual Fan - RM 1249
Samsung 750 EVO 120GB SSD - RM 229
WD Blue 1TB HDD - RM 219
FSP Hexa+ 550W - RM 199
Sharkoon T3-W - RM 199
Acer R241Y IPS - RM 649

Total: RM 4107 (Idealtech price inclusive of GST)

Yes still need few months... damn. I shall wait if i want AMD then.. sad

Thanks for the help.

hello all. I need a suggestion for a decent mobo,cpu,RAM & casing based on the following spec:-

[Budget] Around RM1600

[Purpose] 24/7 server+ virtualized gaming PC.

[Hardwares that will be re-use] PSU 520W.HD7750 GPU,HDD,SSD,m&k,monitor.

[Games & softwares ] unraid server + DOTA2 + Skyrim(sometimes)

[Personal preferences] if possible,mobo (DDR4) n casing can support 6xSATA3 3.5"HDD .

Thanks.

Hi, need recommendation with budget of RM5000 excluding monitor

[Budget] Around RM5000 to RM5050

[Purpose] Gaming mostly and work

[Hardwares that will be re-use] Optical Drive

[Monitor resolution] 1440p wQHD, 75 Hz

[Games & softwares that use frequently] FFXIV, steam games, latest games

[Personal preferences] Palit GPU any good?? Uncertain on GTX 1060 is sufficient on 1440p above 60 FPS or not else 1070

[Location] DotaTech, ETech, IdealTech

Thanks and cheers

Intel Core i5 6500 - RM 835
Asus H110M-K - RM 274
Kingston 16GB DDR4 2133MHz Value RAM - RM 290
CM K282 - RM 193

Total: RM 1592 (ETech price inclusive of GST)

If you run triple A titles on 1440p max settings, then GTX1070 and above is more preferred. Palit GPU is ok, price is cheap but not as premium as other brands like Asus, Gigabyte, MSI etc. You need to fork out extra few hundreds for those brands and in return, you get little to zero performance improvement (in terms of FPS) which is not budget friendly at all.

Intel Core i7 6700 - RM 1305
Gigabyte B150M-D3H (D4) - RM 379
Kingston 16GB (8GB x 2) DDR4 2133MHz Value RAM - RM 290
Palit GTX1070 8GB GDDR5 Jetstream - RM 1999
Kingston SSDNow UV400 240GB SSD - RM 255
WD Blue 1TB HDD - RM 209
Superflower Leadex Gold 550W - RM 409
Tecware Alpha - RM 199

Total: RM 5045 (ETech price inclusive of GST)

Build I made from idealtech

INTEL CORE I5 6600K -RM 1065
CRYORIG H7 (145MM) -RM 189
ASROCK Z170 Pro 4 -RM 548
G.SKILL AEGIS Series 8GB DDR4 2133mhz -RM 169
PALIT GTX 1070 GameRock -RM 2099
Seasonic S12II-620 EVO -RM 299
Sharkoon DG7000 (RED) -RM 269
SAMSUNG 750 EVO 120GB -RM 229
WD 1TB Caviar Blue -RM219

Total RM4995

idealtech.com.my/store/builder/show.php?serial=0OB8NACR

Is there any parts I should swap as long as it doesnt exceed rm5k.

This post has been edited by sakrayguy: Aug 2 2016, 12:18 PM

Guys can recommend me mitx build for my office. And need wifi

Monitor, mouse keyboard i already have, so only need the cpu.

Only for work usage, youtube, movies. No gaming. Thx guys

This post has been edited by GroundMan: Aug 2 2016, 01:16 PM

Alternative build would be a locked i7 rig which provides extra threads compared to 6600K.

If your ambient temperature is high and you do a lot of heavy OC, I suggest you to get a better cooler, same goes to RAM, get a high speed RAM when you have a Z170 mobo, Skylake CPU does benefit from high speed RAM.

Intel Core i3 6100 - RM 479
ASRock H110M-ITX - RM 315
Kingston 8GB DDR4 2133MHz Value RAM - RM 147
WD Blue 1TB HDD - RM 209
CM Elite Power 350W - RM 126
CM Elite 110 - RM 159

Total: RM 1435 (ETech price inclusive of GST)

WiFi adapter:
1. TP-LINK TL-WN881ND PCIe WiFi 2.4G - RM 65
2. TP-LINK TL-WN722N USB WiFi 2.4G - RM 45
3. TP-LINK TL-WDN3200 USB WiFi 5G - RM 63

Or get a mobo with on-board WiFi card included like Gigabyte H170N-WiFi (RM 516).

This post has been edited by terence_nwb: Aug 2 2016, 02:20 PM

Alo!

Can anyone quote me a rig upgrade for RM2k?

What I only need:

CPU (not planning to OC), Mobo, RAM and a bit for casing if possible
Rest of the hardware salvaging from old rig (hdd,psu n gpu)

Usage: Gaming & Photo rendering.

Thanks.

thanks bro, is there any other mobo to recommend that has built in wifi? shops here dont carry that gigabyte sadly..

Hi all, this is a build I'm planning for a small corner of my study desk. I'm building this with the challenge to put air-cooling into a Corsair 250D.

Usage: Steam (AAA titles), Movies, Surfing, Music
Overclocking: No
Preferences: Casing must be 250D, must be air-cooling

Not too worried about the price since I'll be hunting after that. Rather I would appreciate feedback if I've overlooked any parts that are clearly bottlenecking/incompatible:

PSU M12II-520 EVO
Casing Obsidian Series™ 250D Mini ITX PC Case, front fan replace with Spectre Black 200mm
Processor I7 6700
HSF Hyper 103 - Can fit in after i remove the ODD bracket from the 250D
Mobo MSI B150I GAMING PRO AC - WIFI/BT4.0 included
RAM HyperX Fury DDR4 8GB 2133Mhz x 2
GPU PALIT GeForce® GTX 1070 Dual Fan
SSD Sandisk Ultra II - 480Gb

I realise that MSI-B150i comes with either AC or not (the wifi+BT module). Will it be better for me to opt for the AC, or just seperately get a USB dongle for the purpose?

I'll worry about the KB+M, monitor and speakers later on.

Thanks sifu2 sekalian

Since you didn't mention your case form factor and PSU length so I am going to reuse the current case and assume your case is ATX form factor which supports ATX mobo.

Intel Core i7 6700 - RM 1305
Gigabyte H170-HD3 (D4) - RM 446
Kingston 16GB (8GB x 2) DDR4 2133MHz Value RAM - RM 290

Total: RM 2041 (ETech price inclusive of GST)

ASRock H170M-ITX/ac, MSI H110I PRO AC

I will go for on-board WiFi card instead of dongle anytime now, cheap dongle overheats too fast and might face frequent disconnection when it is hot, speaking from my own experience

Ok, that helps alot. Thanks!

Good day guys!

I'm looking to rebuild my rig since this one is dying off slowly. Prep RM2000 for whole CPU.

Parts I don't need to rebuild: DVD room, HDD, GC

Usage: Illustrator, gaming, youtube, watch movie.

Prefer: High power PSU as I am planning to plug in 2TB. Looking for i7 build. i5 is budget is too constrain.

Remark: I am in dilemma to whether reuse my CM690. It's bulky for mid tower and I am looking for other alternative; something small and lightweight.

Hi I need FIVE computers for my office and I have gotten the below quotation:-

Type A (RM1,330.00)

HP Pavillion 251-A150D Desktop PC; P/N N4R23AA
- intel pentium J2900 2.41 ghz processor
-2gb ddr3- 1600mhz ram
- 500gb sata harddisk
- ultra slim tray super multi dvdrw ODD
- hp 7 in 1 card reader
- on board ethernet support
- hp wlan 802.11 mini card
- Windows 10
- HP keyboard and mouse

Type B (RM1,200.00)

Clone system
- intel pentium G4400 2.7ghz processor
- asus intel H110M- D3 w/vga/snd/lan/matx motherboard
- kingston 4gb ddr3 1600 mhz ram
- 500gb sata 7200rpm hard disk
- asus 24x dvd-rw burner
- powerlogic 450W atx casing
- usb keyboard & mouse


My budget is around RM1,300 for the CPU, need something more future-proof too, can include SSD ? DDR4 rams necessary ? Which one to pick ? Need to modify any of the above specs ?


Any suggestions would be helpful, Thanks!

i7 6700 costs 1.3k and you left 700 for the rest of the part only, so i5 is more budget friendly in your case.

What's your current GPU model?

2TB HDD doesn't require super high power PSU, just treat it as normal HDD.

First option is out if your workload consists of excel/word/PPT processing, J2900 is weak and the 2GB RAM can barely do anything now.

The second option is better with latest Skylake Pentium CPU but you need to get Windows license key separately as it is a custom build PC.

Intel Core i3 6100 - RM 479
Asus H110M-K - RM 274
Kingston 8GB DDR4 2133MHz Value RAM - RM 147
WD Blue 1TB HDD - RM 209
Cheap OEM case + PSU ~ RM 100
Logitech MK200 Wired Combo - RM 65

Total: RM 1274 (ETech price inclusive of GST)

If you want a 120GB SSD to be included, you can either downgrade the i3 to Pentium or 8GB to 4GB RAM, top up a bit if necessary.