lol TQTQ now is batter full load 45C and idle 40C
but.... no oc wo..... really such a high temp?
my fren use Bigtyphoon 120VX and E6600 which hav full load 38C
zz tat geng le!! y ultra 120 cant?

i wonder y u guys here complain abt the temperature when its 40-50celcius...

my 1 more scarry le... wanna ask y oso... im using intel mobo with pentium-D 3.40ghz. no OC. wif a cooler master heatsink + very big wind fan(bought from overclocker united or donno wat overclock shop). and my temperature still 60-65 at bios... but if i go in windows and install the intel utilitize it oni show 50+ celcius...

i want faint d

Since u didn't attach it with a fan, so the temperature is totally normal.
Go buy a high RPM fan and attach on it, then u will able to see the different.

mind telling which CM HSF u using? anyway...Pentium D is hot de lo...if u are using low end 3rd party cooler...it won't cool down much lo...just my opinion...correct me if I am wrong...

cant remember the model d... bought the CM heatsink + fan but after tat i change the fan d... so now i oso donno wat izzit d... but price shud b around 120-150 ... shud b a louzy 1... if not i oso wont change the fan le... haha

lol wat fan recommanded for Ultra 120? wan look nice Blink blink and not so bad performence

Hi guys,

I have a P4 3.0 with stock fan and heatsink. My idle temp will be around +-53C and max around 67C. I know it's hot, but i wanna know, as i switch on my pc, i found out that the temp is always around +-60C, then slowly decrease to +-53C when idle. Is this normal?

Get Vizo if u want bling bling with performance ..

it's a bit noisy but definitely bearable.. if it's plugged to mobo fan header the fan speed could be reduced for decent air flow and lower noise . .. or can get some Aerocool Aluminum fan that come with LED ... it should be a nice one as well .. but he weight of the fan must be bear in mind....

hmm .probably time to change the thermal paste ...

ok i will go check for vizo tis week end

im using XV HD2600xt and temp is quite high after gaming for about 1 or 2 hours and since i never shut down pc...its pretty high...about 60deg during gaming like fifa/rainbowsix vegas...

is there any 3rd party cooling solutions? accelero s1 does not support but i see goldfries manage to fit in....but it is not reccomended la...

so anyone with any idea on this matter? please help...

That's why never combine a download machine and gaming machine ..

You would be worrying about more than u could...

currently there's really not much of choice for ATI 2K series...

Either you could grab a Thermalright HR-03 Rev A or wait further...

I didn't wait for any of these so just water cooling all the way ...

fully satisfied with the performance..

Hello,

My idle cpu temperature is 28 to 33 degrees, however when it is on load, the temperature can be quite scary it could sky rocket to about 90 degrees, it would firstly be in the region of 55 degrees but after a while it would increase dramatically, 2-3 degrees at a time to about 90 degrees after about 2 minutes of orthos..

I took out the cpu cooler and put it back in again ensuring everything's in the right place but the problem still persists..
I took my whole mobo and clean everything, the chipset heatsinks and all but it only got a little better, now after 6 minutes of orthos only will the temperature fly sky high..

I tried with both overclocking and non-overclocking of the processor, but the problem is still the same..
Could anyway kindly help me with my problem?

Anyways I'm using artic cooling freezer 64 with the mx1 thermal paste that came with it..

What casing u have? do u have intake and exhaust fan in ur casing? if no exhaust fan...the heat might trap inside the casing and ur cooler will use back the hot air to "cool" ur processor...so the temp will getting higher and higher...that is just my assumption for your case...

A picture speaks thousands of word .. .

just show us ur setup, it would helps a lot ...

http://img145.imageshack.us/img145/3573/photo0013pk7.jpg

one fan as intake at the hd area, another 1 at side panel..
Fan at the back as exhaust..

This post has been edited by eternity86: Oct 18 2007, 06:21 PM

you have a great ventilation case .. the only reason that ur CPU could be over heating should be ur cooler mounting ...

if possible try ur stock cooler on and see the difference ... if the stock cooler works better during load compared to ur AC freezer ...

than u should have ur answer .. if not than probably could describe the situation a bit further for reference.

It doesn't work, it is worse than the artic cooling..
Is there a possibility that the mobo may be damaged? i've just changed casings, and the problem exist since i've changed to this casing..
I'm sure that its not the casing's fault as this has a much better airflow than my previous one...

probably u should try ur cpu on other mobo with the freezer pro then ..

or if u try to touch the fins during the load condition see whether it's really as hot as what the temperature reported .. .
..
but be careful when doing it ..

ok, will try with another mobo tmr..

I've touched it, it is hot..
The heatpipe running on the mobo is even hotter, if i'm not mistaken, that is the nvidia nforce chip...

Just wondering ...

My C2D E6550 Running 2.8ghz on prime test is 58c is dat normal??