Landmark mostly sell coolermaster stuff. haven got any chance to see other cooling stuff yet. may i know where is ckhoong or robyncom ??

ckhoong try looking for him at garagesale(psu /casing thread) and robyncom at imbi plaza KL

overclock my E6600 at 3.4K mhz only but my idle temp is 56-62 celcius using core temp 0.94

when strees with orthos about 1 minute then temp is +- 80C

is that ok? i feel not ok with this temp

btw already using zalman 9500

two words BLOODY HOT!!!!

maybe u put too much TIM..try reapplying it check whether u installed the cooler properly

then again maybe the zalman isnt good enuff to cool down ur OC-ed proc temp

This post has been edited by styloe: Sep 17 2007, 12:55 AM

I saw other people not that hot ... really weird... i think i already installed the cooler properly...

using 1.4V
378*8 only now
running normal application... temp @ 58C...
sifuu.... help!!!

what TIM mean???

TIM means thermal paste.u used the TIM bundle with ur cooler?maybe ur casing has poor airflow.this is just a guess.

yes i'm using bundle with my cooler... may be need to try use arctic

air flow no problem i guess.... got 12cm blow out and blow in fan

This post has been edited by shoden: Sep 17 2007, 11:55 AM

Sifu here, wanna ask something.

Previously i used stock cooler with stock TIM
3.01GHz at 1.875Vcore, idle at 50C, load at 58C

now my pc is running at 3.15GHz as said in my siggy, using mx-2 TIM.
idle temperature around 42C, load can go 50C
Vcore is 1.225

seems like not so worthwhile lar.. what you guys think?

mine use e6420.. using zalman 9700nt.. and super thermal grease from zalman also..

idle is 43 C..

is it normal? i expect the temp is lower than 43 C.. in that case.. do i need to change the TIM?

if u change the TIM also not much diff in idle unless in LOAD.i wonder y ppl are to stressing on idle temp.its LOAD that matters ere coz overheating will cause ur proc to go to HEAVEN maa

try artic mx2 TIM maybe help to lower 2-3c if lucky but it needs to be cooked for a while to see its effectiveness

hello,

would like to ask what is the normal temperature of MotherBoard?
im using ASUS PROBE and it shows 55 degree C !!!

im using ASUS P5N-E SLI

THANKS!

I think its normal de.Mobo recive the heat from proc,gc,hdd and then combine become like yours or even higher.

its normal if u OCed ur proc.the NB chipset also will get hotter.maybe u can cabbie tie a fan to the heatsink for simple and cheap solution.OR u can get urself a 3rd party cooler for ur NB.maybe HR 05 or NOCTUA nc u6.

Nobody answered my question yet.. huhu..

Stock cooler with stock Tim, Big Typ with MX-2, both also have 8C difference idle and load.. macam tak puas larr..

haa didnt notice.ok for sayla..if u change to 3rd party cooler of coz u wanna see a good result since ur forking some money for the item rite.ok here goes basically 3rd party cooler performs @ shows their potential mostly on LOAD temperature on idle maybe 2-3c than stok cooler.

List ur temperature like this:

stok cooler

IDLE temp ??c LOAD temp ??c

TTBT + MX-2

IDLE temp ??c LOAD temp ??c

focus on the LOAD temperature.see any big diff?

This post has been edited by styloe: Sep 20 2007, 01:24 AM

stock cooler

IDLE temp 50c LOAD temp 58c
Vc : 1.1875 FSB: 430MHz

TTBT + MX-2

IDLE temp 43c LOAD temp 51c
Vc : 1.225 FSB : 450MHz

not much difference ler... so sad...

This post has been edited by rockmaniac85: Sep 20 2007, 10:15 PM

maybe the TIM havent really2 cooked yet give it a few more days or ur room is a bloody sauna

to 7c is good enuf since u OCed refering to u siggy

jsut saw this thread..sorry i post it HERE earlier...
is there any heat issue with E6600 ES? or i did not install properly the HSF?
i tried set to default..still the same..but check in bios the temp is 4XºC only..TAT shows nearly 80ºC!!!

hahha .. most likely is ur mobo sensor that report the wrong value..

I once was DS3 user as well .. this mobo is good in every sense apart from temperature report .... not accurate..

are u sure? alot ppl telling me is the ES bug..and u tell me is mobo sensor..hhhmm...which one to believe