If i am not wrong, mobo bend is a problem that occurs when you have a bad HSF mounting and the HSF being too heavy, causing the mobo to bend. I have this problem last time even on my P4 stock HSF whereby the mounting is too tight causing the mobo to bend abit..

one noob question to ask

how does this compare with TTB TVX??

Oh, I don't use core center. Like you describe, I had similar problems.

I use speedfan to control my HSF. Try speedfan. It allows you to set your own customized speed for the fan depending on the CPU temperature.

The other app to control the HSF is MBM (motherboard monitor). I haven't use that before so dunno whether it is better.....

Will update you soon... Still at hometown

To ppl that pm me for refund, I will arrange it as soon as possible. Sry

both are good..but i would take this..mounting it its easy n its very silent n still cools very well

From what I see, i think there is some air flow problem with your chasis. Probably re adjust your wires and change your intake fan to more powerful one. Probably ur current intake fan not strong to push enough cool air into your chasis.

Exactly... Correct.

Thanks for your help

Errr.... If you ask me, I do think Noctua will perform much better than TTBT VX. Probably you can get more info about that in Cooling and Modding THread.

---

Added on May 2, 2007, 4:59 pmall refund requested had been done. Pls check your bank account.

thanks ya

This post has been edited by irangan: May 2 2007, 04:59 PM

Bro irangan, i would like to inform you that i might not be able to reply your message, if any, from Friday - Sunday this week as i will be having my holiday. Anyway, on Monday, i will officially start my working life as well. Not to mention something happened to my current GC which i need to RMA this weekend. Might loose my PC for a couple of months if i could not find a replacement soon. Therefore, if you could not find me (or i am not able to be reached in any point), do drop me an sms at my HP no. I will PM you the number later..Thanks & sorry for the inconvinience...

This post has been edited by akachester: May 2 2007, 05:18 PM

I just installed Speedfan and it shows the 'core' temp at 50C. What does 'core' mean? It couldn't be the cpu since using msi core center it shows 42C.

The sys temp seems to be okay around 33C, it's the cpu temp at 42C which I'm worried about, what could be the cause? The thermal paste? I used the one provided in the noctua box. Just a theory though, I don't really know.

Core is your CPU temperature.

Errr... you need to refer to the speedfan guide on how to setup it up for your computer.

One thing. Under the "reading" tab, go to configure. Then go to the advance tab. Select the monitoring chip of the mobo (e.g. for mine, it is Winbond W83627THF). See the temperature sensor diode - mine is set to PII diode. (but you need to refer and see what you mobo diode is).

It is a powerful app if you know how to use it properly.

This post has been edited by kmarc: May 2 2007, 11:02 PM

y bro if the setting wrong can damage the mobo ke bro
hehehe just to clear him up

UPDATE

I just recieved an email from my supplier saying that they will ship out the goods in 2 days time and in order to compensate back the time, they will use a faster method to send it. If they really do that for me, I am quite sure that the goods will reach Malaysia by next week for sure.

That is the good news.

Here come the bad news, I been told that NC-U6 is out of stock for now and they only can supply me on my next order. So to ppl that purchase U6, please pm your banking details and I will arrange a refund.

The second bad news is my supplier for AS5 is out of stock too. So I cant sell you guys the cheap AS5 as promised. But I will honour my words when my supplier restock its AS5 in near future.

The third bad news is I just recieved a memo from my company (I have a day job ) that they will need me to go to Sabah next week to settle something over there. I will be leaving around 11 May 2007, morning and only will be back around 15 May 2007, evening.

Dont worry. If my supplier is doing the stuff he promised, I can COD and send out the goods before I leave for my business trip.

Really sorry for the trouble but probably I am kind of in those bad luck zone. Everything dont works as planned and a lot of suprises lurking at the corner.

Sorry sorry again.

Really sorry for the trouble.

still can join?

No problem la. We know it is not your fault.

Hopefully your supplier will be more reliable in the future.

No you cant.. You just missed the boat

Sry

Thanks, bro

no problem bro... wish you all the best for your business trip... you have us to support you...

Oops..i didn't read the fact regarding AS5. Very well then. Just the U12F for me. No worries bro. No need to apologize, since it is because of you we are able to get the Noctua products. Hope can catch you next week before you go on your trip.

No worry ...

Just post for syok only

NH-U12 + NC-U6 on DFI UT LP mobo


Attached thumbnail(s)

u cant mount the heatsink the other orientation? whyah?

too big ah?

i would like to blow out the hot air from the back... that's why i'm asking...

sure can, but if I want to exchange the ram, it would be trouble to me.