one unit of NC-U6 for me, thx!

what abt the chipset one?

irangan,

still can order 1 unit of 3.5g AS5 for me in this bulk v3.0?

so, izzit the as5 sell at RM20 only since I buy with the chipset hsf together?

please reserved for me if you have extra unit of NH-U12 in this v3 bulk.

hehe, only get if got extra unit la...

mean this coming v3 bulk got extra unit of U12?

no la..

what I mean is, when the item arrived and the TS got extra unit of NH-12, then I will grab 1.

UGPM!

bro, please remember do edit the first page

where? I didnt notice leh...

I just back to home yesterday night and noticed a box on the table, item received in good condition, thanks to TS.

still got extra NC-U6 ? thinking get one for my another amd setup...

btw, no doubt with the performance of this chipset heatsink, now 36'c during prime compare to vc-rf which is 41'c

cant compare the performance of NH-U12 with the ninja/xp90c that I used previously since changed proc to X2 3800+ already

okay... will get one after my exam finish if still stock ready

btw, U12F is better a bit than tower 120... duno real or not leh

U12F vs Tower 120

Just post for syok only

NH-U12 + NC-U6 on DFI UT LP mobo


Attached thumbnail(s)

sure can, but if I want to exchange the ram, it would be trouble to me.

no comment for the U12F but the performance of U6 really impressive, highly recommended

woow...nice result there

2.6GHz @ what vcore? mine prime 2.5GHz @ 1.328v, temp 48'c/58-60'c

well, let me explain something...

before using NH-U12F, I was used Ninja on Opteron 146.

when getting the NH-U12F, at the same time I got myself X2 3800+ E4 (not that one from elhh82's bulk), when prime the proc, I got something temp. diff. both core around 8-10'c but for idle, the temp. diff. both core are indentical, 36'c/38'c. I re-install the HSF and same result obtained.

after getting X2 3800+ E6 from elhh82, I moved the E4 to my another amd rig, and run it together with thermalright xp90c. this time the emp. diff. both core is with 4-6'c which is normal for most X2 proc. this prove that the proc is normal.

okay, then I install the x2 3800+ E6 with the NH-U12F, under idle condition, the temp. diff. both core at least 9'c or higher. while priming, it can go up to 12'c temp. diff. both core. I removed it and installed again for 2 time, the result was same.

p/s: I tried the hsf in both vertical and horizontal location, same result was obtained and noticed that vertical give rise to the PWM temp.

This post has been edited by gsan: May 14 2007, 11:36 AM

no, it cant be the mobo reading wrong temperature since both of my amd rig are based the same mobo with the same bios.

still orthos'ing... 1.36v in bios and 1.344v in cpu-z wheread 1.34 in SmartGuardian. as you noticed, the temp. diff. between both core are 12'c. btw, the room temp. is around 31.7'c



Attached thumbnail(s)