not expert maybe wiring or central locking

Just kena same symptoms as yours.
Include slow power windows.

hi
anyone here know how to solve my aircond knob/controller?
sometimes it full blast suddenly, then off itself lol
then auto on at mid (i think) and the led will blink blink

done many times so called 'soft reset' which i set to maximum blower and turn down slowly till off
still same prob

Dear all,

May i know the price to change rear brake shoe? Being quote for rm150 for both rear. Brand FBK.

Anyone know what is this? Was changing the door handle, then knocked this off...

Check your central locking system / wiring. Could be cause the system cannot detect that the engine has been switched off.

Feel any difference with your door after this fell off?

Hi bros, Persona (2009) can install body kit from Persona Elegance or not? especially the front skirt.
Because realize the front bumper different, compare to the old Persona.
tenkiu tenkiu 😀

My knob too has some problems, nowadays I seldom alter the fan speed. Asked my foreman about the prob, he say the gears inside has already loosen, if wanna repaid have to change the whole set, 3 knobs together, cost around rm800. No thanks!

can,u need to change the whole set.

where got so expensive?

Patco Price (3 screws) = RM2xx
Sanden Price (4 screws) = RM2xx-3xx

Genuine Proton Product.

Is it? Dam my foreman cheated me.

It won't more than RM400 from spare parts shop.

Erm, not sure is the power window was malfunction before this, cz long time never open that., but right now, the only thing that don't work is the power window, the locks are fine.

Your foreman quote you the price already? Dam I fear one day I will be forced to change it.

Planning to change my stock springs, any recommendations? if possible, best bang for bucks one

nope..
just asking here 1st b4 ask workshop
afraid later they tipu me. hehe

asked at sc damn tiring
they said had replaced my knob but problem still there
that time my car still under warranty

power window problem quite common with proton. so far mine still ok but last time my wira i send to outside shop, the guy change the unit inside then ok de.

and sometimes the rubber holding the window, you need to clean it cause dirt gathers in there. if you send to carwash, the guy won't clean that part.

Yup.. Mine also tried to cheat me last time, but said it was the motor problem. Mega Auto Care is the name of the first workshop I started going to. RM400 and he claimed that there's a speed sensor inside the motor, but I've dismantled two motors already and none of them had anything that looked like a sensor.

I'm currently using Sapura Pro Ride Sport Springs paired with their sport absorbers. The ride is slightly stiffer, but it's still comfortable. I noticed that I can go an average of 20KM/H+- more comfortably at most of the corners I normally take. Sadly still far from the 120Km/H any corner also can capability. The front sport absorbers seem rather easy to compress when they were new.

Mine was RM2xx if I'm not mistaken. This is for the entire control panel, not just the knobs alone, which I think even if replaced wouldn't bring any difference.

So in the end what's the problem? I thought the gear inside the knob koyak already?