I never compare with other brand, solely based on what i got is good, but just too expensive.
No matter how, when i move in to the new house, the 2hp inverter i opt for living room will never be ME i think...would like to give a try to Daikin or Hitachi.
MHI can consider. Very flexible air flow pattern. See here. I use Sharp 2.5HP but previous generation AHXP24MV due to the ability to deflect air flow to the ceiling, self cleaning and plasmacluster. New generation has long air throw.
This post has been edited by halcyon27: Jun 14 2015, 10:06 PM
Hi guys, need advice. My new aircon Panasonic hp 1.5, when I turn on, got blowing noise and can also hear the compressor making noise. Is it normal? I thought aircon are supposed to be quiet? And when at the balcony really can hear the compressor engine sound.. Please help.....
Hi guys, need advice. My new aircon Panasonic hp 1.5, when I turn on, got blowing noise and can also hear the compressor making noise. Is it normal? I thought aircon are supposed to be quiet? And when at the balcony really can hear the compressor engine sound.. Please help.....
Like it ?
That is normal, even new Daikin still not quiet at all
This post has been edited by kimsim: Jun 14 2015, 11:09 PM
To be compare indoor aluminum coil design for more thicken the only ME and would be easily get bend and dent at all.
Pana & hitachi just so so.. Cause very weak can easily bend or dent after wash on coil fin, so the dirty dust would be remain until forever, once remain and reduce the airflow too.
York/Daikin still quite ok than others expansive Japan brands.
To be compare indoor aluminum coil design for more thicken the only ME and would be easily get bend and dent at all.
Pana & hitachi just so so.. Cause very weak can easily bend or dent after wash on coil fin, so the dirty dust would be remain until forever, once remain and reduce the airflow too.
York/Daikin still quite ok than others expansive Japan brands.
received my electricity bill ...1 unit 1.0hp daily sharp inverter aircon usage for 6hours , 2 water heater use for 2x daily , 430l Sharp inverter fridge , 1 water boiler cook water 1x daily . monthly only RM65....
time to throw my water boiler and switch to gas cooked already ... electricity consumption quite high for water boiler....
This post has been edited by ^Ware^wolf: Jun 15 2015, 02:08 PM
received my electricity bill ...1 unit 1.0hp daily sharp inverter aircon usage for 6hours , 2 water heater use for 2x daily , 430l Sharp inverter fridge , 1 water boiler cook water 1x daily . monthly only RM65....
time to throw my water boiler and switch to gas cooked already ... electricity consumption quite high for water boiler....
Now you realised the electric boiler water used more than Aircon right.
Am having some issue with Mitsubishi air-con, model is MSY-GJ10VA..
Seems when the aircon is running for the 1st few hours it will have popping and ice cracking sound from the indoor unit, after achieved the desired temperature no more got sound..
But if I increase or lower the blower fan speed, it will have a cracking sound and popping sound for few minutes..
Have the Mitsubishi technician checked and he mentioned nothing is wrong..
Please help as its scaring the kids with those weird sound in the middle of the night..
Am having some issue with Mitsubishi air-con, model is MSY-GJ10VA..
Seems when the aircon is running for the 1st few hours it will have popping and ice cracking sound from the indoor unit, after achieved the desired temperature no more got sound..
But if I increase or lower the blower fan speed, it will have a cracking sound and popping sound for few minutes..
Have the Mitsubishi technician checked and he mentioned nothing is wrong..
Please help as its scaring the kids with those weird sound in the middle of the night..
Just double check the Aircon when installer they used hammer & nail the wall plate or used drill and screw to tie the wall plate?
Once the wall plate has been something dent then after temp had changed, would be created the cracking noise when compressor stop after gas kick in.
Installation to be the most important than the Aircon
This post has been edited by kimsim: Jun 15 2015, 05:14 PM
Why one of my Panasonic inverter Aircon, the remote like not sensitive. Strange thing is this unit is the closest and lowest than the rest yet it cannot detect the remote. Have to really point at the Aircon baru can.
It also makes a noise when the louvers are swinging on their own. Also after it is completely off, it can make a noise like opening or closing some valve.
This post has been edited by idoblu: Jun 15 2015, 05:15 PM
Why one of my Panasonic inverter Aircon, the remote like not sensitive. Strange thing is this unit is the closest and lowest than the rest yet it cannot detect the remote. Have to really point at the Aircon baru can.
It also makes a noise when the louvers are swinging on their own.
I told you already, Pana never solve the louvre swing motor over a 10 yrs b4.
Just put some grease on swing motor then solve.
Remote control like KDK or Pana ceiling fan must be point to the sensor then baru detected