QUOTE(ygzdwdza @ Sep 3 2015, 08:38 PM)
I tried to flash recovery on my phone using SPflashtool, but my computer can't detect my phone,
I have installed all the drivers I need, the adb driver and vcom driver also successfully detected my phone,
but when I tried to use SPflashtool, it keeps stuck on the download step, any idea?
Try this step.
[UPDATED LINK]
Download this (MTK_UsbDriver_autorun_1.0.14_internal.exe) from the link below (Lenovo driver)
http://rootjunkysdl.com/?device=Android%20...s&folder=LenovoInstall this driver, then reboot.
1. After reboot, do the step on shutdown the phone until you feel vibrate.
2. Open the SP Flash tool and follow the earlier steps (then click download / CTRL + D)
(This step will re-detect the new driver and set the new port)
Now plug in the phone, you will notice that it will detect the phone and install the driver, and the SP Flash tool will now detect the port and start the flashing process
(Similar solution for those who cant detect the port to flash & those who installed the driver but cant flash)
Had that problem earlier when following the steps, and notice by doing this, the SP Flash Tool now detect the new port and it works.
Just make sure that you enable the debugging mode on the phone before shutting it down.
This post has been edited by wulfredz: Sep 3 2015, 08:55 PM