Ok this one

https://shopee.com.my/ysl.my/1329370307?ver...174b23a27d26111

https://shopee.com.my/ourlover.my/151207739...b49ae0820ecfd6b

This post has been edited by kelembai: Nov 6 2018, 03:54 PM

All my 20amps switches, I use what was given by developer, which are non smart Schneider Vivace
They are always On anyway
I also don’t have any Sonoff Wall switches. Only Sonoff basics and smart plugs

This post has been edited by idoblu: Nov 6 2018, 05:51 PM

The 20A touch smart switch is too expensive I think or should I say over-priced.

http://eshop.vivalec.com/index.php/etouch-...ter-heater.html

The more economical approach would be using normal touch switch in combination with sonoff POW that handle 16A. Should be able to handle 1HP air-con and 3kW water heater.

Just take out the Sonoff Wall switch glass panel and spray it in black color.

Hello guys, I am considering the Mi smart home system but I think one gateway may not be enough to cover the required area:

1. I suppose we can have multiple gateways in one system right, but must these gateways be in the same wifi network? (my current wifi setup is different floor different wifi)

2. is getting zigbee repeater better option?

if my understanding is correct, mi devices can communicate using zigbee without wifi/internet...

You can also add a cable modem combo router
https://cartvela.com/best-cable-modem-router-combo/

1. Can use several gateways. Different SSID should be okay
2. Up to you. Whichever works best for you

Hi guys... If my current conventiona switch is a 2 way switch... Which sonoff switch and xiaomi switch should i use ?

Got a Sonoff switch Need to find a neutral wired to connect it

Two way means two switches controlling the same lights?
If yes, then for Xiaomi just connect one wired Wall Switch on one end. The other end use a wireless wall switch.
Xiaomi is actually multi-way

But the existing two way switch has two live wire oredi... What to do with that two ive wire ?

Do you know how to wire a two way switch and understand how it works?

This post has been edited by idoblu: Nov 7 2018, 08:04 PM

Like this picture right ? so are you suggesting that i just ignore the other "com" wire (the brown wire in the picture), connect the live wire to L in xiaomi switch, the grey wire to L1, then on the second switch part just remove the switch, short the grey wire directly to the load and then use a wireless switch as the second switch ?

which product within Mi is the zigbee repeater?

yes

There are 2 methods of wiring. The wiring diagran here is old method. The new one is using 3 wires between switches. Are yours using 2 or 3 wires? Mine is using 3 wires. More flexible.

interesting. got any diagram of this?

You can read here:

https://circuitdigest.com/electronic-circui...ay-light-switch

one more question guys.. are you all using xiaomi wall switch that requires neutral wire or the one that doesnt ? Is it better to just ask my contractor to pull a neutral wire ? or just buy the version that doesnt require one ?