Actually just curious the Mitsubishi Chiba part is authorized by Japan or not authorized one? Coz I saw for Campro they have borsch china n Borsch germany

This post has been edited by TitanRev: Mar 17 2015, 09:43 PM

Yar loh... very unhappy... especially when i saw the box... made in china...

Like wtf...

GETRAG gearbox using china crap.... nabeh...

Our borsch 500ish fuel pump assembly also china fuel pump...hahahaha maybe they scare if use German parts ppl complain more y so expensive

I wouldn't worry too much if the factory OEM are endorsed. I can't imagine if China factory produce crap for BORSH and or GETRUG, what they're going to do with their SLA. It's like nowadays every single thing we use at our home are from China. iPorn Caina, Galexy note Caina, Berakberry Mexico. Make the comparison lar, is Berakberry bulletproof despite not made in Caina? I think it's just 1 time deal and luck lar. And for drfeelgood, I really feel you bro. Angry also no use, wan change gebox mou?

A sad day for Daisy yesterday, she had a breakage of her dash vent.


I've done a repair that I hope may hold, those curious can read my tale of woe at My Weblog

I wouldn't worry in the slightest, China can make any quality from the top shelf to junk, depending on how much the trader wants to pay.
China has a space program that actively sends humans into the void too, not many countries do that.

Totally agree

I saw new addition of bling bling at the vents Will it glow in the dark?



This post has been edited by davidke20: Mar 18 2015, 08:03 AM

hi there, back here with BLM and FLX

FLX SV missing those car passenger in rear grab, wtf

the FLX feel different than BLM
brake seem not responsive, not sure, may be driving habit

FLX pick up faster though, i still scare drive during heavy traffic, minor jam due to the brake

The gear switching is so tight

If you're never in the rear then why care?
I changed my brake pads to very cheap ones after a month, brakes are much better since.
Protex Blue

This post has been edited by wankel: Mar 18 2015, 08:48 AM

What we dun see... dun make us angry...

When i saw the box... i got angry... seeing the Made in China crap.

Yup I agree. China can make the best fakes in the world too..

I also know... china can make a screwdriver costing 5 cents to 50 dollars....

And I would never believe Proton will pay top dollar for its parts..

http://listverse.com/2015/03/15/10-bizarre...appen-in-china/

This post has been edited by drfeelgood: Mar 18 2015, 08:39 AM

I named her Daisy so a bit of yellow to go with her pale white body seemed right. It doesn't glow in the dark, but as nice as it sounds it isn't really something you want.
I like pretty things, as I age I like pretty things more and more, I think I may be becoming homosexual in the same way as actor James Franco, up to the point of sexuality, then I'm straight!

You are 1 funny lad I like it plain and smooth to my eyes. I wish we have beige color dash trim/door trim. I like my Shawie's interior so much more than my GaGa

No, the ECU won't need to take few days to re-compensate back the chance in fuel pressure. It will know immediately since there's an O2 sensor. They ECU will know if you running lean or rich once the engine start and drive. It will control the PD on the injector reduce the opening timing. But just look it like this since the pressure is higher before the injector and when the injector opens it will still spray more fuel due to the higher flow rate n pressure.

Just imagine your house water hose
example at
10psi - you open the hose nozzle for 2 secs it spray velocity is 30
20psi - you open the hose nozzle (ECU change) for 1 secs it spray velocity is 50

You see the relation here? it's just example la for easy understanding. As you increase the input pressure the spray out velocity will increase it measn you get more fuel into the CC faster at higher pressure.

Correct me if I'm wrong.

Oh just a small info, your sage injector is 6 holes in an arrangement like this ---> ( ) 3 holes on each side. Spray pattern is in circular form surrounding the spark plug.

Hi Bro...

Firstly, may i say that the abv info is of no significance 2normal car drivers/owners...
Why do i say/feel so?
Cos in Msia, there are so many petrol stations @very close intervals!

Why wld anyone need 2drive their cars till the fuel low lamp starts blinking?
Can some kind soul pls enlighten us re the need 4that kinda info? Tqvm.

Bcos of curiosity?
Rber...the saying.."Curiosity kills the cat"...?
Mayb not kill the cat but damages the pocket?


ps. Me alwaz top up all cars me hv ever owned/used when fuel level is @2 bars left...

Reply below also refers...

This post has been edited by zeone: Mar 18 2015, 02:05 PM

I, for one won't run my fuel low because the fuel pump gets hotter n hotter when there's no fuel. I always go refill when I still have 2 bars left and just info our fuel tank no partition inside the fuel tank and fuel inlet from tank to the pump assembly is just a small a 1 way tiny hole. With no partition in fuel tank you run the risk of starving the engine if ur fuel level is too low to flow into the inlet valve

I have done 60+ km after it blinked... not because of curiosity... but because on the way from Perlis (plus) to PP there wasnt any Shell station... only Petronas and I hate Petronas.... so no choice, drive at 80 till reach the first Shell station...

But it was scary and I wouldnt do it again...

My mechanic said my engine mount is bad that's why car is vibrating. Shall I get OEM engine mount? Since Proton engine mounting doesn't seem to last.

This post has been edited by Jusb: Mar 18 2015, 06:20 PM

Hi Bro...

A truly "Heads Up" there!!

TQVM 4that INsight/INSIDEr info....
Me hv nvr ever subs2 that "Ignorance is Bliss" philosophy....
More of a "Better 2b safe than sorry" & "Knowledge is Invaluable" practitioner...

Hi Bro...

Fully agree with & support yr last liner...

Yup, at such a time & faced with such a scenario, any petrol is alwaz better than no petrol!!
Gotta push aside all prejudices lo... True?

This post has been edited by zeone: Mar 18 2015, 08:18 PM