i have pull out the fuse 15A, plug it back and pull it out again.. then i put it back and start the car.. still same.. rev itself.. so disappointed after today car service - gasket changing..

i told the mechanic, he told me not to worry, it because the oil need to go back to it position.. but morning until now still like this.. shit..

do you know that , ECU have 2 fuse . one in the engine bay , other one is inside passenger cabin beside your driver door only. If still cant unplug the battery terminal

Any CVT related matter, pls deal with Plotong. Be sure to use Plotong fluid also. There are incident that some smartbottoms being so smart uses Hongda CVT fluid in their GaGa and ended up change gearbox to manual

Probably not, need to wipe certain data pulling fuse wouldn't do that. But no harm trying. Usually I've seen SC hard connect certain wire to do the reset. Otherwise, also tried use OBD2 to reset. I haven't came to see a shop to do it for free. If you found 1, pls share. Thanks

Unplug battery/replace fuse of ECU can recalibrate throttlebody?

Hi all, i was planing to change my saga flx se tyre from 195/50/15 to 195/55/15,Use back the ori rim, ori absorber and ori spring.

Base on the feedback from the member who changed the tyre the problem is the 55 profile will scrub the mudguard in full turn.

So how about when we doing u-turn on the road? Will it scrub the mudguard as well?

My purpose is reduce the bumpy feel and tyre noise when 4 or 5 ppl in the car. Or just upgrade the suspension and stick back the the 50 profile tyre?

Hope all sifu can gv me some advise, thks...

This post has been edited by bcbc2308: Mar 9 2015, 09:46 AM

that one not so sure . recalibrate throttlebody can go authorized sc they have pdt software can calibrate. But for me , its work .

Noted thank you! Will deal with proton anything regarding CVT ^^ and thank you for the previous help regarding the brake, it's fix with a set of new rotor and pads I'm gonna plan when CvT service go bak plotong if normal service under the tree

This!!!

Power....
Gaga now can fly... Up into the trees..

Wow.. Gaga fly higher than godcar.. somemore mayvi previously saying: "Fly to the moon also can" on radio never actually fly higher than gaga..

wad a statement from the mechanic... i think u wont need to visit him again in the future...mechanic from proton SC or other workshop?

Other workshop.. Haiz.. Ask my wife send to the workshop just now.. They say the timing need to reset.. They open the engine cover and plug out something and thighten back.. That's all.. All done.. Back to peaceful moment..

This post has been edited by Vincent_A8fm: Mar 9 2015, 07:12 PM

hmm...cam timing i suppose?

not sure ohh..

the open the gold colour cover to change the gasket..

Hi all. My Saga BLM is having alarm issue.

When alarm is set, the alarm will trigger itself.
I checked, no sign of door opening at the dashboard.
And the alarm will just triggered itself after few minutes I locked the car.
And at first I thought is the door sensor, maybe never change before, spoilt and I changed at SC. But then, the situation still remained the same.

Any brothers here facing same problem?

Probably is ur camshaft timing sensor out already. Because on the rocker cover on the top right is a cam timing sensor.

I have same problem, if u have read Ive also ask in the past few post, I've tried out methods but still keep trigger itself -.- idk what to do also