try put some silicone or lubricant.. hmm recommend go accessories shop or mr DIY buy the window lubricant.. apply and try whether got any help.. for me, it do work and until now no more sound when close the window..

But it stuck like anti-trap feature turn on.... But in fact, nothing there

same problem here.
Went to Nilai SC, they adjust the door stracker.
i cannot say the problem 100% solve but better than before.
need to get used to it.

My advise, do not send car to Seremban SC for complain except normal service(Syntium 800 and Syntium 1000)
steering got noise (replaced steering rack but the problem is still there)
drive around 10mins (straight road), ESC will illuminated and steering vibration at speed ~120km/h.
call the SC, they said already done(alignment, balancing and reset ESC)

Next day, i went to Nilai SC, complain the ESC issue..
they check and around 30mins, they call me to get in the car(drive around Nilai Lama) to investigate the problem.

BAM..

1. they take the scan tool
2. check the steering angle sensor..... WHAT??? -28deg
3. reset and set it to 0
4. re-alignment... problem solved.

problem that i am facing now:
1. steering noise during turning (slow speed)
2. steering vibrate at 120km/h

My advise, do not send car to Seremban SC for complain except normal service(Syntium 800 and Syntium 1000)

Thank you.

This post has been edited by xphr3ak: Jun 29 2015, 10:00 PM

One of the common problem, can get the rotor to be changed at SC easily.

i have experienced this problem before.
Need to try 2-4 times to fully close.
Take your car to SC and ask them to reset the main power window settings.

Thank you.

noted... i think will get it done next services

No harm done bro. I just mentioned the actual price to others. Actually I only pay RM700 cash for the tinted (after deducting the voucher). Asked for Raya promotion

They do not install security tint on the windshield, just normal UV protection tint. Bomba will not allow security tint to be installed on windshield.

Noted. Thanks bro. Will call them for appointment.

oo then i know.. happened once to me before.. since when you pull up the button should got giving you 1 "click".. dont use that auto wind up feature.. manual wind up (meaning dont pull up the window with that "click") hopefully you can understand what i mean.. haha

thanks. Yes, this is how i resolve it when the things happen.

i try to off engine and redo again.. problem solved.. just happened once previously.. im not sure what happen on it.. but same solution from both of us.. until now, everything ok.. haha

i got it, but i change it into rebate.. hihi

Can Preve use those led bulb for headlight? Interested changing to it

not recommended, even tint shop usually don't do for you.
imaging when a car had accident, door can't open, side windows can't break in coz security firm, front windshield is the way can get in and rescue faster.

Now using preve cfe for 3 months.
Pleased with my red preve.. at first, i was shocked a bit with the performance.. can beat 2.0 car easily and usually highway user will let me potong them.. hehe... satisfy with the handling performance ( had connering at 120kmph and still stable )
ODO will get to 10k soon.. want to change fully syntetic engine oil.. occasionally I use v power shell for for performance at rm2.90/litre..

After 10k service. I want to do these.

1. Sound proofing using autoform ( feels like uncomfortable to hear vehicles and tyre sound outside) - expected damage RM880.00

2. Change to Red Black leather seat - expected damage RM1600

3. Add tinted ( currently using prefe stock tinting film . Anyone knows about the light transparency on windows using preve stocks tinted? If I put additional tinted, jpj will disturb tak? - expected damage RM1000.

Bro, please pay a visit to GA Autoworks soundproofing workshop located at Taman Melawati KL. The boss is Ex-KL autofoam staff. Good experienced on preve soundproofing and nice ppl as well. I had done all my foaming work thru him with reasonable price.

https://m.facebook.com/GaAutoSoundworksAccessoriesEnt

It depends on which type of leather. If u said genuine or nappa leather, i don think 1600 is enough. Quote from Carbi deco. Ultimately cost about 2.8k for nappa leather (Full car including seat, armrest, doorside)

guys , just checking on those using latest HU blaupunkt 830 model.. is it comes with reverse camera?

i check the features for this model, it comes together with reverse camera.

It is reverse camera ready, but PROTON doesn't provide the reverse camera. Also, the plug to connect the reverse camera to the BLAUPUNKT HU may not be available locally yet. It is not those traditional RCA socket type.

Guys,
my friend got preve cfe last week.
How to reset TRIP counter (A,B,C) ?

Hold the Info button.

for the tinted.. it's ady near to to JPJ compliance allowed VLT % ady.. if added sure cannot pass.. but dont too obvious dark i think jpj wont kacao.. if want then go add layer, or else dont add if scare.. haha

i think stock tinted from ecotint is good.. just maybe u need re tint for front and rear winscreen.. side ok for heat rejection

This post has been edited by ChuanHong: Jul 2 2015, 01:13 PM