no lah just put it 1.45 enought edi for everyday used...

No worries, just set it to 2.85v then. Now just set it to the highest speed the ram can handle first, then lower your cpu multiplier. We use 8x ok ? Then put it 200mhz, 2.5-3-3-7 and burn in the rams at 2.85v for 1 day.

sorry for the late reply, have been quite busy lately. my apologies.

my rams are currently running @ 2.85v @ 235mhz.

and i just found out that the mobo i'm using does not allow me to choose the CPU multiplier or even the CPU:RAM divider. so i'm wondering how should i set it. only setting i can change is the HT multiplier, but i don't see the point in changing it, as my HT is still safely in the 1800-2000 zone.

what should i do now?

guys...this is really drove me crazy...
i'm actually on A64 3000+ and overclocked to 2.88GHz (320x9@stock vCORE) with Team eXtreme PC4800 (3-4-4-8@2.8vDIMM), until last monday, i encountered weird things...it seems like my RAM can't do @DDR640 anymore, even i increase the vDIMM to 2.90vDIMM, same, it's BSOD...suspecting my PSU (i'm using Enermax FMA 350W), i unplugged all bling� items, secondary HDD, ODD, Sound Card too...same BSOD on windows loading, sometimes after 5 minutes logon to windows..., had a thought it might be cause of my overclocking madness, i decrease the RAM speed to stock (200x9), even worse, it won't boot. lucky for me, my brother swapped his RAM (Kingston HyperX PC3200 -- i believe it's CH-5) while mine is in my bro's rig for testing...it is amaze me, my RAM is rock stable, can run at DDR600, play with timing or watsoever...while mine on Kingston HyperX, yeah maybe due to limitation of the RAM, i can't go further than DDR450. this is confusing me, why my Team eXtreme can't go at DDR620 on my PC but it ran rock stable at DDR600 in my bro's PC?

some tccd hate high voltage (especially d ealier batch), have u tried lower vdimm instead? dun think it's d psu issue coz usually fma psu are realiable. other than that it cud be mem controller issue which is related to ya chip...

yeah i did that (lowering the vDIMM, from stock 2.6vDIMM to 2.8vDIMM), but still BSOD...is it something related to CPU? well i don't think so, as i manage primed more than 5 hours (i quit after that -- need to play games)...

what kinda setup u used to prime?

sniper ur venice running 2.88ghz with fsb ratio 1:1??..

This post has been edited by noobianz: Jan 11 2007, 01:19 AM

guys my pc was amd64 3200+ oc to 2.4mhz and my idle temp now was 38 C and max load at 50 C. is that normal for me ?

i am using a freezer64 also...

small FFT for CPU stress test...FYI, if i were lucky, i get to windows, test some SuperPI and guess what, it'll restart, i used to be lucky got error message like Not Exact Round, but not like this...it restart...

yeah, 1:1

nice2,my ram if run on 1:1 ratio with default vdimm can only push around DDR511...>.<

:OFFTOPIC:
mcrae,u from mmu melaka?taking wut course?same here,mmu melaka too =)
looking forward to meet u next sem,maybe we can discuss more bout pc's..n btw,im from ipoh too

This post has been edited by noobianz: Jan 11 2007, 03:13 AM

hehe... i am just first year in engine...

now mmu holiday, i have NBTD until overclock my pc

BTW where u stay ? rented house or hostel ?

guys...guys...watch it...:opps:

anyway, i found my RAM stable at DDR450 , wtf...i used to run daily at DDR620, and now this? it really hurt me in gaming performance..., i'm thinking to change my 350W FMA Enermax because it might the problem...but i'm not quite sure...

This post has been edited by sniper69: Jan 11 2007, 12:45 PM

yea.. 350w is not enough for o/c this days... maybe u could consider for 450 - 560w nowadays

yeah...come to think about that as my siggy said so...FYI, i've been running on 350W FMA since day 1 after used PowerLogic Atrix 500T which is totally f**ked up my rig 10 months ago...from my POV, i think, as for now, 450W~550W is good...

not d sp setting mate, wat i meant was ya ram & chip settin...

ya,im curios too know...too

i used to run at DDR620 @3-4-4-8 @ 2.8vDIMM

try @ 2.9v... used the same ram as sniper doing DDR640 @3-4-4-8

yeap, tried already, 2.9vDIMM (read as 2.97vDIMM) with active cooling, also same result, BSOD on windows booting..., i wonder how's that happen after long time use @DDR640...is it my RAM died? i don't think so as my bro's mobo can go all the way just like normal...