buy faster one..

if urs is slow, mine is?

EDIT: i also plan to oc my pc my proc that is but i have no idea how

This post has been edited by TerryZeroX: Aug 3 2006, 10:02 AM

1st of all, wat do u mean slow?slow in startup?slow in gaming session?there are many kind of slow...
n yes, u can always oerclock it, to me, ur system 'readily' to be overclocked!
at BIOS, su can upper ur FSB to get higher CPU Clock
use CoolBit (since u use nVidia) to increase GPU/Mem clock

these are the basic tool ok...

the picture is a bit messy. but i tried to arrange my wired perfectly but tell you one thing it dun go like what u think. haha. it is like if i pull this, the other will get affected. damm. i did buy the uv cable protector to make them more beautiful and more tidy. my friend tried his best to hide as much cable as possible. but space is limited. the bettle and the ram gap is like 0.5cm. and the side fan to the bettle is about 1.5cm. so space is too limited. who ask that bettle to be that fat. haha. anyway thanks for the comments. i'll try to arrange it and make my comp faster. i will try my very best and will let u all see the result later. thanks. ^^ cheers

Which is slow oH ?
All looks fast fast

If say Loading is Slow ... go get Maxtor Raptor 10Krpm.

If say CPU mark is low , Bump up your Bus speed.

If say MEMory Bandwith is low , Bump up your RAM speed.

If say Graphic Frame Rate is Low , Bump up your GPU core speed .

If say Your Fans is slow , Bump up the voltage .

If say Mouse responds is slow , Bump up your Mouse Respond .

If say sound respond is slow , get Sound Blaster Xi- Fi platinium

If say everything is slow , Reformat your Computer , Split the Partition of HDD into Windows , Program and data directory .

well if you think that your system is slow then sell it to me and I think I will last at least 2 years with that spec

thanks man. thanks for the advice. cheers

.. thanks for the comment bro. i was just thinking of making it a bit faster. never intend of selling it. coz it is good for me now. thanks. anyway. ^^ cheers

hi everyone i have amd64 3500 s939.. when i used cpu-z it say my cpu codenamed is machester... some one just tell me maybe i have an AMD X2 with one core is disabled. If disabled anyone can help me to unlocked it? TQ

Can Someone teach me how to adjust RAM timings ?

I have that chip. Its a crippled dual core. Runs hotter than the Venice 3500. No way to unlock the 2nd core.

Have upgraded to a X2 3800 now though.

can do in bios

HOW ?

State your mobo brand and model. Some mobos don't have options like these.

ermm, I just OC'ed my A64 Venice 3000+ to 2.5GHz (running on stock cooler and vcore is around 1.5V) and just gone through 6 hours of prime without error...
RAM freq is 230MHz (using a 6:5 divider) and only tested in Memtest86 for 3 hours and no error..

The max temp of proc is around 52~53C during max load, so is this normal?

btw, my PSU stated as 300W real power and 600W max power, so this is enough for my rig? (I have a X1600XT gpu as well..)

just got my Opty 146 (2GHz), PNY 7600gt, DFi NF4 SLi and Sunbeam 550w NUOO series last week....
till now still try to get the most of it mainly at the proc & mobo segmen... needs some advice out there maybe this setup can do more than wud currently i got

the full specs are:
AMD Opteron 146 (2GHz, 1MB L2 Cache) @ 2.76GHz, 166MHz Divider
DFi Infinity NF4 SLi
Kingston Hyper-X 512MB PC3200 (Windbond CH-5 chip) @ 230MHz, 2-3-3-8
PNY 7600GT DDR3
Sunbeam NUUO Series SLi 550w

below are my latest screenshot since last night...

bro..jus try oc my x2 3800+..but cant make it 2.3ghz above..
i hv try run it at 2.3ghz with 1.45v vcore, 2.80v vdimm and 3-4-4-7 5:4 timing with HT freq 4x/3x but after 7hours prime..its stop..can help me?this my spec:

amd64 x2 3800+ s939
abit kn8 ultra
512x2 corsair xms c2pt tccd chip
x800xl flashed to x850xt pe
520w ocz modstream
xp120 with 12 cm fan
200gb sata hdd

erm btw my full load temp is 58'c..izzit ok for dual core?

This post has been edited by mfcm: Aug 12 2006, 02:27 PM

Abit KN8

Dude, ur psu rails are too low. U are risking your hardwares with that such low rails. Try to find DMM and measure it, or decrease the clocks.

Im using the same mobo as u, but havent maximise my proc yet. Just use the rated speed timings. When u reached the limit, then tighten the memory timings.

This post has been edited by uzairi: Aug 13 2006, 12:57 AM

Can teach me on how to do it ?