I've had tested dinster's venice before and to my surprise the most it can do is 2.4GHz.
Not all venice is that good so to speak. But from my observation of databases btw, most venices easily hit 2.6 GHz however.

imo venice is very3x depends on luck.. some with good stepping/week/earlier batch perform very well but some of them is worst.. this applied to 0530 above also.. some of them is really3x good..

maybe dat rams is giving u some problem should try loose setting... have da same proc as us, manage to prime at 265*9 ddr333...

not every chip can clock d same way, it's bout luck sometimes. i dun think dat he's gonna put 2225 on kvr, it's outa d ram capability. any looser than dat, i believe it's not d ram problem nemore, most likely w other settings like ldt stuff and etc...

his ram is running at 199MHz only FYI
it might be his proc or other hardware limitation

This post has been edited by LittleLinnet: Feb 1 2006, 11:38 PM

how do I know that my proc overclock performance is limited due to memory controller?

Hmmm....this is my setup...

AMD64 3000+ venice E3
512x2 KVR BT-D43
DFI NForce4 Infinity

So,whut do u all wanna suggest me for ram timing,FSB,HTT and so on.
OC newbie here.

yo dude.. diff people,diff procs,diff ram, so diff setting.. even same ram chips or same procs stepping, dun ever think they're identical.. lain padang lain belalang..
there is only one best setting for u.. why not test it first?..
neway since ur ram bt-d43, maybe u can loose the timing to 3-4-4-8, raise the VDimm to 2.8.. after dat only u increase the fsb.. keep it at 1:1 divider.. let see how far ur procs can go 1st..



disable the CnQ..
make sure to keep ur HT speed 1000 or below(HTT * HT multiplier == HT speed).. u can make it by adjust the HT multiplier.. have fun..


This post has been edited by newbieockids: Feb 3 2006, 10:35 PM

by keeping it at 1:1 we'll know how far the proc can go? It's not the ram that's withholding the ocing process while it's at 1:1?

its not the ram itself.. but both procs and ram.. i said that bcoz regarding ur bt-d43.. most of them can easily hit > 250 HTT with 3-4-4-8 timing..

is the batch no. 0532 for AMD Athlon 64 3000+ socket 939 good?

can somebody give me some explaination on this about the batch no.?

Thank you.

ok guys, is the vChipset n vHDT(sp?) REALY REALY REALY important?
[not available on neo2]

for fagget sakes, i cant run my rams beyond ddr520 at whatever vdimm, even with 1c.tccd SideEffect mod bios...

NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!!!
dont tell me i need a DFi UltraD

This post has been edited by e-jump: Feb 10 2006, 09:33 AM

rp? ma? cpc on or off?

this is what from the bios..
i dont tweak A64 in windows, coz i dont like it
prefer old method of oC from bios [as i can memtest it]

btw, my proc wont run 2T, be it value ram, or performance

how bout set rp & ma to auto?

Any1 tried the new AMD Athlon 64 3000+ s939 with the stepping NBBWE 0604 EPAW?

Mind Share with us?

rp as in read preamble n ma as in max async?
not available in bios..
this mod bios only have the basic 5 timings + trrd, twtr,trc, trfc n drive strenght

i really wish my epox came alive, as it have more advance settings

and i dont think i will invest on dfi juz to get my ram run higher than stock...

This post has been edited by e-jump: Feb 10 2006, 09:30 PM

new to A64 here..

question...A64 3200+ (sc939) can easily clock to 2.4GHz?
and...is HTT, HT Multiplier a RAM setting?

This post has been edited by gr2000: Feb 10 2006, 10:55 PM

im a newbie in this AMD thingy..juz wanna ask..wuts the different between manchester and venice? which is latest version..

prolly u'd need a venice instead as they have better mem controller compared to winnies. My winnie cant run my rams beyond ddr480 man, i shall try the ram with other proc later.