Outline ·
[ Standard ] ·
Linear+
AMD K8 Family Overclocking (754/939/940/AM2/1207), General discussions and newbies' guide
|
redbull_y2k
|
 Feb 11 2006, 02:53 AM
|
|
QUOTE(e-jump @ Feb 10 2006, 09:24 AM) ok guys, is the vChipset n vHDT(sp?) REALY REALY REALY important? [not available on neo2] for fagget sakes, i cant run my rams beyond ddr520 at whatever vdimm, even with 1c.tccd SideEffect mod bios...  NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!!! dont tell me i need a DFi UltraD  prolly u'd need a venice instead as they have better mem controller compared to winnies. My winnie cant run my rams beyond ddr480 man, i shall try the ram with other proc later.  |
|
|
|
|
|
redbull_y2k
|
Apr 6 2006, 05:10 PM
|
|
|
QUOTE(ryugan @ Apr 6 2006, 02:01 PM) ok..i ve done it... 250fsb @ 250 mhz ram(500). timing 3.3.3.8 @ 2.8v vcore 1.490.. but sumthing wierd. i set proc multiplier to 8x...@ bios...when boot up .to windows...n see @ CPU-z still 9X  should disable Cool & Quiet feature in bios as well. |
|
|
|
|
|
redbull_y2k
|
Apr 7 2006, 12:31 PM
|
|
|
QUOTE(KilJim @ Apr 7 2006, 12:01 AM) I'm guessing that's the main thing limiting your speeds now Cause your rams probably cant go much above 250mhz, so put some lower dividers on them so that they'll run lower and wont limit your proc CnQ doesnt have to be disabled when OCing But you should disable it so that u dont have any problems CnQ must be disabled if u plan on using a lower cpu multiplier, else it would go back to default whenever u enter windows esp if u had the A64 driver installed. |
|
|
|
|
|
redbull_y2k
|
Apr 7 2006, 01:01 PM
|
|
|
QUOTE(KilJim @ Apr 7 2006, 12:50 PM) Ah...i see But with a max multi of 9X, no one really needs to lower it  yup, only affects u if u decide to lower it tho. Like in case u wanna test the highest stable HTT for the mobo, u'd lower the cpu n ram multiplier.  |
|
|
|
|
|
redbull_y2k
|
Apr 26 2006, 03:55 PM
|
|
|
QUOTE(thefryingfox @ Apr 26 2006, 03:30 PM) Here's my screenie? any advise? 3000+ Winchester Msi K8n Neo2 Platinums 250fsb x 4 multiplier rams are at 1T at 2.7 volts ( winbound ch6) i cant go above 270. not sure why...timing at 270 with 166memory devider dont give me any good responds even at 2.85 volts this processor should be able to go up 2.6ghz at 1.6 volts..but im not sure why its acting up. voltage for 2.2ghz is at 1.45. even i pump up to 1.550(max this board allows), i cant really boot up also  anyone got tips and hints for me? i suspect my rams are the culprit..bloody dual sideds  what ram r u using? How bout if u lower the timing to 3-4-4-8 instead.  |
|
|
|
|
Quote
0.0336sec
0.22
7 queries
GZIP Disabled