Looks like it has the Australian market DRLs in place of fog lamps.

and the rims look incredible

This post has been edited by YouDontKnowMyName: Dec 9 2014, 11:05 AM

Hi Bent_Gee,

I have installed it few months back on my EB following this blog too. Works great!
But too bad I have to give up the USB port for powered up the speakers.
Just follow the steps provided in the blog and you'll be fine...

sunny

Id wait a month or two to decide if i were you. So, is the bodykit same as what have been posted? Id love to get rear fog lamp and maybe drl.

Anyway, i think proton cars became better with newer batch. End of life batch should be pretty much "problem free".

This post has been edited by raclette: Dec 9 2014, 08:46 PM

agree. the noise not a big problem to me, even my wife and children having a good sleep for every long distance journey.

Guys, just to share as of todated after the last service my overcrank issued resolved. Managed to talk to the foreman who did the service on my EB & below is what he did.

1. Software adaptation(most of us did).
2. Service/clean engine throttle body.

Ontop of that I DIY for my engine grounding & can feel my EB is much easy/lighter during crank start.

this statement is always true.

see..in engineering there is term "revision".
if there is an issue during 1st batch, that issue will be highlighted, rectified & implemented for the 2nd batch.

for me, if it is not demanding, buying car at its last cycle is the best, provided good engineering practice is adhered.

for example:
toyota vios reliable?
may be the engine & GB yes, but the chassis may be not.
engine & GB using the last gen vios, chassis is new.

Nice. Plan to highlight this to the SC during my next service

btw what do you mean by DIY engine grounding?

Mean...making my own copper cable & connect between the engine top mount to batt(-Ve) terminal. Does feel the engine is much lighter during morning start-up.

Izzit enough 2 litres of coolant that will added with water?

my EB... hehe


Attached thumbnail(s)

any idea what tar remover brand can be used for EB solid white...so many tompok2 tar oledi..

Meguiars. can be found at ACE Hardware

http://www.meguiars.com.my/product/201

smart bro

clay can do wonders. just make sure enough lubricant

i bought mine in 2012 and still have 3/4 of it

This post has been edited by raclette: Dec 11 2014, 06:56 PM

Changed tyre today, check this out. Buy 2 selected tyres get hotel stay...

This post has been edited by alexei: Dec 13 2014, 09:27 AM

Just done my appointment check today @ Pg SC, after communication with wecare (mail). Fix some minor issues as below:

1) Reset the wiper, as stop in middle
2) Tighten the lower arm as minor sound passing bump
3) Break hose breathing for 4 wheel, as brake freeze (hard) sometime
4) Reverse engine die, Software adaptation done. Asked the foreman to service / clean the engine throttle body, he claimed its only applicable for CPS model.

Will need to monitor to see any re-occurrences.

Meanwhile did checked with the foreman on grounding cable, his advice was putting 7 points grounding instead of just 3-5 point.

You were in sungai Pinang sc today?

can someone share their grounding point for exora? plan to DIY for this
what type of cable do we need to use?
TQ

Just sharing

http://kereta.info/2015-new-proton-exora-s...-drl-fog-lamps/

yup bro alewei