i change my CPU from P4 to C2D last nite, and OMG!!! i still can't do OC-ing in BIOS... not to say OC, i cant even enable the FSB thingy... Flashed bios even from F4c to F3 and reset cmos liaw and reset to optimum setting liaw... still cannot... cant adjust the PCI-e one frequency also... (read the previous posts saying that some can put 100 and some 106MHz, while mine cant at all). anymore suggestion that i can try out? also i had formatted my hdd also and my ETC still not working. each an every time i open it my pc will reboot... what is going on??

It should be your graphic card. Try using another one, maybe PCI... Remember to load optimized and clear the CMOS after a successful flash. Disconnect the power cord to your PSU

Edit: GIGABYTE DS3 FAQ by CrazyJohn

This post has been edited by tAmp0i: Aug 22 2006, 04:01 PM

Flashed to F4 official bios should fix it.. Mine using 7300gt also cant OC using F3 and F4 beta bios..

argh, I hit my FSB wall at 425MHz, any ways to push it further? I can't even pass 2 mins of prime test

WEEE~~~ flash back to F4 bios... now can liaw... sigh... tried F4c, Clear CMOS, reset back to optimum, failed OC, tried F3, Clear CMOS, reset back to optimum, failed again... really weird... next time would ask the new user of DS3 to use F4 directly... thanks for the replies guy...

Old bios had known problem for nvidia 7 series card..

New speed. By the way, I'm using Cooler Master Hyper 6+ .. no Intel factory heatsink.

I've been told to use Super Pi 1.5 Mod so here goes:



This post has been edited by masamura: Aug 23 2006, 02:31 AM

I could go up to 380FSB... but I can't use 3DMark for more than 1 minute I would cap my PCI-E at 100MHz, but that's not worth it since the drop in frames per second is so significant. Currently I'm using 140MHz.

Oh and Irene, how did you manage to get your V-Core to only 1.213v? Mine's already at 1.424 at 360X9

This post has been edited by masamura: Aug 23 2006, 01:17 AM

this is my setting... 16.969s @ E6300 (480x7) on DS3



i think this is enuf to proof the stability gua!? i donno where to download the prime thing... search through guru3d liaw...

Edited : Gigabyte air cooling on CPU.

This post has been edited by ddww: Aug 23 2006, 02:10 AM

ehh bro, where dya get those hyundai RAMs arr??
kinda interested here

This post has been edited by gengstapo: Aug 23 2006, 10:14 AM

@ddww

Stress Prime 2004 can be downloaded at http://sp2004.fre3.com/download.htm

E6300 1.86Ghz @ 450*7 with TT Big Typhoon
Gigabyte P965-DS3 F4 Bios
Mushkin DDR2 667 1GB*2@2.1v 5-5-5-15 (Elpida)

1M Super Pi : 18.437s

1M Super Pi
SP2004


Anyone got this kind of ram, still can go higher? will try it later....

got it from my fren oh... he used it for 1 month only and wanna change to performance ram... got it for RM600... worth or not?? HYundai electroNICS C4...

thanks dude... cant prime at 480MHz... my pc shut down terus after 30mins++ so i think its my PSU that reach its limit edi... I WANT MY LIBERTYYYYYY
currently doing well at 450MHz... pass 1 hour liaw... would post up after few more hours... wish me luck...

err.. wher did u get those RAMs??
u running single or dual channel hoh??

i'm using a Gigabyte G-Power Lite air cooling...

Edited : forgot to ask, what how come it shown custom in both of the Prime u all test while mine shows CPU and Memory Stress?? what u guys set in there??

This post has been edited by ddww: Aug 23 2006, 06:01 PM

Dual Channel of coz... got it from Viewnet.

mine is not 1.213v it's sthing wrong with cpuz, showing that vcore no matter what i set in bios.. in bios i set to 1.45vcore.

btw, 3d application is sthing else, if u wanna find max stable clockspeed for 24/7 then u need to test both stresstest (for eg. dual prime) and 3d benchies (for eg. loops of 3dmark03)

if both has no problem, then i believe u wont have any problem either in gaming or in heavy multitasking

This post has been edited by irenic: Aug 23 2006, 07:27 PM

wah......... HYNIX C4!
i thk ur 480x7 is not stable lor since it can only prime 30hrs....

30hrs ? is it mins?

This are my new banchmark for my E6600

I did OC up to 3G but my load temp was around 55C so i lowered it o 2.7G.... collecting money to get my water cooling system..

3ghz


2.7ghz


This post has been edited by savadi: Aug 23 2006, 10:56 PM