I think inside the manual is for illustrate purpose only; there is one option that could let you to change the multiplier

Well, its not found in my bios option somehow.....

have u tried the latest BIOS?

i know older BIOS does not have multiplier selection, and cas latency too!

http://lejabeach.com/Biostar/6100-AM2/6100AM2bios.html

This post has been edited by soulfly: Aug 27 2006, 11:28 AM

the latest bios without cas latency....
tried the latest bios from biostar website, not found.
using CR51A505RH9(recommend by polygon) now which is OC version and not found too but then got bug, lol. temp decrease from 45c to 25c.

and soulfly, u said 6100-am2 bios isn't as good as tf550 because of



memory timing/drive strength setting?
If so, 6100-am2 does have it the first released bios.

This post has been edited by allenultra: Aug 27 2006, 12:20 PM

hm.... isn't that TF550 bios u shown?

just a comparison though.
its the same as my 6100-am2 now....with the old bios.....new bios doesn't show up the memory timing setting.

ah..that's weird.

old bios got... new bios don't have.

ya....that what polygon tested...
I just gather info from his post.

Still, I stuck at cpu 9x multiplier. No "Hammer CPU Multiplier".
And my temp decrease from 45c to 25c.

25'C is very low

CoreTemp also showing the same temperature?

I'm using T-Utility Hardware Monitor that comes with the biostar CD.

It show 25c. Shouldn't be software error after I flashed the bios. (I assume).

Between Asus M2N-E, MSI K9N SLI platinum, ABIT KN9 SLI,which one is the best one for OC?i've try to google around,and reading its specs,but i still can't make my decision.i don't understand what the most important part to lookout in choosing the right mobo,i'm planning to use AMD X2 4200+ or 4400+ ,and no plan to SLI it. Really need help here.Thanks in advance.

T-Utility gave me 'wacko' reading.

Use CoreTemp, it's more accurate.

why my core temp show 44c and my speedfan shows 55c ??

i think speedfan more accurate !!

This post has been edited by ah_fong: Aug 27 2006, 08:06 PM

Speedfan uses hardware sensor

CoreTemp reads temperature direct from the die.

soulfly got any recommend ddr2 800 mhz ?? which one to buy?

Corsair XMS 6400C3 (any type... as long as DDR800 CL3)
G.Skill 1GBHZ/2GBHZ
G.Skill 1GBGA/2GBGA
Mushkin XP-series 6400
TeamXtreem DDRII-800
Kingston Value RAM DDR800 CL5

u missing one.. DFI Infinity..

All Asus M2N-E did you all really check your Vdimm like this??

Vdimm Check And Vmod on M2N-E

able to do Vdimm 3.12v via Vmod

This post has been edited by tachlio: Aug 28 2006, 11:58 AM

that link has been posted before..
if u check this.. http://www.vr-zone.com/index.php?i=3738
it mentioned about 'pencil', i'm not very clear how to do it.. just connect the point?
pencil trick maybe do not need solder.. anyone has clearer guideline..
other thing is not really sure what vdimm been set after pencil it..

@tachlio
Asus already released 0304 bios.. claimed solving memory compatibility..
donno solve the vdimm prob or not.. not try yet.. have u try it?
ftp://dlsvr01.asus.com/pub/ASUS/mb/socket...N-E/M2NE304.zip

This post has been edited by 8tvt: Aug 28 2006, 12:22 PM

Just want to ask fellow TF550 users, what power supply u are using.