hehe soulfy i join the AM2 X2 now~ add me in list yap~

still noob in OC am2 hope all could help~

sorry bout bring back this old page

did the multiple is fixed ??

can i try to put 1:1 or something near to AM2 ??

coz if is 1:1 my ram will be 333MHZ right then i don need to OC my ram then i can use 333as my FSB

sorry about my noob Q

me too happen

i also download latest bios and cpuz ady but same thing happen

i don believe Asus will cheat us , hw about other ppl there?

hw much this board is?

i check my mobo disk it got come with a software " Ai Booster "

it allow me to change my Vdimm to 2.5V

but i see that Soulfy say that m2n-e only allow to 1.95V??

oh ya i go bios and see it really allow to 1.95 ~

later will try use ai booster

FSB : 250
HTT Mul : 5
vCpu : 1.35 ( but CPUz show 1.184v only )
vDimm : 1.9v
DDR Base : 4-4-4-12 1T ( it show 250Hhz at CPUz , did it right? )

i js use super pi 1m and 3dmark05 to test stablity coz no time nw will try more high later

This post has been edited by tachlio: Aug 15 2006, 12:37 PM

i am using 0203 bios

yap it fail to boot up after over 250 fsb

even over 1 also cant

anyway to solve this?

This post has been edited by tachlio: Aug 15 2006, 03:43 PM

i am using Patriok DDR2 667 by using stock timing it is 5-5-5-15 2t
i now put at 4-4-4-12 1T

what value ram do u think is more worth to get , i mean can compatible with my mobo coz seen that asus board is picky ram

corsair value or kingston value ram?

any review did patriok did on this m2n-e hw to test the higher does this ram can do and the stablity

coz i still can change to other ram by this week
please help pls~

This post has been edited by tachlio: Aug 15 2006, 03:51 PM

ya i am using patriok ram , and it got ram stick there if i open it i will viod my waranty so i don know what chip inside

now try using 10 mutiple unable pass 210 fsb also ~ don know y~

i put 3 ady

hope someone can help us~

Hmm - it seems that we'are not the only ones having problems with RAM.
There are only 6 posts but 300+ views.
Also it seems that there no asus representative reads this message board.


What all of us can do, is to mail tsd@asus.com with description of problem and request updated bios/ or another solution. If you are lazy just as I am you can use template I prepared (but I recommend that you change it somewhat)
Remember - if enough of us mails asus it may speed things up.
Asus needs to know that this is serious problem , affecting many of us.
Worst case scenario I expect - we will get straight answer if this problem can be fixed or not.

So don't hesitate and fire up your mail client

Thanks, Christopher

----CUT HERE-------------------
Hello.

I recently bought ASUS M2N-E motherboard.
Your product is advertised as "Exceptionally Overclocking".
However this board suffers from serious bug: DIMM voltage can be set only at 1,95V max.
This not only limits overclocking potential, but also makes impossible to use most 667 and 800 MHz DDR2 memory sticks.
Most of these memory modules require 2,1-2,4V dimm voltage.
Also to my knowledge, many users report RAM stability problems even with major brand memory sticks.
I am really disappointed.

What I would like to now, is:
-is ASUS working on mentioned problems?
-can these bugs be fixed with BIOS updates? Or can they be fixed only by releasing new motherboard revisions?
-if higher DIMM voltage (>1,95V) can be only achieved by releasing updated motherboard PCB design, will my product be replaced free of charge?

I'm looking forward to your answer.

With Regards,

-------------------------------------------------------------------------------------------------
source : Asus Forum

This post has been edited by tachlio: Aug 15 2006, 09:08 PM

FSB : 250
HTT Mul : 3
vCpu : 1.35 ( but CPUz show 1.184v only )
vDimm : 1.9v
DDR Base : 4-4-4-12 1T (by auto is 5-5-5-15 2T)
Bios : update to 320Beta
and 203 also been try same resulf happen

does i need to change to other ram better??

corsair or kingston? or stick with patriot ?

This post has been edited by tachlio: Aug 16 2006, 11:24 AM

the vcore i put at auto setting and i got also try put at 1.365v

i put my to DDR2 667 << maybe this is the problem

so any DDR2 667 ram able don 800DDR? or if the mobo can supply enuf Vdimm then mostly value ram still able do it??

i think i wil try using using DDR533 and 250FSB with lower multiple try can pass 250FSb onot 1st

i also using stock cooling , must try it slow and slow ~ lately quite buzy , later will tell u result

thk a lot ...

hope it solve quickly~

Some Team RAM need ablut 2.0-2.2V to ram at DDR2 800

Team DDR2 800 1.95-2.20V

Asus Problem Discussion

Patriot DDR2 800 2.1V @@

This post has been edited by tachlio: Aug 17 2006, 09:07 AM

if i get at team DDR2 800 with timing 4-4-4-12

but i because my mobo cant supply the voltage it need and i need the run at loose timing

what point i get this ram ~

hope Asus can take note of their bios problem ~

i get this board because it design and Asus, now i think this will be my last asus board not ever get asus anymore~

BTW any good am2 board to recoment??

how about Abit KN9-Ultra??

coz me here hard to find any DFI board and Biostar board also don know whre can i get it~

DFI AM2 Board

This post has been edited by tachlio: Aug 18 2006, 04:21 PM

my frd js get him Abit KN9 non ultra but model i not sure with about 400

i think ultra will about 450 at penang , KL may cheaper even more


and i check him bios it Vdimm can set up to 2.3v ( if i not see wrong is 2.5V) like DFI did

so i wan ask that anything i wan to take note if i get new board , this time don wan get that s*ck board le

pcmoddingmy u use DFI board??

but there write u are using Biostar board??

any coment about the board u are using now?

welcome ^^ u also using patriot??

why choose tforce 6100 instead t550 for more OCablity???

anywhere great to you join us

This post has been edited by tachlio: Aug 19 2006, 12:51 PM