cheee...
i thought my 38 alr not so ok...bt when u say urs is 27sec i was shocked...
manatau it is 45...

This post has been edited by byfc2010: Mar 7 2007, 01:55 PM

take a look at the pic from the link in the 1st post laa...


ram running @ 800mhz proc @ 3003mhz @ 1.48v...

tried going more than 3.0... got to 3.2 but not enough vcore... m2n32sli dlx the max vcore in the bios is 1.6v onli... if can go more.. i think i can get it to 3.5 or something...

aiyok soulfly... where got C2D?? dun have money laa...

juz contact me when u alreadi here...
or if u very.. very malas, than juz post the items to me laa.... hehehee

because ... you copy the SuperPI folder from your friend


This post has been edited by ktek: Mar 7 2007, 08:50 PM

copy ar??/hehehe

ya i copy...but already delete data that save in txt file...then runing it again...but if i copy the result of 1m super pi must got the same result rite???correct me if i totally wrong!!!

I think you should delete pi_rec.dat2 file as it records all the benchmark results which were done in the past.


-pWs-

This post has been edited by -pWs-: Mar 8 2007, 06:20 AM

show us the screenshot before click the 'ok'.. do for 32m one..

Hahaha all 3800++ user quite 'threaten' @ envy by ur amazing SuperPI score Btw just clear the file and run again but from the 1mb test already shown the real score from ur proc.

Hehe..thats the issue...) ...

btw, is the 3800+ more overclockable than 3600+? I saw only 3800+ hit the limit of 2.7Ghz on 1st page...

This post has been edited by kurikuraX: Mar 8 2007, 12:18 PM

okies...i try it n then post it back..thanx 4 helping me dude.



will do it too...



if my proc realy that fast maybe many people wan buy it from me...he he he...



that my false for being so noob....

not juz 3800+ user.. me also suprised that 3800 can achieve that.. if like that better for me to buy a 3800 laa.. cheaper hehehehe...

once saw the 65nm X2 3600+ OCed to 3.0.. dun remember the link... but they onli OC it to do some benching onli.. not 24/7 use....

3800 i think can go to at least 2.9 with some good tweaking la.. try it out... hehehehe...

2.9Ghz I think that processor can consider good chip already.
For my processor, 2.5Ghz already reach hit the temperature walls. Lowsy chip


-pWs-

2.5 onli aa??
didn't try to go up to 2.7 like sempronic proc aa??
try la... u r using the same cooler as he is...

im using TR XP90c onli... if full load my PC will be a heater u know... u can feel heat from the PC... when it's raining and cold outside its good to have a heater near u... hehehehe

most of the dual cores here are overclocking-limited by temperature/cooling system

yah lorr.. my x2 3800 managed to boot at 2.83Ghz but prime failed..full load temp reach 60c

hmm.. tried evrything?? adjusting the vcore, vdimm..??
if alreadi tried evrything then cannot laa... wat can do...

mine can go to 3.2 max @ a very high vcore and vdimm and also a very high temp laa... also dun dare to prime... onli can do super pi.. and the result is almost the same as @ 3003mhz... so, i'm sticking @ 3003mhz laa... the higher it goes, the hotter my room... feels like summer... no, like a drought actually...

edi use 1.575 vcore to achieved that ler.. scared to increase the vcore
increase vcore mean more heat produce.. currently playsafe running at 2.5Ghz@1.275vcore idle 23-25c full load 35-37c

Mine 2.5Ghz ..Temp already 51 when full load
haha


-pWs-

adjust the vcore a lil bit higher laa... mine is 1.48v @ 3003mhz and vdimm is @ 1.95v... idle @ 38c full load @ 55c with TR XP90c + Delta 92mm Fan... hehehe

u guys try la @ least 1.3-1.4 then maybe can go up till 2.7-2.8...
when get there, prime then lower it back to 2.5 la... onli so that u guys know how high the clock can go onli... for future use also.. hehehe

I already used 1.475 vcore to reach 2.5Ghz


-pWs-