am2 3000+ orleans , asus m2n-e, haier 512MB 533 ddr2 <---wahahha im cheap, stock fan, 500w cheap psu

2.25@1.25v, 250 x 9
temp idle = 46c
full load = 51c

The only problem is cannot restart windows. Else wont boot. But if shutdown 1st then power on back ok no problem. Can go higher but need to change PSU + ram i think.

Air zeon is consider cheap ka? One thing for sure using my current psu(colorsit or something the brand) if i up vcore past 1.3, psu will emit hotter air and sometimes smell in the air like something burn. What psu good for moderate OC in the range of rm150-rm200?

Is it really worth it to upgrade from 3000+ to 3800+ x2? Any price slash from amd again within this 2-3 weeks? ha ha ha

Im using m2n-e its quite good for me. decent overclock at 2.4-2.5 @ 1.3v. All of that after 2 times flash the bios. From 0205 to 0304 to 0403. Only after that got no problem anymore. No warm boot problem nothing. But for Rm390 i think u can get better mobo. My decision making was clouded by the fanless heat pipe wahahaha.

Then its ok because its laggy when i do multitasking.

This post has been edited by duarnt: Oct 5 2006, 02:44 PM

Anybody know which shop selling AM2 X2 4000, 4400, or 4800? Im not satisfied with 3000+ LOL!

Ehh soulfly ur new 3200+ can go past 3ghz? Ur old 3000+ was close enough to 3ghz right?

After u got new cooler sure can go higher than that. Im still low on cash to buy better PSU plus m2ne vdimm highest can go 1.95v.

wow 3 minutes diff that a lot...tonight i try to pi 32M see what the outcome for my current setting.

Anyone owned a Gigabyte GA-M55SLI-S4? Does that mobo performed well in O/C? Im thinking of buying that to play2 with SLI. Got tired already playing with M2N-E.

Is it? dang i thought it would at least performed midly as m2n-e. Hard to find any good review related to that particular Gigabyte mobo.

Just wanted to experimenting with other stuff. SLI probaly although ppl already said SLI is nothing but until i tried it i wont be satisfied

Refer in bios for correct vcore. CPUID give incorrect info about vcore on m2n-e. I think its around 1.30-1.35. Try tweaking ram setting.

This post has been edited by duarnt: Dec 25 2006, 01:24 PM

I read somewhere in this thread x2 if run superpi will use 50% of cpu but when i tried mine it 100%. FYI i didnt reinstall windows when changed the proc but it detect the proc correctly as x2 3800+.

Dang i found out that i have been using 1 core for the past 1+ month ha ha ha. No wonder i dont feel any diff. A windows reinstall fix the thing easier. I thought no need one. Superpi use 50% as u all said.

What the default vdimm for ddr2 800? I thing i want to upgrade from currennt ram coz my current ram max can go ddr 834 only. More than that it wont boot. vdimm already at max 1.95.Or should i get one of those dfi board and stick with current ram?

My plan is if the vdimm for ddr2 800 default at 1.8v, even with max 1.95, it can still go up max around 966 or more by OC it. Plus i can go for higher cpu speed.

This post has been edited by duarnt: Jan 16 2007, 11:14 AM

i apply the amd optimizer but it still at 50%. Anyway it not an issue for me or should it be? Are there any degraded performance issue?

What's your idle/full load temp ?

No hesitation! Go just buy!

Much better than m2ne. No more cold boot problem and a couple of issues regarding starting up my system when im O/C. More than 1.95v dram. And umm donno la maybe because i paid more so i feel its better

Same shop la even the same price. Other shop dont have DFI or dont have the nf570. With u using ddr800 i confident u wont regret it.