D/P: RM1.5K.
Monthly: RM270 x 42 months.
Whenever I tell this people will go like

Haha, nice.
Not sure about change sprocket, but, if you want to try, use some formula on the engine RPM and gear ratio to determine the right sprocket so that the final gear is on over-drive (Engine RPM slower than gear RPM).

Monthly is 42 months, or 24 months? Better you confirm with the shop, otherwise you're being ripped off.
Yours is like plan 3 here: http://www.huatbingmotors.com.my/listing/y...135-es-5-speed/

which shop? mind to share? no clutch right?

gila mahal ... sila pergi survey kedai lain .....

try apitech cdi, can set graph. very powerful

i dont think its 24 months. if not it will be cheaper. hehe

i got mine for:

d/p: RM1800
Monthly: RM322
Duration: 24month

Hi there. Gonna pick up my lc later this evening. Any recommended tips on taking care of the bike ? Havent ride in 6 years.

ride like normal ... pickup relax .. dun ride like mad ppl ....

After doing some engine upgrading i notice my bike clutch is slipping very badly. Any recommended what to do?

-Change Clutch Spring(What Brand?)
-Change to 5 or 6 Spring clutch housing?

LC ES 5Speed share clutch spring with which yamaha bike?

Uma Racing 5 spring..good quality..

What riding condition causes that to happen? Sound like incredible mod.

it happen when:-
-Quickly change gear, happen on every gear
-When suddenly want to speed up(full throttle) after maintaining at 120kmh(Engine rev increase but speed stationery)
-When riding with pillion

is it sufficient to just change to racing spring or i really need 5 @ 6 spring clutch housing?

no incredible mod la..still can use electric starter..

This post has been edited by koie06: Jul 18 2014, 04:37 PM

biasa-la ... shift gear cepat cepat .... clutch haus ..... beli original yamaha clutch plate jer ....
some sell in piece by piece .. some sell in one set .. 4 or 5 slide ... got 1 slide dia kecil sikit ....dari lain ... u buy all besar 1 ..

my bike is just 3month old...this problem is due to my upgrade...maybe stock clutch spring cannot withstand the torque...its time to upgrade clutch part i guess...

replacing the small clutch plate to standard size, whats the pros & cons?

This post has been edited by koie06: Jul 18 2014, 08:20 PM

try change just the spring 1st..

has change the spring. problem solved.

LC5S, found oil stains here. after cleanup still appear... anyone experience this?

ignore the clutch spring stain.. i spray chain oil on it

how's your new bike? i'm collecting mine later..

Anybody has mod LC 5S and topspeed able to reach over 160kmh?

i've mod mine but only can get around 14+kmh. tested around 1km only.

This post has been edited by koie06: Jul 23 2014, 09:20 AM