Hi, anybody heard of Maxpro? been offered by SA for Maxpro tinted, saw their facebook, but somehow doesn't have much info about the tinted film selection and their spec....

I did 3M windscreen before, they dint charge to remove old tint.
Recently did another unknown brand, they also dint charge to remove old tint.

Remove existing tint at tint shop cost me rm50 long time ago cz need send puspakom

Hi there. U may want to survey Llumar tint spec & its price. I just got my car tinted at their Damansara Uptown outlet this afternoon. RM1.6K (RM1.4K window tint + RM200 sunroof tint)

just curious, can we claim the windscreen insurance to get a new tinted without replacing the windscreen?
reason being is, just get myself a 2nd hand car, the original tinted get torn off during the puspakom inspection, so now need to get a new tinted for windscreen & the 4 side windows.

Hi guys, just got myself a 2nd hand car, so for puspakom inspection windscreen and front windows tint was removed. Thinking to tint them with JPJ compliance tint that is not too dark

Is there any film with good TSER that meet these requirements?

TIA

Insurance for windscreen only priority for claim new windscreen first. Must change new windscreen and for tinted need topup usually . Free tinted usually using low spec tint. Better to do full car tinted , better value yea. Ala carte without full car usually more expensive outside market.(calculate by pieces)

Hi All Sifu,
thinking to tint my car all side mirror and rear 20% VLT, front 35%VLT. will it be too dark and difficult to see at night?

bro, you talking abt M-Pro or Maxpro?

Was quoted rm1,500 for raytech MC series for size large.. good price or is there better quality packages for that price range?

Is there any perceptible difference between IRR of 85 and 75?

The price difference between the two packages is about RM500 for Raytech.

for budget around 1k I'm considering these few quotations
Raytech AC IRR=65%, TSER=40% RM750
Raytech FC IRR=75%, TSER=48% RM1150
Rhinepro black rescue IRR=90%, TSER=40% RM980

any advice on which is better? i'm confused which number to look at for heat rejection.

did u end up doing tint at shieldsmith?

TSER

IRR is only one light wave. theres 3. use TSER for better comparison

Why the last had high IRR but kinda mid spec TSER?

Done my full car with 3M Crystalline with the great help from @dog999, good workmanship and top notch service. kudos

that's why im confused, the dealer told me tser just a figure, they don't have meter to test it, but IRR they can test for you

wanna give my 2 cents, going by logic, if wrong, i will edit/remove :

lets assume the numbers are correct, then there may be few possibilities:

1. the high IRR applies only to a narrow range within the infrared spectrum, the other IR spectrum may have weak rejection, therefore TSER is lower than expected.

2. high IRR covers wide range of infrared spectrum, but rejection of other heat components of "light" is weak, as TSER includes UV, visible light and infrared (and all of these cause heat too), therefore TSER is lower than expected.

3. IRR is high, if the film is absorptive type, most of the IR is absorbed, over a period of time, there is a cumulative of heat energy from prolonged intense IR absorption that film became a secondary source of heat, therefore TSER is lower than expected.

This post has been edited by Eterman: Feb 23 2023, 04:25 PM

had 2 car with IRR 90% and 99%, the 90% IRR, the VLT follow JPJ spec, and even this, had a much bigger TSER.